


















Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
I/O MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBD100
Description:Circuit I/O Block
Circuits:8
Voltage:115 Volts AC
Isolation Voltage:1500 Volts
Inputs:16
Dissipation:28 watts
Frequency:50/60 Hertz
I/O MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBD023
Description:Sink I/O block
Voltage:24 Volts DC
Circuits:16
Load current rating:2 Amperes
Selectable Input filter time:10-100 ms
Temperature:0-60 degrees Celsius
I/O MODULE
Series:Genius I-O
Part Number:IC660BBD021
Description:Serial I/O block
Product Description:16 Circuit Block sink I/O Module
No. of circuits:16 I/O circuits
Input signal voltage:24 / 48 VDC
Input processing time:1.7 ms
Isolation voltage:1500 Volts
Output Current:2 Amperes per circuit
Power supply drop out time:10 milliseconds
maximum inrush current:10 Amperes up to 10 ms
Temperature:0-60 degrees Celsius
Humidity:5-95% non-condensing
Product lifecycle:discontinued
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA106
Heat Dissipation:12 Watts
Channel to channel isolation:1500V RMS
Product Description:Current source input block
No. of Inputs:Six (6)
Supported signals:0-20 mA; 4-20 mA
Input Resolution:1 µA
Status LEDs:Unit OK, I/O Enabled
Description:Analog input block
Channels:6
Current:4-20 mA
Voltage:115 Volts AC, 125 Volts DC
Thermal drift:70 ppm
Input impedance:100 ohms
Analog output module
Series:Genius I/O
Part Number:IC660BBA105
Description:I/O block
Product Description:Analog output module
Terminal:32
No. of Outputs:Six (6) analog outputs
Output block:6
Points per common:One group of 6
Resolution:6µA
Output Signals:4-20 mA
Output range:4-20 mA /0-24 mA
Heat Dissipation:12 Watts
Update Rate:25 ms
Block to Block Isolation:1500V for one minute
LEDs (I/O Block):Unit OK, I/O Enabled
I/O MODULE
Series:Rx7i PACsystem
Part Number:IC660BBA104
No. of Inputs:Six (6)
Input signal:4-20 mA
Input signal Resolution:1 µA
Output resolution:6 µA
Block Power, nominal:115 VAC / 125 VDC
Product Description:Current Source I/O Block
Input Resolution:1 microamp
No. of Outputs:2
Output Resolution:6 microamps
Block Power:115 VAC/ 125 VDC
Heat Dissipation:12 Watts
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA103
Weight:4 Pounds
No. of Inputs:Six (6)
Resistance Input:25.0mV to +150mV
Block Power:115VAC / 125VDC
Status LEDs:Unit OK, I/O Enabled
Heat Dissipation:9 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Voltage measurements:-25 mV to 150 mV
Accuracy:8 Hertz
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA101
Weight:4 Pounds
No. of Inputs:Six (6)
Resistance Input:0 to 5000 Ohms
No. of Inputs:6
Input Resolution:0.1 degrees Celsius
Block Power:115 VAC / 125 VDC
Heat Dissipation:7 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Status LEDs:Unit OK, I/O Enabled
Analog Block
Series:Genius I-O
Part Number:IC660BBA100
Product Description:Analog I/O Block
No. of Inputs:4
No. of Outputs:2
I/O Resolution:12 bit + sign
Block Power:115 VAC
Heat Dissipation:6 Watts
Absolute Accuracy:+/- 0.2% of the full scale
Status LEDs:Unit OK, I/O Enabled
Analog input module
Series:Genius I/O
Part Number:IC660BBA026
Product Description:Analog input module
No. of inputs:Six (6) analog inputs
Points per common:One group of 6
Output Signals:4-20 mA
Input Resolution:1 microamp
Heat Dissipation:12 Watts
Resolution:1µA
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
Accuracy:0.1% of full-scale reading
Analog output module
Series:Genius I/O
Part Number:IC660BBA025
Points per common:One group of 6
Output Signals:4-20 mA
Output Resolution:6 microamps
Supply voltage range:18-56 VDC
Output Update frequency:25 ms
Block Power:24/48V DC
Resolution:6µA
Heat Dissipation:12 Watts
Update Rate:25 ms
Status LEDs:Unit OK, I/O Enabled
I/O MODULE
Series:Genius I-O
Part Number:IC660BBA024
No. of Inputs:4
Input Accuracy:0.1% of full-scale reading
Input Resolution:1 microamp
No. of Outputs:2
Output Accuracy:0.15% of full-scale reading
Output Resolution:6 microamps
Block Power:24/48 VDC
Heat Dissipation:12 Watts
THERMOCOUPLE INPUT MODULE
Brand:GE Fanuc
Series:Genius I-O
Part Number:IC660BBA023
No. of Inputs:6
Block Power:24/48 Volts DC
Heat Dissipation:9 Watts
Block to Block Isolation:1500 Volts
Group to Group Isolation:300 Volts
Accuracy:8 Hertz
Status LEDs:Unit OK, I/O Enable
GE Fanuc I/O Block
Series:Genius I-O
Manufacturer:Emerson Automation / GE Fanuc (formerly)
Part Number:IC660BBA020
Product Description:Combination I/O module
No. of Inputs:Four (4) analog inputs
No. of Outputs:Two (2) analog outputs
I/O Resolution:12 bits + sign
I/O Update Frequency:Once every 4 ms
Supply voltage range:18-56 VDC
Block Power:24/48 Volts DC
Heat Dissipation:6 Watts
Resolution:12-bit + sign
Status LEDs:Unit OK, I/O Enabled
Block to Block Isolation:1500 Volts
I/O MODULE
Series:Genius I/O
Part Number:IC660BBD020
Description:Sink I/O block
Product Description:Source Block I/O
Voltage:24/48 Volts
No. of I/O:16
Compatibility:90-30 PLCs
Load current:2 Amperes
Operating voltage:18-56 VDC
Input Impedance:1.7 ms with filter
Nominal voltage:24VDC / 48 VDC
Temperature:0-60 degrees Celsius
Circuit:16
Output response time:1.0 msec
Filter time:5 to 100mS
I/O MODULE
Series:Genius Block I/O
Part Number:IC660BBD024
Module type:Discrete block I/O
Input voltage:12/24VDC
Input Impedance:3.3k Ohms
Block output current (total):16 Amps
Output turn-on delay:0.5 ms, maximum
Output Diagnostics:Switch Fault
Description:Block I/O
TTL:5 Volts
Input points:32
Isolation:850 Volts
Temperature:0-60 degrees Celsius
Compatiblity:Series 90-30, 90-70
Genius Block I/O module
Series:Genius I/O
Manufacturer:Emerson Automation / GE Fanuc (formerly)
Part Number:IC660BBD022
Description:Source I/O block
Product Description:16 Source I/O circuits
Circuits:16
No. of I/O:16
No. of circuits:16 I/O circuits
Points per common:One group of 16
Input signal voltage:24 / 48 VDC
Load current:2 Amperes
Operating voltage:18-30VDC
Input processing time:1.7 ms
Dimensions:8.83 x 4.42 x 3.56 inches
Nominal voltage:24VDC
Communication protocol:Genius Protocol
Output Current:2 Amperes per circuit
Max. ripple:10%
Output turn on deplay:1 millisecond
Output response time:1.0 msec
Maximum switching frequency:Once per second
Temperature:0-60 degrees Celsius
Filter time:5 to 100mS
Bus Controller Module
Series:Genius Bus I/O
Part Number:IC697BEM731
Operating Voltage:5.0 Volt DC
Backplane Current:1.3 Amps
Bus Cable:Belden 9182 type cable
Module Width:Single Slot
Description:Genius I/O Bus Controller
Application:IC66 PLC System
Location:IC66 PLC Rack
Connectors:3PL and 1PL Ports
LED Indicators:3 LED Indicators
Average Weight:2.0 Pounds

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.