Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz
Power Supply: Typically 24 V DC
Input Voltage Range: typically 0-10V DC
Operating Temperature Range:
Typically -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range:
Typically -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
Frequency (f):47.5 ... 63 Hz
Frame Size:R3
Input Voltage (Uin):380 … 480 V
Mounting Type:Wall-mounted_NO UNIT$
Output Current, Normal Use (In):45 A
Output Current, Heavy-Duty Use (IHD):38 A
Output Power, Normal Use (Pn):22 kW
Output Power, Heavy-Duty Use (PHD):18.5 kW
Setting Range:28 ... 40 A
Rated Operational Current:40 A
Rated Insulation Voltage:690 V
Electrical Durability:25000 cycle
Ampere Rating UL/CSA:40 A
Rated Operational Power AC-3 (Pe) :hree Phase 18.5 kW
Maximum Operating Voltage UL/CSA Main Circuit:600 V AC
Voltage: 24V DC
Consumption: 3.5W typical
Isolation: 1.5kV AC
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
Node Capacity: Up to 124 devices
IEC 60870-5-101/104
Power Supply:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1.5kV AC
Data Transfer Rate:Up to 12Mbps
Fieldbus Protocols:PROFIBUS DP
DRIVE-CLiQ:For direct drive connection
Processor: 32-bit dual-core ARM Cortex
Clock Speed: 800MHz
Memory: 512MB Flash
Power Supply:24V DC (±15%)
Power Consumption:8W (typical)
Isolation Voltage:2.5kV AC
I/O Capacity:16 DI/8 DO
330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 2.5 in
50 5.0 meters (16.4 feet)
11Miniature coaxial ClickLocconnector
with connectorprotector, FluidLoc cable
00 Not required
Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA
Input Isolation:2.5kV AC
Backplane Bus:Proprietary high-speed bus
Protocol Support:Modbus RTU, PROFIBUS DP
Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Processor:32-bit ARM Cortex-M7 @ 400MHz
Memory:64MB Flash, 32MB RAM
Cycle Time:≤100μs
Digital I/O:24V DC
Analog Inputs:0-10V/4-20mA
Output Type:Analogue Relay
Supply Voltage:100 → 240 V ac
Number of Outputs:3
Control Type:ON/OFF
Communication Module Available:Yes
Display Type:LCD, Multi Line, TFT
IP Rating:IP66
Range:ControlMaster CM30
Additional Functionality:ON/OFF
Series:CM30
Panel Depth:121mm
Display Colour:Green, Red, Yellow
Voltage: 3-phase 200-480V AC (±10%)
Frequency: 50/60Hz (±5%)
Power Range: 2.3kW to 7.5kW
Output Current: 6A to 18A RMS
Control Method: Field-Oriented Control
Control Bandwidth: 1.5kHz
Speed Range: 0-6000 RPM
Positioning Accuracy: ±1 encoder count
Collector-Emitter Voltage: 1200 V or 1700 V
Gate-Emitter Voltage:±20 V (max)
Continuous Collector Current: 25–50 A
Peak Collector Current: 75–100 A
Turn-On Time:50–100 ns
Turn-Off Time:150–300 ns
Operating Temperature: -40°C to +125°C
Storage Temperature: -40°C to +150°C
Collector-Emitter Voltage (Vces): 1700V
Gate-Emitter Voltage (Vges): ±20V
Turn-on Time (ton): 0.5μs (typical)
Turn-off Time (toff): 1.2μs (typical)
Switching Frequency: Up to 20kHz
Power Dissipation: 1800W (max)
DC Link Voltage: 1000-1200V DC
Typical Applications:400-690V AC drives
Processor:32-bit ARM
Base Memory:512MB DDR4 RAM
Expanded Memory:2GB Flash
Execution Speed:0.05ms/1k instructions
I/O Scan Time:≤1ms (for 1000 I/O points)
Task Capacity:32 concurrent tasks
Digital I/O:Up to 2048 points
Analog I/O:Up to 512 channels
Input Voltage:24V DC (±15%) or 100-240V AC
Power Consumption:15W (typical)
PROFIBUS DP:9-pin D-sub, 12Mbps max
Modbus RTU:RS485 (terminal block)
Power Supply:24V DC (±10%), sourced from drive
Power Consumption:3W (typical)
Isolation :1.5kV AC (fieldbus to drive)
Signal Levels:RS485: ±15V differential
DIRECT CURRENT FEEDBACK BOARD
EX2100 SERIES
Board Description:Exciter DC Feedback
Board Type:Input/Output Terminal Board
External Power Supply:±24 VDC
Functional Acronym/Abbreviation:EDCF
Hardware Form:A, Not Backward Compatible
Series: EX2100
Product Type: Exciter Gate Pulse Amplifier Board
Operating System: QNX
Power Requirements: +5 V dc, 6 A
Number of input channels: 24
Trip Solenoid Rating: 125 V dc
Power supply voltage: 28 V dc
Series: Mark VI
Product Type: Input Board
Function: Converts the Inputs to
Digital Temperature Values
Number of Channels: 16 channels per VRTD board
A/D Converter Resolution: 14-bit resolution
Power consumption: Less than 12 W
Operating Voltage:24V DC (±10%)
Power Consumption:2.5W (typical)
Number of Channels:4
Output Type:0-20mA
Resolution:16-bit
Load Impedance:≤600Ω
Isolation:1.5kV AC
Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:4kV AC
Gate Drive Output:±15V (IGBT control)
Switching Frequency:Up to 2kHz
Supported IGBTs:1700V/3300V modules
Desat Protection:<2μs response time
Short-Circuit Protection:≤10μs trip time
Power Supply:24V DC
Power Consumption:5W max
Isolation:1.5kV AC
Screen Type:TFT LCD with LED backlight
Resolution:320 × 240 pixels (QVGA)
Color Depth:65k colors
Mark VIeS Safety Discrete Output I/O pack
Country of Manufacture: United States of America (USA)
Number of buffered outputs: 14
N28 ripple: 280 mV pk
N28 maximum current: 400 mA
Temperature rating: 0 to 60 oC
Product Type: Discrete Output Pack
Power Supply:24V DC (±10%)
Surge Protection 4kV
Input Channels:24V DC
Isolation:1.5kV channel-to-channel
Output Channels:4-20mA
Update Rate:10ms per channel
Backplane Interface:800xA CI867 bus
Protocol Support:Modbus RTU/TCP