AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330171-00-33-50-01-05
In Stock
Ships by Thursday, September 3
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330171-00-33-50-01-05
-
Product Model330171-00-33-50-01-05
-
Spare Model330171-00-33-50-01-05
-
Product Parameters5 mm Proximity Probe
-
Tariff Code90318090
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size0.52x8.38x500cm
-
ManufacturerBently Nevada
-
Weight0.32 kg
-
Unthreaded Length Option0.0 in (0 mm)
-
Overall Case Length Option3.3 in (83.8 mm)
-
Total Length Option5.0 m (16.4 ft)
-
Connector OptionMiniature coaxial ClickLoc connector with connector protector, standard cable
-
Agency Approval OptionMultiple Approvals
-
Probe Thread1/4-28 UNF-2A
-
Armor ConfigurationWithout armor
-
Probe Tip Diameter5.2 mm (0.21 in)
-
Recommended Gap1.27 mm (50 mils)
-
Linear Range0.25 to 2.3 mm (10 to 90 mils)
Description
Bently Nevada 330171-00-33-50-01-05 is a 3300 5 mm non-armored proximity probe with a 1/4-28 UNF thread, 3.3-inch overall case length and 5.0-metre total length.
The longer case supports installations that require additional mechanical reach while the five-metre lead connects to a compatible five-metre 3300 5 mm Proximitor Sensor. Verify thread engagement, tip clearance, cable protection and final gap before service.
The longer case supports installations that require additional mechanical reach while the five-metre lead connects to a compatible five-metre 3300 5 mm Proximitor Sensor. Verify thread engagement, tip clearance, cable protection and final gap before service.
Information
Overview
Manuals
Product Applications
Compatibility
Lifecycle & Replacement
Features:
- Long-case 3300 5 mm probe with 1/4-28 UNF thread
- 0.0-inch unthreaded length
- 3.3-inch overall case length
- 5.0-metre non-armored total length
- ClickLoc connection for the matching five-metre system
The probe supports shaft-vibration, axial-position, Keyphasor and speed measurement through a compatible 3300 5 mm Proximitor Sensor system. Verify the complete probe, cable, connector, mounting, target material and approval configuration before commissioning.
330171-00-33-50-01-05 Bently Nevada: Verify the exact order code, probe geometry, cable length, connector, compatible 3300 5 mm system and controlled Bently Nevada documentation before installation or replacement.
Bently Nevada 330171-00-33-50-01-05 3300 5 mm Proximity Probe Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
- Relative shaft-vibration measurement through deeper probe mounts
- Axial-position measurement where additional probe-case reach is required
- Keyphasor phase-reference sensing at recessed shaft targets
- Tachometer speed measurement using the long-case probe geometry
- Overspeed measurement with a direct five-metre probe lead
Use 330171-00-33-50-01-05 only in a documented Bently Nevada 3300 5 mm measurement chain.
Verify the 3.3-inch case option against the bracket, housing depth and locknut location.
Connect the five-metre lead only to the compatible five-metre Proximitor Sensor configuration.
Limit 1/4-28 thread engagement to the manufacturer-documented maximum.
Protect the non-armored cable and maintain required bend radius and probe-tip spacing.
Do not approve a shorter-case 330171 variant as mechanically equivalent without a dimensional review.
Verify the 3.3-inch case option against the bracket, housing depth and locknut location.
Connect the five-metre lead only to the compatible five-metre Proximitor Sensor configuration.
Limit 1/4-28 thread engagement to the manufacturer-documented maximum.
Protect the non-armored cable and maintain required bend radius and probe-tip spacing.
Do not approve a shorter-case 330171 variant as mechanically equivalent without a dimensional review.
Retain the installed mounting-depth and probe-reach measurements with the maintenance record.
Check the long stainless-steel case for straightness, thread damage and contamination.
Inspect the non-armored five-metre cable along its complete accessible route.
Preserve the matching five-metre Proximitor Sensor and verified channel identification.
Re-establish the documented gap, clearances and crosstalk checks after replacement.
Contact Amikon with the full 330171-00-33-50-01-05 code for replacement planning.
Check the long stainless-steel case for straightness, thread damage and contamination.
Inspect the non-armored five-metre cable along its complete accessible route.
Preserve the matching five-metre Proximitor Sensor and verified channel identification.
Re-establish the documented gap, clearances and crosstalk checks after replacement.
Contact Amikon with the full 330171-00-33-50-01-05 code for replacement planning.
Alternative Names
330171-00-33-50-01-05
330171 Long-Case 3300 5 mm Probe
5 m 3.3 in Case Non-Armored Proximity Probe
Technical notes
Verify the complete 330171-00-33-50-01-05 identification before replacement. Confirm the 0.0-inch unthreaded length, 3.3-inch overall case length, 5.0-metre total length, maximum permitted thread engagement, non-armored cable protection, five-metre Proximitor Sensor compatibility and final probe gap.
FAQs
-
Why would an engineer select the 3.3-inch case instead of the shorter case?
+The longer case provides additional mechanical reach through the mounting arrangement. Confirm that it positions the probe tip correctly without creating excessive thread engagement or interference. -
What is the maximum permitted thread engagement for this 1/4-28 probe?
+The official dimensional information limits 1/4-28 thread engagement to 0.375 inch. Check the bracket or housing depth and locknut position before tightening. -
Can this 3.3-inch case replace a 1.2-inch case with the same cable length?
+Not automatically. The longer body changes the mounting position and available tip reach even though the thread and five-metre cable option may match. -
How should the unarmored cable be protected near the machine casing?
+Provide suitable mechanical routing and strain relief, avoid rubbing, impact and hot surfaces and maintain the minimum bend radius without clamping the cable excessively. -
Which installations benefit from the additional case reach?
+It can suit brackets, housings or access geometries where the probe tip must extend farther to reach the shaft target while preserving a serviceable locknut position. -
Can the probe body be exposed to process liquid or pressure without review?
+Do not assume pressure sealing from the stainless-steel case. Verify the mounting adapter, sealing method, material compatibility and environmental limits for the exact machine location. -
Which dimension should warehouse staff measure on receipt?
+Verify the 3.3-inch overall case length as well as the 5.0-metre total lead, 5.2 mm tip and 1/4-28 thread against the full order code. -
How can adjacent-probe interference be prevented during commissioning?
+Maintain the documented probe-tip spacing, route cables separately where practical and check for crosstalk or unstable gap voltage with neighboring channels energized.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
330103-00-04-05-02-003300 XL 8 mm Probe, M10 x 1 thread,without armorManufacturer: Bently NevadaView Details -
-
-
-
-
-
-
-
330101-00-24-05-02-003300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
