AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330171-00-12-05-01-05
In Stock
Ships by Thursday, September 3
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330171-00-12-05-01-05
-
Product Model330171-00-12-05-01-05
-
Spare Model330171-00-12-05-01-05
-
Product Parameters5 mm Proximity Probe
-
Tariff Code90318090
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size0.52x3.05x50cm
-
ManufacturerBently Nevada
-
Weight0.32 kg
-
Unthreaded Length Option0.0 in (0 mm)
-
Overall Case Length Option1.2 in (30.5 mm)
-
Total Length Option0.5 m (1.6 ft)
-
Connector OptionMiniature coaxial ClickLoc connector with connector protector, standard cable
-
Agency Approval OptionMultiple Approvals
-
Probe Thread1/4-28 UNF-2A
-
Armor ConfigurationWithout armor
-
Probe Tip Diameter5.2 mm (0.21 in)
-
Recommended Gap1.27 mm (50 mils)
-
Linear Range0.25 to 2.3 mm (10 to 90 mils)
Description
Bently Nevada 330171-00-12-05-01-05 is a 3300 5 mm non-armored proximity probe with a 1/4-28 UNF thread, 1.2-inch overall case length and 0.5-metre total length.
The probe is used with a compatible 3300 5 mm Proximitor Sensor and extension cable for shaft-vibration, axial-position, Keyphasor and speed measurements. Verify the complete order code, mounting, cable length, connector and approval option before replacement.
The probe is used with a compatible 3300 5 mm Proximitor Sensor and extension cable for shaft-vibration, axial-position, Keyphasor and speed measurements. Verify the complete order code, mounting, cable length, connector and approval option before replacement.
Information
Overview
Manuals
Product Applications
Compatibility
Lifecycle & Replacement
Features:
- 3300 5 mm probe with 1/4-28 UNF thread and no armor
- 0.0-inch unthreaded length
- 1.2-inch overall case length
- 0.5-metre total probe length
- ClickLoc connector with protector and Multiple Approvals
The probe supports shaft-vibration, axial-position, Keyphasor and speed measurement through a compatible 3300 5 mm Proximitor Sensor system. Verify the complete probe, cable, connector, mounting, target material and approval configuration before commissioning.
330171-00-12-05-01-05 Bently Nevada: Verify the exact order code, probe geometry, cable length, connector, compatible 3300 5 mm system and controlled Bently Nevada documentation before installation or replacement.
Bently Nevada 330171-00-12-05-01-05 3300 5 mm Proximity Probe Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
- Relative shaft-vibration measurement in restricted probe-mounting spaces
- Axial shaft-position measurement at thrust-bearing locations
- Keyphasor phase-reference measurement for machinery diagnostics
- Tachometer speed measurement on conductive shaft targets
- Overspeed measurement with an approved 3300 5 mm transducer system
Use 330171-00-12-05-01-05 only within a compatible Bently Nevada 3300 5 mm transducer system.
Match the complete 330171 order code, not only the 330171 family number.
Confirm the 0.5-metre probe cable and extension cable produce the approved system length.
Verify the 1/4-28 mounting thread, 1.2-inch case length and required probe-tip reach.
Check the ClickLoc connector, target material, gap range and hazardous-area approval.
Do not substitute an 8 mm XL probe or a five-metre 330171 probe without controlled system verification.
Match the complete 330171 order code, not only the 330171 family number.
Confirm the 0.5-metre probe cable and extension cable produce the approved system length.
Verify the 1/4-28 mounting thread, 1.2-inch case length and required probe-tip reach.
Check the ClickLoc connector, target material, gap range and hazardous-area approval.
Do not substitute an 8 mm XL probe or a five-metre 330171 probe without controlled system verification.
Record the complete 330171-00-12-05-01-05 order code before removing the installed probe.
Inspect the probe tip, mounting threads, cable jacket, ClickLoc connector and protector.
Preserve the approved extension-cable and Proximitor Sensor combination.
Confirm the replacement probe case length and mechanical reach before installation.
Set and document the final static gap and channel response after mounting.
Contact Amikon with the complete order code for availability and replacement support.
Inspect the probe tip, mounting threads, cable jacket, ClickLoc connector and protector.
Preserve the approved extension-cable and Proximitor Sensor combination.
Confirm the replacement probe case length and mechanical reach before installation.
Set and document the final static gap and channel response after mounting.
Contact Amikon with the complete order code for availability and replacement support.
Alternative Names
330171-00-12-05-01-05
330171 3300 5 mm Probe
0.5 m 1/4-28 Non-Armored Proximity Probe
Technical notes
Verify the complete 330171-00-12-05-01-05 identification before replacement. Confirm the 0.0-inch unthreaded length, 1.2-inch overall case length, 0.5-metre total length, 1/4-28 UNF mounting thread, ClickLoc connector, required extension cable, compatible 3300 5 mm Proximitor Sensor, target material and final probe gap before commissioning.
FAQs
-
How is the required system length calculated for this 0.5 m probe?
+Add the 0.5 m probe cable to the selected 3300 5 mm extension-cable length. The probe, extension cable and Proximitor Sensor must form an approved total system length before commissioning. -
What does 00-12-05-01-05 identify in this configuration?
+It identifies 0.0-inch unthreaded length, 1.2-inch overall case length, 0.5-metre total length, a ClickLoc connector with protector and the Multiple Approvals option. -
Is the 1.2-inch case suitable for the existing mounting bracket?
+Confirm available thread engagement, locknut position and probe-tip reach against the installed bracket or probe housing. Do not approve the fit from the 1/4-28 thread alone. -
How should the ClickLoc connector protector be handled during installation?
+Keep the protector installed until the connection is ready, inspect both mating surfaces, connect without twisting the cable and refit protection where required by the installation procedure. -
Which approval documents should MRO procurement request?
+Request the current manufacturer declaration and certification applicable to option 05. Confirm the site hazardous-area requirement against the delivered nameplate and paperwork. -
What target and initial gap should the engineer verify?
+Use the same target material assumed by the calibrated transducer system and set the initial gap near the documented 1.27 mm recommended value while checking the Proximitor output. -
What should be inspected when this short-cable probe arrives?
+Check the full order code, probe tip, 1/4-28 threads, 1.2-inch case, 0.5-metre cable, ClickLoc connector, protector and approval identification before accepting the item. -
Which tests are required before the channel returns to service?
+Verify mechanical mounting, static gap voltage, signal polarity, cable continuity, vibration response, alarm behavior and channel stability under the controlled machinery-monitoring procedure.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
-
-
-
-
-
330101-00-28-90-02-003300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
