Siemens SINAMICS

Frequency Converter Drive Board

PROFIBUS/MPI or PROFINET
Control Voltage: 24 V DC (±15%)
Output Switching Frequency: 1–16 kHz 
Isolation Voltage: ≥2.5 kV AC
Operational Temperature: 0°C to +50°C

Inverter control board

Control Voltage: +24 V DC
Switching Frequency: 5 kHz–15 kHz
Output Pulses: ≥8 PWM
Digital: Start/stop, fault reset
Analog: ±10 V 
Operating Temperature: –10°C to +50°C

Inverter control board

Inverter control board 
IGD9 for devices 510-620 V DC
1300 A
Logic Supply Voltage: +24 V DC (±10%)
DIP Switches:0–10 V, 4–20 mA
Operating Temperature: 0°C to +40°C 
Humidity: ≤95% (non-condensing)

INVERTER DRIVE TRIGGER BOARD

Control Voltage: 24 V DC (±10%)
Isolation Voltage: ≤2.5 kV AC 
Output Frequency: ≤20 kHz
Max Output Current: 3–5 A
Signal Logic: 0–24 V DC control signals
Operating Temperature: –10°C to +55°C
Storage Temperature: –40°C to +85°C
Relative Humidity: ≤93% (non-condensing)

Frequency converter trigger driver board

Logic Circuit: 24 V DC
Isolation Voltage: ≥2.5 kV AC
Output Current: Up to 2–3 A
Frequency Range: 1 kHz–20 kHz
Operating Temperature: 0°C to +60°C
Humidity: ≤95% (non-condensing)

TRIGGER CONTROL BOARD

DRIVER BOARD
TRIGGER CONTROL BOARD
SINAMICS PWB
1080 VDC
810-1025 AMP

OPERATOR PANEL

OPERATOR PANEL
PMU
PARAMETER ASSIGNMENT UNIT
FOR DESIGNS C / D
SIMOVERT MASTERDRIVES

FLAT RIBBON CABLE

FLAT RIBBON CABLE 
POWER INTERFACE 
POWER UNIT A7111-XF1

Normalizing module

Normalizing module 
ABO For devices 
DC 510-620V, 590A

Power supply module

PSU2 Power Board 
Power supply module 
Nominal Voltage: 400 VAC
Input Range: 380 VAC – 480 VAC 
Frequency: 45–65 Hz
Output Voltage: 24 VDC 
Output Current: Typically 10 A
Power Rating: 240 W

Thermal sensor

Thermal sensor
THERMAL DETECTOR
FOR ACQUISITION OF HEAT SINK TEMPERATURE
Operating Range: -25°C to +150°C
Accuracy:±1.5°C 
Response Time:<1 second
Operating Voltage: 24 VDC
Shock/Vibration Resistance: 5–100 Hz

Control Unit

CUA31 Control Unit 
Adapter for PM340/PM240-2 
Power Modules

Normalizing module

Normalizing module 
ABO For devices
3 AC 660-690V and 
DC 890-930V
171A

Inverter control module

SIMOVERT MASTERDRIVES 
Inverter control module 
IGD2 for devices 660-690 V AC 3
50/60 Hz and 890-930 V DC
60 A and 82 A

Normalizing module

Normalizing module 
ABO for devices 660-690 V 
3 AC and 890-930 V DC
82 A
Input Voltage (DC Link): 890–930 V DC
Rated Braking Current: 82 A continuous
Compatible AC Line Voltage Range: 660–690 V
Mains Connection Terminals: 3-phase AC supply

Inverter Board

Siemens MM440 Inverter
Voltage Range: 3-phase 380–480V AC (±10%)
Current Rating:up to 200A
Power Output: 0.37 kW to 250 kW
Switching Frequency: 2–16 kHz
Communication Interfaces: 0–10V, 4–20mA

PLC RELAY BOARD

SSB MODULE
PLC RELAY BOARD
Simovert Master Drives
K80 Option

DRIVE-CLIQ CABLE

SINAMICS DRIVE-CLIQ 
CABLE IP20/IP20 
LENGTH: 1.45 M

Allocation board

allocation board 
with functional safety A5E42928536
Supply Voltage: 24V DC (±15%)
Power Consumption: ≤5W 
Operating Current per Channel: 100 mA 
Isolation Voltage: 500V AC 
Operating Temperature: -20°C to +60°C
Relative Humidity: ≤95%

CompactFlash card

SINAMICS S120 
CompactFlash card 
with firmware option performance expansion 
including licensing (Certificate of License) V4.4

Communication components

A5E00242932
SIMATIC S7-300
PROFIBUS DP/MPI
PROFIBUS D-Sub 9-pin
Up to 12 Mbps for PROFIBUS

AC/DC DRIVE MODULE

AC/DC DRIVE
SIMOVERT MASTERDRIVES
890-930 V DC INPUT
660-690 V AC OUTPUT
3 PH
23 KW
1200 AMP
IP00

INTERFACE BOARD

INTERFACE BOARD
TERMINAL BLOCK SE300
FOR TECHNOLOGY MODULE T300
SIMOVERT MASTERDRIVES

Trigger Driver Board

PC BOARD
SINAMICS PM240
Trigger Driver Board 

TRIGGER BOARD

260A TRIGGER BOARD 
DRIVER BOARD
480 V / 650 VDC / 260 A

Double Motor Module

SINAMICS S120 
Double Motor Module
input: 600 V DC 
output: 400V 3AC, 18 A/18 A 
design: booksize D type 
internal air cooling optimized pulse patterns 
and support of the extended Safety Integrated 
functions incl. DRIVE-CLiQ cable

Inverter driver board

SINAMICS S120/S150
Logic-side (control): 24 V DC
Power-side (IGBT control):up to 800 V DC peak
Signal Isolation: ≥2500 V AC
Operating: 0°C to +55°C
Storage: -40°C to +85°C

BRAKING RESISTOR

BRAKING RESISTOR
SINAMICS
160 OHM
4 KW
460 V
FOR POWER MODULE
FSB BASE MOUNTING POSSIBLE

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3-PH 400V, 9A 
FRAME SIZE: BOOKSIZE D-TYPE 
INTERNAL AIR COOLING OPTIMIZED PULSE 
SAMPLE AND SUPPORT OF THE EXTENDED 
SAFETY INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

SINGLE MOTOR MODULE

SINAMICS S120 
SINGLE MOTOR MODULE 
INPUT: DC 600V 
OUTPUT: 3AC 400V, 
30A FRAME SIZE: BOOKSIZE C-TYPE 
INTERNAL AIR COOLING OPTIMIZED 
PULSE SAMPLE AND SUPPORT OF
THE EXTENDED SAFETY INTEGRATED FUNCTIONS 
INCL. DRIVE-CLIQ CABLE

INVERTER CUVP BOARD

INVERTER CUVP BOARD
Logic Supply Voltage:24V DC ±10%
Multi-core DSP/Vector processor 
Temperature Range:0°C to +55°C 
EnDAT 2.2, Hiperface DSL¹, TTL/HTL²
SINAMICS S120 FW ≥ V4.8

Control Module

SINAMICS S 
spare part 
Pre-charging resistor 4R0
Resistance Value: 4Ω (4.0 Ohms)
Resistance:Ω (4.0 Ohms) ±10% tolerance
Power Rating:500 W to 1500 W 

Control Board

Input Power: 24V DC
Sensor Interfaces: Analog I/O (0-10V/4-20mA) 
ARM/X86-based chipsets
Temperature Range: -20°C to +60°C
Humidity Tolerance: ≤95% (non-condensing)

POWER SUPPLY UNIT

POWER SUPPLY UNIT
CIM PM-IF
SINAMICS spare part 
CIM PM-IF for Power Module 
PM 240 FSGX CIB,
power supply board and mounting plate

Capacitor board

SINAMICS S120 
Adapter cable 4-pole 
for connection of the connector X41 
for replacement of the CIB module 
with a Control Interface Module (CIM) 
is only required for air-cooled Power Modules

LINE REACTOR

SINAMICS LINE REACTOR 
FOR 10 KW SMART LINE MODULE 
INPUT: 3-PH 380-480 V
50/60 HZ

Power Block Drive Board

Power Block Drive Board
DC Link Voltage: 510–720 V DC
AC Output Voltage:400 V AC
Continuous Output: Up to 100–280 A (rms)
Cooling Method: Liquid or forced-air cooling
Thermal Resistance: < 0.05 K/W

TM120 TERMINAL MODULE

SINAMICS TERMINAL MODULE 
CABINET TM120 
WITHOUT DRIVE-CLIQ CABLE ADD ON BOARD 
FOR SINAMICS CONVERTERS 
PTC and KTY analog inputs 
with safe electrical isolation

OUTPUT POWER UNIT

OUTPUT POWER UNIT
PEU ASSEMBLY
17.5 A
380-460 V AC
50/60 HZ

Single Motor Module

SINAMICS S120 
Single Motor Module 
input: 600 V DC 
output: 400 V 3 AC, 
9 A type of construction: booksize 
internal air cooling optimized pulse patterns 
and support of the extended Safety 
Integrated functions incl. DRIVE-CLiQ cable

BRAKING MODULE

SINAMICS BRAKING MODULE 
INPUT: 1035 V DC 
OUTPUT: 250 KW/15 S 
FOR CHASSIS UNITS 
HX AND JX

PC Adapter

SIMATIC S7
PC ADAPTER V5.1 
FOR CONNECTION OF S7-300/400
C7, M7; FOR CONVERSION OF RS232 TO RS485
W/O RS232 CABLE

INVERTER CONTROL MODULE

INVERTER CONTROL MODULE
MODEL IGD8
860 AMP
510-620 VDC

INTERFACE ADAPTER

INTERFACE ADAPTER
DOUBLE PTP1
PEER TO PEER
FOR 12 PULSE OPERATION
SIMOVERT MASTERDRIVES

MOTION CONTROL BOARD

CLOSED-LOOP AND CONTROL MODULE
MOTION CONTROL BOARD
CUMC
60 MHZ
SIMOVERT MASTERDRIVES

Control Interface Board

SINAMICS S 
replacement Control Interface Board 
for 380-480V 3AC
50/60 Hz
820A basic line module

IPI Parallel Switch Module

Parallel switch module IPI
Input Voltage:three-phase systems
Rated Voltage:380–480V AC (±10% tolerance)
Switching Capability: 5–6 inverters

SINAMICS S120 Smart Line Module

SINAMICS S120 
Smart Line Module 
380-480V 3AC, 50/60 Hz 
Output: 510-650 V DC, 550 A 
Rated power: 250kW 
Built-in unit IP00 Internal air cooling
Drive-CLiQ cable

Rectifier interfaces Module

Rectifier interfaces Module 
PER2 for infeed
regenerative feedback Supply units 
with Designs H and K 
380-480 V 3 AC, 50/60 Hz

INVERTER TRIGGERING MODULE

INVERTER TRIGGERING MODULE
IGD1 FOR UNITS
3-PHASE
380-460VAC
50/60 HZ
A. 510-620VDC
186 AMP