PART NUMBER SEARCH
AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Siemens
- Siemens Simatic S7
- ET 200SP
- 6DL1134-6UD00-0PK0
In Stock
Fast Shipping Available
· Product image is representative; revision or series may vary. Contact us to request a specific version.
- Customs & Documentation
- We prepare clear, order-specific documentation for every international shipment, including the commercial invoice, packing list and available product or compliance documents. Before dispatch, our logistics team confirms the consignee details, declared value, shipping terms and destination requirements with you. Tracking information is provided after shipment, helping your team prepare for import clearance with confidence.
Documents checked before dispatch · Shipment details confirmed · Global tracking provided
- Payment
- Payment is by bank wire only in RMB/CNY, GBP, EUR or USD. Amikon does not accept credit cards or provide credit terms. Cleared payment is required before shipment unless the written quotation expressly states otherwise.
- Product Condition
- Factory New These are new and current items that are procured directly from the manufacturer.
New In Sealed Package Parts are new. They have not been used and still have their original package seal intact.
New in Original Package These parts are new. The packages were not originally sealed by their original manufacturer.
-
20+
years in automation -
ISO 9001
certified quality system -
12 months
amikon warranty -
2-hour reply
from your account manager -
Success Story
solutions in action
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
PRODUCT DESCRIPTION
6DL1134-6UD00-0PK0 Isolated Four Channel HART Input
Siemens 6DL1134-6UD00-0PK0 is a four-channel isolated HART analog input module for SIMATIC ET 200SP HA. It acquires current signals from compatible two-wire or four-wire process transmitters within the configured high-availability distributed I/O station.
The module measures 0–20 mA and 4–20 mA inputs through 250 Ω input resistance, with up to 16-bit resolution including sign. Channel diagnostics and HART communication provide configured measurement and device information. The sensor supplies are electronically protected, while the isolation ratings and redundant arrangement depend on the selected terminal blocks and system configuration.
The module measures 0–20 mA and 4–20 mA inputs through 250 Ω input resistance, with up to 16-bit resolution including sign. Channel diagnostics and HART communication provide configured measurement and device information. The sensor supplies are electronically protected, while the isolation ratings and redundant arrangement depend on the selected terminal blocks and system configuration.
BEFORE YOU BUY
Confirm the complete isolated four channel hart input
ACTUAL APPLICATIONS
Application context for 6DL1134-6UD00-0PK0
6DL1134-6UD00-0PK0 supports process measurement in chemical production, water treatment and energy generation. Compatible HART transmitters and HA terminal blocks determine suitability. Measurement range, sensor supply loading and the configured control-system version must match the installation.
-
01 · CHEMICAL PROCESSING
Chemical Production and Process Measurement
Chemical Production Process MeasurementPetrochemical Processing and Monitoring -
02 · WATER & WASTEWATER
Water Treatment and Process Monitoring
Water Treatment Process MeasurementWastewater Processing and Monitoring -
03 · ENERGY PRODUCTION
Energy Production and Process Measurement
Power Generation Process MeasurementIndustrial Energy Process Monitoring
Technical specifications for 6DL1134-6UD00-0PK0
-
Product Model6DL1134-6UD00-0PK0
-
Product ParametersIsolated Four Channel HART Input
-
In stock2 units
-
ManufacturerSiemens
-
Analog current inputs4 channels; 2-/4-wire HART
-
Rated current measurement ranges0–20 mA; 4–20 mA
-
Input resistance250 Ω
-
Input destruction-current limit30 mA maximum
-
Maximum measurement resolution16 bits including sign; filtering-dependent
-
Nominal module supply24 V DC
-
Permitted module voltage19.2–28.8 V DC
-
Supply current demand184 mA unloaded sensor supply; 234 mA maximum at 1.5 kΩ sensor-supply load
-
Sensor supply current capacity23.5 mA/channel; 88 mA/module
-
Typical power loss1.8 W
-
Input address allocation9 bytes normal; 29 bytes HART; 16 bytes MultiHART
-
Maximum shielded signal cable800 m
-
Linearity and repeatability±0.01% linearity; ±0.05% repeatability at 25 ℃
-
Current measurement error limits±0.1% at 25 ℃; ±0.5% over operating range
-
Operating temperature limits−40–70 ℃ horizontal or vertical; observe derating
View all additional
Alternative Names
6DL1134-6UD00-0PK0
ET 200SP HA AI 4xI HART isolated module
Four-channel isolated HART current-input module
SYSTEM & REPLACEMENT CHECK
Information needed before ordering
Three direct checks to secure your system integration and minimize ordering risks.
Information
System integration
Replacement check
Manuals & support
SYSTEM INTEGRATION
Integrate 6DL1134-6UD00-0PK0 isolated four channel hart input
Configure the AI 4xI HART isolated HA module with the supported terminal-block arrangement and engineering version. The exact datasheet lists TIA Portal V17, STEP 7 V5.6, PCS 7 V9.1 and PCS neo V3.0 integration levels.
Match each transmitter to the 0–20 mA or 4–20 mA range and the 250 Ω input resistance. Check sensor-supply loading and select the normal, HART or MultiHART address allocation in the project.
Use the applicable HA module and system instructions for terminal assignments and commissioning. Validate scaled values, HART information, channel diagnostics and any configured redundancy before accepting the process measurement paths.
Features:
- Analog current inputs: 4 channels; 2-/4-wire HART
- Rated current measurement ranges: 0–20 mA; 4–20 mA
- Input resistance: 250 Ω
The 6DL1134-6UD00-0PK0 isolated four channel hart input requires appropriate configuration before system integration and commissioning.
INTERCHANGEABILITY
Verify 6DL1134-6UD00-0PK0 isolated four channel hart input
Match 6DL1134-6UD00-0PK0, its isolated current-input execution and the selected terminal blocks before exchange. Other HA analog modules can differ in isolation, supported signals and engineering requirements.
Retain channel ranges, smoothing, HART settings, address allocation and transmitter identification. Record wiring and terminal-block execution because permissible isolation ratings differ between push-in and D-sub arrangements.
Restore the accepted parameters and compare every affected measurement with a controlled reference. Check channel diagnostics and HART communication, then retain the final configuration and test record.
Features:
- Analog current inputs: 4 channels; 2-/4-wire HART
- Rated current measurement ranges: 0–20 mA; 4–20 mA
- Input resistance: 250 Ω
The 6DL1134-6UD00-0PK0 isolated four channel hart input requires replacement verification against the complete installed configuration and current manufacturer documentation.
DOCUMENTATION STATUS
Browse the Manuals, Datasheets, Official Documents, Links
Important Notice: The linked files are Amikong-hosted reference documents. Match their product identity and scope to the supplied assembly, and consult the applicable manufacturer instructions before use. Accessories and additional documents are included only when expressly listed in the quotation.
Features:
- Verify document identity before procurement or installation
- Match the complete order to the manufacturer document scope
- Accessories are supplied only when listed in the quotation
Documentation for the 6DL1134-6UD00-0PK0 isolated four channel hart input must be checked for document applicability before installation or commissioning.
Also searched as
Important notice
Manuals, software, firmware, cables, calibration data and accessories are included only when listed in the quotation. AMIKON is an independent supplier and is not affiliated with or authorised by the manufacturer.
This content has been produced using multiple sources. Takes no responsibility for the accuracy of this information. Always consult the original equipment manufacturer for the most up to date instructions and information.
BUYER INFORMATION
Commercial terms without hidden steps
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
01
Shipping & delivery
-
DispatchEligible stock: same / next day
-
CarriersDHL, FedEx or UPS
-
Ship fromXiamen, China
-
Packed size2.25 × 11.5 × 13.8cm
-
Shipping weight0.16kg
-
-
02
Payment & customs
-
PaymentBank transfer (T/T)
-
CurrenciesUSD · EUR · GBP · RMB
-
Credit cardsNot accepted
-
HS reference8538900000
-
OriginGermany
-
-
03
Warranty & returns
-
Warranty12 months from AMIKON
-
InspectionLabel, condition and packing checks
-
ReturnsPrior RMA authorisation required
-
CompatibilityConfirm before order
-
OEM warrantyDoes not apply
-
Your written quote confirms the product identity, price, availability, lead time, warranty and shipping terms before payment.
-
Part checked
Full suffix recorded -
Condition checked
Label and appearance -
Packing checked
Antistatic protection -
Tracking supplied
Established couriers -
Sandy Lin
Dedicated account manager · 15+ years
FREQUENTLY ASKED QUESTIONS
Questions buyers ask about 6DL1134-6UD00-0PK0
Direct answers about identity, compatibility, stock, warranty, payment and shipping.
-
Which current ranges can the four isolated HART inputs measure?
The documented ranges are 0–20 mA and 4–20 mA, each with 250 Ω input resistance. Transmitter and channel configuration must match. -
What address space changes when HART information is enabled?
The module uses 9 bytes normally, 29 bytes with HART and 16 bytes with MultiHART. Include the selected allocation in the station configuration. -
Is sixteen-bit resolution independent of interference filtering?
No. Sixteen bits including sign is the maximum; the datasheet specifies lower resolution for some interference-suppression selections. -
How much sensor-supply current is available per channel?
The maximum is 23.5 mA per channel and 88 mA for the module. The sensor arrangement must remain within both limits. -
Does terminal-block selection affect this module’s isolation ratings?
Yes. The datasheet distinguishes push-in terminal blocks from D-sub versions. Apply the rating for the actual terminal-block execution. -
What measurement error is specified at the reference temperature?
The basic current error limit is ±0.1% of the input range at 25 ℃; the operating limit over the temperature range is ±0.5%. -
Which HART configuration details are needed for a spare-module quotation?
Provide 6DL1134-6UD00-0PK0, terminal-block execution, transmitter wiring type, selected HART mode and control-system version so the offered module can be matched. -
What should be verified when receiving this isolated HA analog module?
Check the full order code, AI 4xI HART isolated designation and connector condition. Compare firmware and terminal-block compatibility with the approved configuration before fitting it.
READY TO VERIFY YOUR PART?
Get a 6DL1134-6UD00-0PK0 quote with price, lead time and revision check.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Success stories Amikong News Technical Resources Why choose us FAQs
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
