ALL MANUFACTURERS

Current Output Module

8 channels, module isolation 
1.25 to 23 mA
4 to 20 mA
230 to 600 Ω
±16 µA/10 ºC
1.5 kV AC between output signal and system for 1 minute
5 V system: 320 mA24 V system: 300 mA

Digital Input Module

16-channel, module isolation
6 mA ± 20 % 
24 V DC +20 % / -10 % (*4), 10 mA or greater
24 V DC +20 % / -10 % (*3) (*4)Current capacity: 200 mA
30.0 V DC
40 ms maximum
2 kV AC between input signal and system for 1 minute, 16-input line collectivelyconnected

Digital Input Module

16-channel, module isolation
6 mA ± 20 % 
24 V DC +20 % / -10 % 
10 mA or greater
24 V DC +20 % / -10 %
Current capacity: 200 mA
30.0 V DC
40 ms maximum
2 kV AC between input signal and system for 1 minute
16-input line collectivelyconnected

Digital Input Module

16-channel, module isolation
24 V DC
1 V maximum
24 V DC, 3.4 A minimum
24 V DC + 20 % / -10 % 
1.6 mA
0.2 A/output line (3.2 A in total output line) (*3) (*5)
120 to 685 Ω (*6
2 kV AC between output signal lines and system for 1 minute, 16-point input linescollectively connected (negative lines)

Digital Input Module

16-channel module isolation 
6 mA ± 20 %
24 V DC +20 % / -10 % 
Current capacity: 200 mA
24 V DC +20 % / -10 %
10 mA or greater
30.0 V DC
40 ms maximum
2 kV AC between input signal and system for 1 minute 
16-input line collectivelyconnected
290 mA maximum (5 V DC)140 mA 
maximum (24 V DC)

processor module

Voltage, Current, Thermocouple
Input Range: 
Voltage: ±100mV to ±10V, Current: 4-20mA
Output Range: 
Voltage: 0-10V, Current: 4-20mA
Accuracy: ±0.1% of full scale
Response Time: ≤ 250 ms
Power Supply: 24V DC
Isolation Voltage: 1500V AC
Operating Temperature: -10°C to +55°C

processor module

Voltage Current
Thermocouple
Voltage: ±100mV to ±10V, Current: 4-20mA
Output Range
Voltage: 0-10V, Current: 4-20mA
Accuracy: ±0.1% of full scale
Response Time: ≤ 250 ms
Power Supply: 24V DC
Isolation Voltage: 1500V AC
Operating Temperature: -10°C to +55°C

Pulse Input Module

8, isolated channels 
0 to 10 kHz
500 V AC, for 1 minute
500 V AC, for 1 minute 
40 µs
68 kΩ (12 V DC or 24 V DC)
300 mA (5 V DC), 
400 mA (24 V DC)

ESB Bus Node Units

ESB Bus Node Units 
100-120 VAC INPUT
50/60 HZ
220 VAC
12 SLOT

ESB Bus Interface Slave Module

4 to 20 mA
16, isolated, standard switch-overresponse in redundant configuration
Between output and system: 1500 V AC, for 1 minute 
0 to 750 Ω 
Less than 0.65 mA
±48 µA 
±16 µA/10 ˚C
230 mA (5 V DC), 540 mA (24 V DC) 

Power Supply Module

Power Supply Module
Two modules in case of 
dual-redundant configuration.
Power supply to the I/O modules
and supply power to the transmitters

FIELD CONTROLLER UNIT

FIELD CONTROLLER UNIT
100-120 VAC
50/60 HZ
200 VA

ESB Bus Node Unit

ESB Bus Node Unit 
100-120 VAC INPUT
50/60 HZ
220 VAC
12 SLOT

ANALOG INPUT MODULE

ANALOG INPUT MODULE
4 TO 20 MA
16 CHANNEL
ISOLATED

BUS INTERFACE MASTER MODULE

16-Pointor8-Poin
KS Cable Interface Adapter 
for Analog 16-channel
with ISA Standard G3 option
Connecting with AEA4D 
Connectingwith MUB,TE16 

Digital output card

Operating Voltage: 24V DC
Maximum Output Current: 0.5A to 1A
Response Time: Typically 1ms to 10ms
Operating Temperature: 0°C to 60°C
Storage Temperature: -20°C to 70°C

Proximity Probe Housing Assemblies

Threaded ports for conduit connections
A probe sleeve of optional lengthl O-rings
A reverse mount proximity probe
A thread seall Optional conduit fittings
An optional standoff adapter

Eddy Current Sensor

2 V/mm ≤ ±1.5% max
Approx. 5.5 mm 
±4.0 mm 
2,500 m/s 
-35 to 175°C 
200°C 
-0.3%/100°K Zero Point

MAIN PROCESSOR MODULE

MAIN PROCESSOR MODULE
ENHANCED EMP II
24 VDC
LED INDICATORS

ANALOG INPUT MODULE

INPUT MODULE
ANALOG
SIMATIC S5
FOR S5-90U/-95U/-100U
ET 100U
ET 200U
4 INPUTS
0-10 V

DCS Module

24V DC
16 or 32 channels
RS-232, RS-48
5 for serial communication
Typically 0°C to 60°C
DIN rail mounting or panel-mount 

CPU module

8MB DRAM / 512kB SRAM
8MB file-flash
1x Eth100
1x RS232
1x RS232/422/485
Integrated power supply 17W
PCC slot
Cold Climate

ECT SIGNAL ISOLATER

ECT420MA2X420MA24DCTXDIN
ECT SIGNAL ISOLATER
CONVERTER
SPLITTER
INPUT
4 - 20MA
OUTPUT
2X4 - 20MA
24 VDC
4 WIRE
DIN RAIL MOUNTING
SCREW TERMINALS

pulse width modulation module

2 pulse-width modulated output channels
2 shielded DSub connectors 
for output channels
LED (green) per output
Choice of high-power or TTL output level
Monitoring of the load current
Monitoring of the external supply voltage 
Monitoring of the internal temperature

Analog In/Output Module

2 input channels 
for incremental and SSI encoders
Full 32 bit counter
2 analog outputs (14 bit)
4 fast digital input channels for initiator and trigger
Position measurement / position storage can be initiated via triggers
Virtual for use in applications:
zero pulse, speed, etc.
Synchronization via SYNC/PreSYNC