
















1784KTCS
DISCONTINUED BY MANUFACTURER
CONTROLNET SCANNER CARD
REQUIRES 16 OR 32-BIT ISA/EISA EXPANSION SLOT
DUAL PORT BNC
640 MA AT 5 VDC
ControlLogix Isolated Analog Output Module
1756OF6VI
OUTPUT MODULE
6 CHANNEL ISOLATED
ANALOG
+/- 10.5 VDC
14 BITS
ISOLATED CONTROLLOGIX
ontrolNet Adapter Module
1747ACN15
DISCONTINUED BY MANUFACTURER 2014-12-30
I/O ADAPTER
SINGLE-PORT
CONTROLNET
1 BNC AND 1 NAP RJ-45
8-PIN WITH SHIELD CONNECTORS
Rectifier Interface Module
Rectifier interfaces Module
PER3 for infeed
regenerative feedback Supply units
with Designs H and K
3 AC 500-575V
50/60 Hz and 660-690V 3AC
Logic module
Status indicators:Red and Green LED
Marine Certified:Yes
Operating Temperature:0-55 Degree Celsius
Power input: 24VDC
Power Dissipation: 70 Watts
Part Number/Catalog No. 2711P-RP8D
Nonvolatile Memory 512 MB
Input 24 VDC
RAM Memory 512 MB
Power Distribution Module
Nominal AC Input Voltage 100 - 240 VAC
AC Input Voltage Range 85 to 264 VAC
DC Input Voltage Range 90 to 375 VDC
Frequency 43 to 67 Hz
Nominal Current 3.2 – 1.0 A
Efficiency > 90% typ. (24 W)
Inrush Current (max) Typ. < 30 A
Power Factor Correction Active power factor correction to better than 0.92
Voltage Phase Type Single phase (AC voltage)
PanelView Plus 6 700 Color Terminal Touch Screen
Operator Input:Touch
Lifecycle status:End of life
Resolution:640 x 480, 18-bit color graphics
Touch:Analog Resistive
Integrated ports:Ethernet, RS-232, 2 USB host
Input Voltage range:18-30VDC
Product Line:Panelview 6 Plus
Input Type:Touchscreen
SLC 500 DeviceNet Scanner Module
Module Width:Single Slot
Compatible controllers:SLC 5/02 or later
Pass through:Supported
Communication Port:One (1) DeviceNet
Data Transfer speed:125Kbps
Storage Temperature:-40 to 85 C (-40 to 185 F)
Vibration: Tested 5 g @ 10-500Hz per IEC 68-2-6
Operating Shock:30 g peak acceleration, 11(+1)ms pulse width
Series:SLC 500
1398DDM005DN
DISCONTINUED BY MANUFACTURER 2010-07-29
ULTRA 100 SERIES
UNIVERSAL DRIVE WITH DEVICENET
500 WATT
SINGLE PHASE
100-240V AC @ 50/60 HZ
7.5A PEAK
Power Supply Module
Modicon Premium
input current 1500mA
secondary power of 30W
19.2 to 30VDC
Enhanced Network Interface Module
Manufacturer:ProSoft Technology
Series:ControlLogix
Module width:Single slot
Compatible rack:ControlLogix chassis
Data size:10,000 words, 16-bit registers
Data Rate:10 / 100 Mbps
Operating Temperature:32° F to 140° F (0° C to 60° C)
Storage Temperature: -40° F to 185° F (-40° C to 85° C)
Operating Shock:30 g
Relative humidity:5% to 95% (without condensation)
Power Supply
1771P5E
DISCONTINUED BY MANUFACTURER
POWER SUPPLY
24 VDC
3 AMP
5 VDC OUTPUT
8 AMP OUTPUT
2 SLOT
ControlNet Remote I/O Adaptor
1771ACNR15
DISCONTINUED BY MANUFACTURER 2012
TWO-PORT REDUNDANT MEDIA CONTROLNET (1.5 AND BEYOND) COMMUNICATION INTERFACE MODULE
CONTROLNET 1.5 AND BEYOND
1771 I/O ADAPTER. ONLY THE 1771-ACNR15 CAN BE USED WITH THE CONTROLNET PLC-5 BACKUP SYSTEM (1785-CHBM)
Tariff Code: 8517620050
Country of Origin: United States
Analog Input Module - 2AI High Feature
SIMATIC DP
Electronics module
2 AI I High Feature for ET 200S
15 mm width
Cycle time per module: 0.5 ms, +/-20mA
15 bit+sign, 4.. 20mA
15 bit, Operationallimit
+/-0.1% with SF LED
1336SMCBSPI
DISCONTINUED BY MANUFACTURER
MAIN DRIVE BOARD
MAIN INVERTER CONTROL
5 VDC
WITHOUT LANGUAGE MODULE
1336MCBSP1
DISCONTINUED BY MANUFACTURER
ALLEN BRADLEY
PC BOARD MAIN CONTROL
1336F B-G FRAME
DeviceNet Adaptor
NETWORK ADAPTER
FLEX I/O
DEVICENET
24 VDC
125/250/500 KBPS
OPEN STYLE
DIN RAIL MOUNT
IP20
MicroLogix 1400 PLC
12 DIGITAL FAST 24 VDC INPUTS
8 DIGITAL 24 VDC INPUTS
6 RELAY OUTPUTS
3 FAST 24 VDC OUTPUTS
3 NORMAL 24 VDC OUTPUTS
4 ANALOG
MICROLOGIX 1400

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.