3500 System

Hydro Monitor

Powerconsumption 7.7 watts, typical
Multimodepositive inputI/O 50 kΩ
Direct filter0.104 Hz to 500 Hz
Rotor speed is 25 to 1,500 cpm.
Gap filter -3 dB at 0.05 Hz
Direct filter -3dB at 1.2 Hz

High Voltage DC PIM

High Voltage DC PIM
1.9/7.5 AMP
95-125 VAC
190-250 VAC
47/63 HZ

Temperature Monitor

Accepts from 1 to 6 RTD or TC transducersignals
Greater than 3 MΩ for each lead input.
TC Option: Nominal consumption of 6.3watts.
RTD Option: Nominal consumption of 5.6watts

Temperature Module

Model: 3500/61
Part Number: 133811-02.
Description: 16-Channel Temperature Monitor Module
RTDs:2-wire, 3-wire, or 4-wire Pt100
RTD Excitation Current: 1 mA
ADC Resolution: 16-bit
Accuracy RTD: ±0.5°C (±0.9°F) typical
Programmable Alarms: Up to 4 per channel 

I/OModule

TRANSIENT DATA INTERFACE MODULE
3500
100Base-FX (Fiber Optic) 
I/OModule

VGA Display Unit

Powerconsumption:4.6 watts max
High-speednetwork:Monitor status, data andvalues
RS232 port:Touch controller data
Front Port:24 Vdc Power
Power +24Vdc ± 6%:4.7 watts max 
Input range :22.5 to 25.5 Vdc input 
VGA inputs:Video image
RS232 inputs:Touch screen control data 

Aero GT Vibration I/O Module

12659901
VIBR I/O MODULE
Aero GT I/O Module Internal Terminations

Proximitor ET BlockEuro Style Connectors

125808-01 Proximitor ET BlockEuro Style Connectors
Signal :Accepts from 1 to 4 proximitytransducer signals
Power consumption :7.7 Watts, typical
Standard I/O: 10 kΩ
Output Impedance:550 Ω
Transducer Power Supply:-24 Vdc
Gap filter:-3 dB at 0.09 Hz
Smax : 0.125 to 15.8 times runningspeed

I/O Module

INTERNAL BARRIER
I/O MODULE
3500 SERIES
4 PROX/ACCEL CHANNELS
W/ INTERNAL TERMINATIONS

RACK

01 19-inch Rack (14 module slots)
01 Panel Mount Option, Full-Size Rack
01 CSA/NRTL/C (Class 1, Division 2) 
00 None
01 CE

Universal AC Power SupplyModule

350015
DISCONTINUED BY MANUFACTURER
POWER SUPPLY MODULE
1.9/7.5 AMP
95-125 VAC
190-250 VAC
47/63 HZ

Prox/Velom I/O Module

14048201
I/O MODULE
Prox/Velom I/O Module
with External Terminations

Enhanced Keyphasor Module

3.2 Watts typical
21.8 kΩ minimum
Specified at +25°C (+77°F).
Proximity: -2V to -18V 
MPU: 5 mV to 50 V peak 
Range: 1 RPM to 99,999 RPM
Accuracy: ±0.1% of reading

OVERSPEED DETECTION SYSTEM

OVERSPEED DETECTION SYSTEM
FOR THE 3500 SERIES MACHINERY DETECTION SYSTEM
ELECTRONIC
INPUT IMPEDANCE: 20 K
8.0 WATTS
OUTPUT IMPEDANCE: 550
24VDC
40MA MAX.

Tachometer Module

350050M
TACHOMETER MODULE
5.8 WATT
3 LED
550 OHM
2 INPUT

TMR I/O Module

126632-01 
TMR I/O Module
3500/42M 
Proximity Monitor 

I/O MODULE

I/O MODULE
COMMUNICATION GATEWAY MODULE
Modbus RS232/RS422 I/OModule

Isolated Tip TC I/O Module

3500/65 RTD/ Isolated Tip TC I/OModule
External Terminations
Channel-to-Channel:1500V AC
Analog Output:4-20mA
Supply Voltage: 24V DC ±10%
Resolution:0.1°C
Input Impedance:>1MΩ

Modbus RS485 I/O Module

Ethernet TCP/IP Capabilities
Serial (RS232/RS422/RS485) 
Communications Capabilities
RJ45 Ethernet Connection
Configurable Modbus Register Utility

AC POWER INPUT MODULE

106M108101
AC POWER INPUT MODULE
85-264 VAC
2.8 AMP
47-63 HZ

I/O MODULE

12824001
I/O MODULE
PROXIMITOR /SEISMIC MONITOR
Prox/Seismic I/OModule 
with externalterminations

Power Supply Module

Product No. : 3500/15-05-05-00
Product type : 3500/15 AC and DC Power Supplies
Model : 3500/15 = Power supply
Power supply type : 05 = Universal AC voltage (85 to 264 Vac rms)
Power supply type : 05 = Universal AC voltage (85 to 264 Vac rms)
Agency approval option : 00 = None

Transient Data Interface

Channels Supported: Up to 16 channels
Sampling Rate:Up to 100 kHz
Adjustable resolution:12-bit to 16-bit ADC
Power Supply: 24 VDC
Standards: API 670

Tachometer Module

InputImpedance:20 k Ω (standard)
MPU: 1 VAC to 50 VAC
Proximity Probe: -2 VDC to -18 VDC
Range: 0.1 RPM to 99,999 RPM
Accuracy: ±0.1% of reading
Power Supply: 15–30 VDC

Vibration Monitor

Radial Vibration
Thrust Position
Differential Expansion
Shaft Absolute
Eccentricity
Acceleration
Velocity