INPUT COUPLING UNIT
KS D211 B101: INPUT COUPLING UNIT ICU
Power Supply:24 V DC
Input Voltage Range:0–10 V DC
Input Current Range:4–20 mA
Response Time:< 10 ms
Input Voltage: 24 V DC or 110/230 V AC
Output Voltage: Typically 24 V DC
Output Current: 0.5 A per output channel
Operating Temperature Range:0°C to 60°C (32°F to 140°F)
3ADT220104R0005
DISCONTINUED BY MANUFACTURER
DEVICENET ADAPTER NDNA-02
FIELDBUS DEVICENET
24VDC
3WATT
Tariff Code: 8504909900
Country of Origin: Finland
Power Supply: +24V DC
Power Consumption: 5 Watts maximum
Operating Temperature: -40°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
Vibration: 0.03 g rms per axis, 5 to 500 Hz
Shock: 15 g, half-sine, 11 ms duration
Local Bus Power 12 VDC at 150 mA
Bussed Field Power 12 VDC at 600 mA
Field Circuit 24 VDC at 32 mA/Ch
Ambient Temperature -40 °C to +70 °C
Shock 10 g half-sine wave for 11 ms
Vibration 1 mm peak to peak from 2 to 13.2Hz;
0.7 g from 13.2 to 150 Hz
Airborne Contaminants
ISA-S71.04 –1985 AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing
Number of output channels:16, isolated
Output signal:4 to 20 mA
Allowable load resistance:0 to 750 Ω
Circuit-open detection:Less than 0.65 mA
Accuracy:±48 µA
Data update period:10 ms
Drift due to ambient temperaturechange:±16 µA/10 ˚C
Input Channels: 32
Accumulated InputFrequency: NA
Galvanic Isolation:1500 Vac rms or ±1500 Vdc
Digital Input:90-132 Vac rms
Sense Current:3.5 mA minimum
Absolute Delay AcrossInput Filter and Isolation:25 ms maximum
Frequency Range:47-63 Hz
System Supply (24V) : 22W
Sustained Working : ±250V dc
Maximum Withstanding : ±2.5kV dc
System Supply Voltage Range : 20 to 32Vdc
Operational Output/Field Voltage Range : 18 to 60V dc
Channel to Channel Crosstalk : >-40dB
Field Supply at 24V (0.75A per channel) : 18W
Current input WD 1 mA
Internal voltage drop max. 2 V at 500 mA load
Admissible line resistance max. 11 Ω
max. lamp load 10 W
max. inductivity 1 H
max. capacity 100 μF
Output leakage current max. 500 μA
Line short-circuit 0.7...0.8 A
Line break 2...8 mA
Voltage: 0–10 V DC, ±10 V DC
Current: 4–20 mA, 0–20 mA
Number of Channels: 16 channels
Sampling Rate: Configurable
Resolution:16-bit ADC
Supply Voltage: 24 V DC (±10%) redundant inputs
Power Consumption: ≤5 W (typical)
Isolation: 1500 V AC
Input Voltage Range:24 V DC nominal
Input Voltage Tolerance:18 V DC to 32 V DC
Output Voltage:5 V DC ±1%
Output Current (Max):4 A
Ripple and Noise:< 50 mV peak-to-peak
Power Output:Up to 20 W
Efficiency:> 85% (typical)
IsolationInput to Output: 500 V DC
