
Coupler Module
Application:Interfacing a computer
Transmission:Serial acc. to RS 232c
Transmission rate:300 - 19200 baud
Transmission distance, max.:20 m
Industrial Control Board
Processor:Dual-core PowerPC @ 800MHz
Memory:64MB Flash, 32MB RAM
Control Loops:Up to 128 PID loops
Ethernet: 2x 10/100BASE-T
Serial: 1x RS-485
Fieldbus: PROFIBUS DP
Digital Input:24V DC
Digital Output:Relay, 2A @ 30V DC
Analog Input:4-20mA/0-10V
Coupling Module
Power Supply:24V DC ±10%
Power Consumption:5W
Isolation:1500V AC
PROFIBUS Connector:9-pin D-sub
Protocol:PROFIBUS DP
Address Range:0-125
I/O Capacity:244 bytes input
Response Time:<1ms
Analog Input Module
Power Supply:24V DC ±10%
Power Consumption:6W (max)
Isolation:1000V AC
Range:4-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Input Impedance:250Ω
Update Rate:10ms/channel
Analog Input Module
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Current:0-20mA/4-20mA
Voltage:0-10V/±10V
RTD:Pt100/Pt1000
Sampling Rate:50Hz/channel
Common Mode Rejection:>120dB @ 50/60Hz
Normal Mode Rejection:>60dB
Input Impedance:250Ω (current)
Joystick assy
Operating Voltage:Typically 24V DC
Analog:0-10V
Digital :CANbus/DeviceNet
Current Consumption:<100mA
Degrees of Freedom:2 or 3 axes
Handle Material:Industrial-grade plastic/metal
Mechanical Life:>1 million cycles
Operating Force:3-10N
Coupling Module
Power Supply:24V DC ±10%
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol:PROFIBUS DP
Data Rates:9.6kbps - 12Mbps
Address Range:0-125
Response Time:<1ms
Digital Output Module
Power Supply:24V DC ±10%
Power Consumption:4W (typical)
Isolation:500V AC (channel-to-channel)
Backplane Current:100mA (max)
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Digital Output Module
Power Supply:24V DC ±10%
Power Consumption:5W (max)
Isolation:500V AC
Backplane Current:120mA (max)
Output Type:Solid-state
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Leakage Current:<1mA
Binary Input Module
Power Supply:24V DC ±10%
Power Consumption:3W (typical)
Backplane Current:80mA (max)
Update Rate:10ms
Input Type:Sink/Source (configurable)
Input Voltage:12-60V DC
Threshold Voltage:8V DC (ON), 5V DC (OFF)
Input Current :3mA @ 24V DC
Response Time:<1ms
Isolation :1500V AC
Station bus coupling module
Power Supply:24V DC ±20%
Power Consumption:15W (typical)
Isolation:1500V AC
Data Rates:10/100 Mbps
Latency: <100μs
I/O Capacity:Up to 1024 signals
Universal Control Module
Memory:128MB Flash
Control Loops:Up to 64 PID loops
Scan Time:<1ms
Analog Input:4-20mA/0-10V
Digital Input:24V DC, 3mA
Analog Input Module
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Sampling Rate:50Hz/channel
CMRR:>120dB @ 50/60Hz
NMRR:>60dB
Input Impedance:250Ω
POWER SUPPLY MODULE
1606XLE120E
POWER SUPPLY
1606-XLE SERIES
ESSENTIAL POWER
INPUT VOLTAGE - 100-240 V AC
RATED OUTPUT - 120 W
24-28 V DC OUTPUT
Industrial Control Panel
Input Voltage:400-480V AC 3-phase (50/60Hz)
Control Voltage:24V DC ±10%
Main Circuit Breaker:80A (adjustable)
Short Circuit Rating:65kA @ 480V AC
Power Consumption:≤500W
POINT I/O Very High Speed Counter Module
Series:POINT I/O
Module Type:Very High Speed Counter Module
Input Voltage:24 Volts DC
No. of Inputs:1 – 1 group of A/Aret
B/Bret and Z/Zret
Output Voltage Range:10…28.8V DC
Key Switch Position:2
Power Dissipation:1.9 Watts
Thermal Dissipation:6.5 BTU/hour
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.