AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330171-00-47-10-01-05
Warranty Policy
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
Return Notice
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
How to order?
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Parts Availability
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330171-00-47-10-01-05
-
Product Model330171-00-47-10-01-05
-
Product Parameters3300 5mm Proximity Probes
-
Tariff Code8537101190
-
Country of originUSA
-
Place of shipmentXiamen, China
-
Estimated Shipping Size18x18x1.5cm
-
ManufacturerBently Nevada
-
Weight0.16 kg
-
Unthreaded Length Option0.0 in
-
Overall Case Length Option4.7 in
-
Total Length Option3.3 feet
-
Connector OptionMiniature coaxial ClickLocconnector with connectorprotector, standard cable
-
Agency Approval OptionMultiple Approvals
Description
330171 3300 5mm Probe
1/4-28 UNFthread, without armor
0 0 = 0.0 in
Minimum unthreaded length: 47 = 4.7 in
1 0 1.0 metre (3.3 feet)
0 1Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
0 5 Multiple Approvals
1/4-28 UNFthread, without armor
0 0 = 0.0 in
Minimum unthreaded length: 47 = 4.7 in
1 0 1.0 metre (3.3 feet)
0 1Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
0 5 Multiple Approvals
Information
Overview
Manuals
Technical notes
Product Applications
Mating with the Accelerometer
Features:
- Compact 5mm Probe with 4.7-Inch Case Length
- Patented TipLoc™ Molding Method
- 1.0-Meter Integral Triaxial Cable with Connector Protector
- Complete Component Interchangeability
- Wide Temperature Operating Range
- Multiple Agency Approvals
The 330171-00-47-10-01-05 Bently Nevada 3300 5mm Proximity Probe may still be available for purchase and support from Amikon Limited beyond End-Of-Life (EOL) by the manufacturer (OEM).
Bently Nevada 330171-00-47-10-01-05 3300 5mm Proximity Probe Manuals, Datasheets, Drivers, Link
Important Notice: Other accessories, manuals, cables, calibration data, software, etc. are not included with this equipment unless listed in the above stock item description. All prices are shown in USD.
The probe operates on the eddy-current principle, requiring a -17.5 VDC to -26 VDC power supply (typically -24 VDC) with a maximum current consumption of 12 mA. It delivers a linear output voltage proportional to gap distance, with a reference setup gap of 1.27 mm (50 mils). The 75 Ω triaxial cable construction with FEP insulation ensures signal integrity over the 1.0-meter integral cable run, while the probe's DC resistance of approximately 7.59 Ω ± 0.50 Ω maintains system calibration stability. Supply sensitivity is held below 2 mV per volt of input change, and the system tolerates magnetic fields up to 300 Gauss without significant output drift.
- Oil, Gas & Petrochemical:Vibration on pumps, compressors & liquid handling
- Power Generation:Casing acceleration on turbines, generators & fans
- Chemical Processing:Mixers, centrifuges & production blowers failure prevention
- Mining & Mineral Processing:Predictive maintenance for crushers, conveyors & mills
- Steel and Metal Smelting Mills:Furnace exhaust & combustion blowers in extreme heat
- Pulp, Paper, and Timber Mills:Drying rollers, kiln exhaust & boiler systems
This content has been produced using multiple sources.Amikon takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
Prep the Connector Interface: For wet, humid, or thermal shock-prone environments, apply a light bead of Dow Corning 4 (DC4) electrical insulating compound inside the cable boot. This enhances the IP67 environmental moisture seal.
Align and Connect: Align the 5-pin female connector with the top of the 200150, 200155, or 200157 accelerometer.Engage the Nut: Thread the enhanced coupling nut (designated by the -10 configuration option) onto the sensor casing. Hand-tighten it firmly until it seats completely; the enhanced nut variant prevents loosening under structural machine vibrations.
FAQs
-
What is this 330171-00-47-10-01-05?+The Bently Nevada 330171-00-47-10-01-05 is a specific configuration of the Bently Nevada 3300 5mm Proximity Probe. These eddy-current sensors measure both dynamic and static distances to conductive surfaces.
-
What is the primary purpose of this probe?+The probe acts as an eddy current sensor that tracks the distance between its tip and a conductive target, such as a rotating machine shaft. It captures both static metrics (axial position) and dynamic metrics (radial vibration).
-
What is the target material calibration for this probe?+By default, the factory calibrates these sensors to AISI 4140 steel. If your machine components use a different conductive material, you must request custom calibration upon ordering.
-
What are the material properties of the probe body?+The probe tip is constructed from Polyphenylene sulfide (PPS). The outer case is built from durable AISI 303 or 304 stainless steel (SST).
-
Is the probe tip seal rated for pressure boundaries?+While the probe includes a Viton® O-ring, these items are not pressure-tested prior to shipment. If your application requires a strict pressure boundary seal, you must coordinate custom testing or verification.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- ADDRESS
-
32D UNITS,GUOMAO BUILDING,NO 388 HUBIN SOUTH ROAD,SIMING DISTRICT,XIAMEN