Honewell FSC

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

Redundant I/O Module

Input Power:
5 VDC, Max. 2.56 A (1 slot)
Output Power:
24 VDC, Max. 2 A (up to 54 slots)
Operating Temperature:
Maximum surrounding operating temperature: 70°C

IVEONET QMR Chassis

Input Voltage: 24 VDC
Output Voltage: 5 VDC
Compliance and Approvals: CE, UL, CSA, TUV, FM

SC SIC CABLE

Model Number: FC-SIC2200
Description: SC SIC Cable with two connectors
Length: 20 meters

Safety Manager SC Hardware

Power Supply: 24 VDC
Input Voltage Range: 0–30 VDC
Output Current: 5 A to 16 A
Operating Temperature: -20°C to +60°C

Safety Universal I/O module

Power supply 24V DC
Rated Current 55mA at 24V
Power dissipation 1.22W at 24V DC with 
20mA loop current & 250 Ohm load
Power Indication Green LED
Power/DCS to Field 1500 VAC
Voltage Input 24V DC
Interface to DCS 4 to 20mA with HART
Transfer accuracy at 200C +/- 20uA

Universal Safety I/O Module

Maximum Safe Voltage (Um) 250V
Uo 25.2 V
Io 110.1 mA
Po 693.6 mW

Analog Output Module

Output Channels 16
Output Ripple < 100 mV peak-to-peak at 
power line frequency, across 250 load
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Output Current Range 0 mA, 2.9 mA to 21.1 mA

Power Distribution Cable

FSPDCIOEP3A
Power Distribution Cable

Power Distribution Cable

FSPDCIOIP1A 
Power Distribution Cable

I/O BUS CPCHAS

Rack-mountable unit
180 VA power consumption
20 kg weight
24 V DC power supply

SM RIO Module

Power Supply:24V DC
Current and Voltage Ratings: 0-10V or 4-20mA
Operating Temperature: -20°C to 60°C
Communication Ports: RS-485, RS-232

Analog Output Module

900B160001
MODULE
PLC MODULE
16 CHANNEL
ANALOG OUTPUT

Safety Manager SC

Safety Certification IEC 61508 
SIL2/3, ISO 13849
Processor High-performance processor 
with fault tolerance
Operating Voltage 24 VDC
Power Consumption <20 W
Operating Temperature -20°C to +70°C
Storage Temperature -40°C to +85°C
Humidity 5% to 95% non-condensing
Mounting Options DIN rail or panel-mounted

SIC cable

System interconnection cables 
connect Safety Manager SC IO modules
to SCA (via an IOTA)
The female 37 position d-sub 
connects to channel 1 thru 16 
(CN1 position) 
or channel 17 thru 32 (CN2 position) of theIOTA 

SC S300 SAFETY CONTROLLER

Safety Standard Compliance 
IEC 61508 SIL3, ISO 13849-1
Operating Voltage 24 VDC
Power Consumption <15 W
Operating Temperature -10°C to +60°C
Storage Temperature -40°C to +85°C
Mounting Options DIN rail or panel mount

SC S300 SAFETY CONTROLLER

Safety Standard Compliance 
IEC 61508 SIL3, ISO 13849-1
Operating Voltage 24 VDC
Power Consumption <15 W
Operating Temperature -10°C to +60°C
Storage Temperature -40°C to +85°C
Mounting Options DIN rail or panel mount

Red Ethernet Cable

Length 30 feet 
Shielding Shielded Twisted Pair (STP) 
Unshielded Twisted Pair (UTP)
Operating Temperature Range -20°C to +75°C
Storage Temperature Range -40°C to +85°C
Bandwidth Up to 1 Gbps (Cat5e) or 10 Gbps (Cat6)
Impedance 100 Ohms ± 15%
Certifications CE, RoHS, TIA/EIA-568 compliant

FTE BRIDGE MODULE

Communication Protocol Ethernet
with fault-tolerant mechanisms
Redundancy Support
Dual redundant communication paths
Input Voltage 24 VDC or 120/240 VAC
Power Consumption Low power, typically under 10 W
Operating Temperature Range  -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity 5% to 95% non-condensing

Sub-D to Knife terminals FTA

37-pole sub-D male connector 
(CN1) that must be connected 
with (16) RUSIO channelsl 16 sets 
of two knife terminals for the sixteen channels
Each channel has a the following knife 
terminal connections:l A+ terminal that is the (RUSIO) 
signal connection.l A- terminal that is 
the common 0 Volt connection.

Tpdgc I/O Circuit Board

TPDG I/O BOARD
INTERFACE FOR PERIPHERALS
6 PERIPHERAL CONNECTIONS  

CIRCUIT BOARD

TDC 3000 systems
Input Voltage: 24 V DC (typical)
Power Consumption: ≤10W
Operating Temperature: -20°C to +70°C
Storage Temperature: -40°C to +85°C

MPU TRANSITION MODULE

TMPU1002
DISCONTINUED BY MANUFACTURER
MPU TRANSITION MODULE
COPPER TRANS MOD FOR EXTREME ENG CPU 18-410051-001 DUAL DIODE MODULE
DIN
6A DUAL DIODE MODULE

Low Level Analog Mux Module

Manufacturer : Honeywell
Product No. : 51309218-125
Product type : Low Level Analog Input Multiplexer RTD FTA
Not CE compliant, not conformally coated
Redundancy not supported
Input channels : 16
Teminals : compression
LLMux RTD FTA with compression terminals
Single IOP interface

Digital Input Power Module

Pulse Input FTA - MC-TPIX52
CE compliant, conformally coated
Use with IOP MU-PPIX02 or MC-PPIX02
Redundancy not supported
Input Points - 8
Terminals - Screw
Size B - 12 inches (307 mm)