ALL MANUFACTURERS

DC sink I/O terminal block

Series:Genius I/O
Voltage Ratings:12/24 Volts DC
Operating Temperature:0 to 60 degrees Celsius
Storage Temperature:-40 to 100 degrees Celsius
Relative Humidity:5%-95%, Non-condensing

Terminal block

Voltage Rating: Up to 250V AC/DC
Current Capacity: Typically up to 10A
Operating Temperature: -40°C to +70°C
Humidity Tolerance: 
Up to 95% non-condensing

Micro Controller

DC Inputs: 16
DC Outputs: 1 (24 V)
Relay Outputs: 11 (Normally-Open), 2 A
Nominal Power Requirement: 100-240 V
Voltage Type: DC
Series: VersaMax

I/O Expansion Unit

Power Supply:DC 24V
Digital Input: Typically 24V DC
Operating Temperature: 
Typically 0 to 50°C (32°F to 122°F)
Storage Temperature: 
Typically -20°C to 70°C (-4°F to 158°F)
Humidity: 30% to 85% RH, non-condensing

Expansion Unit

EXPANSION MODULE 
PLC 90-10A 
ADDITIONAL UNIT 1/056

Embedded Single Board

Up to 512MB PC100 SDRAM
(PC133 stepped down to 100 MHz)
Built-in SVGA support with 4 Mbytes DRAM display cache
Built-in dual 10/100 Mbit Ethernet
IDE drive support
Floppy drive support
Two RS232 serial ports
Dual USB ports
Real-Time clock/calendar
Front panel reset switch
Miniature speaker
Keyboard/Mouse port

CONTROL COMMUNICATION GATEWAY

Input Voltage: 24 VDC nominal 
Power Consumption: ≤ 15 W
Ethernet Ports: Dual 10/100 Mbps
Operating Temperature: -30°C to +70°C (-22°F to +158°F)
Storage Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity: 5% to 95% non-condensing
Data Transfer Rate: Up to 100 Mbps

SPINDLE DRIVE BOARD

POWER CONNECTION MODULE
DC300 SPINDLE DRIVE BOARD
CNC
Input/Output: typically 0-10V, 4-20mA
Operating Temperature Range: Typically -40°C to +70°C
Power Input: Receives AC or DC

MICRO ANALOG BOARD

Input/Output: 
typically 0-10V, 4-20mA
Operating Temperature Range: 
Typically -40°C to +70°C
Function: 
Processes and converts analog signals

Digital I/O Module

Nominal Voltage Options: 
24 VDC, 48 VDC, 125 VDC, or 250 VDC.
Input Voltage Range: ±20% of nominal value
Logic 0 (Low): 0-3 V
Logic 1 (High): 15-250 V 
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Humidity: 5% to 95% (non-condensing)

CONTROL COMMUNICATION GATEWAY

Power Supply: Typically 24V DC
Operating Temperature Range: Typically -40°C to +85°C
Storage Temperature Range: -40°C to +85°C.
Humidity: humidity up to 95% (non-condensing).

TB Option Card

the DC-300 drive
Operating Voltage  24V DC
Operating Temperature Range: -10°C to +60°C
Storage Temperature Range: -20°C to +70°C

CMOS MEMORY BOARD

PC BOARD ASSEMBLY
CMOS MEMORY BOARD
Memory Capacity: 128KB to 1MB
Operating Voltage:operates on +5V DC
Operating Temperature: 0°C to +60°C 
Storage Temperature: Typically -40°C to +85°C.
Humidity: Generally 5% to 95% non-condensing

Terminal Board Relay Card

MCF/ POWER SUPPLY CARD
SPEEDTRONIC / MARK V
MOTOR FIELD CONTROL

Contactor

Contactor Includes 
CR353XAAB 
KIT 90Amp 240/480/600V

Discrete input module

Input voltage 0 to +30VDC,+24VDC nominal
On state voltage +15 to +30VDC
Off state voltage 0 to +5VDC
Off state current 2.0 to 5.5mA0 to 0.5mA
Off response time 0.5ms maximum
Configurable filtertime0 ms, 1.0ms (default), or 7.0ms
Input impedance 10kOhms maximum 

Extended Analog I/O board

Series Speedtronic Mark V
Part Number DS200TCQBG1B
Functional Description RST Extended Analog I/O Board
Functional Acronym TCQB
Used With TCQA Boards

Extended Analog I/O Board

Series: Mark V
Product Type: Analog I/O Board
Proximitor Inputs
LVDT/LVDR Inputs
Two Regulator Milliamp Outputs
LM Vibration Inputs

Safety Controller Board

UCSB CONTROLLER MODULE
256 MB DDR2 SDRAM
600 MHZ INTEL EP8059
28 VDC

Series: Mark VIe
Product Type: Controller Card
Microprocessor: Intel Pentium M Processor 1.6 GHz
Memory: 256 MB
Operating System: QNX Neutrino

Motor Management Relay

non-isolated RS232 port, RS485 port
<200 ms
2000 m (max)
-40°F (-40°C) to +140°F (+60°C)
1 A and 5 A secondary

INPUT MODULE

INPUT MODULE
32POINT
LOGIC
SERIES 90-30
POSITIVE/NEGATIVE
7 AMP MAX
24 VDC

Discrete Input module

Series:Series 90-30
Part Number:IC693MDL752
Product type:Digital I/O
Product Description:Discrete output module
Compatibility:GE Fanuc 90-30 PLCs
No of Channels:Thirty-Two (32)
Output points:32
No. of output groups:Four (4)
Output groups:4
Channels per group:Eight (8)
Maximum inrush current:4.6 A for 20 ms
Output connection:2 x 24-pin connectors

OUTPUT MODULE

Brand:GE Fanuc
Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius

POWER SUPPLY

IC694PWR321
POWER SUPPLY
120/240 VAC
125 VDC STANDARD