Supply Voltage:90-264VAC, 47-63Hz or 18-36VDC
Power Consumption:15W typical
Isolation:1500VAC input-to-output
Input Types:4-20mA
Accuracy:±0.1% of full scale
Resolution:16-bit (0.0015% of span)
Sampling Rate:10 samples/second per channel
Analog Inputs:2 isolated channels, 24-bit ADC
Model:PM590-ETH
Order Code:1SAP150000R0270
Type:Compact PLC Processor with Integrated Ethernet
Series:AC500-eCo
Power Supply:24 V DC (±20%)
Consumption: 6 W (typical)
CPU:32-bit RISC Processor
Isolation:1500 V AC
330102-00-50-10-01-05
DISCONTINUED BY MANUFACTURER
PROXIMITY PROBE
3300 XL 8 MM
5.0 INCH OVERALL CASE LENGTH
1.0 M (3.3 FT) TOTAL LENGTH
3/8-24 UNF THREAD
WITH ARMOR
3300 XL 8 mm Probe
3/8-24 UNFthread
with armor
Order in increments of 0.1 in.
Standard thread configurations:
Maximum case length: 9.6 in.
Minimum case length: 0.8 in.
Example: 2 4 = 2.4 in.
20 2.0 meters (6.6 feet)
01Miniature coaxial ClickLocconnector
with connectorprotector, standard cable
05 CSA, ATEX, IECEx Approvals
Supply Voltage: 24V DC (±10%)
Power Consumption: <15W (typical)
Input Channels:2 independent channels
Signal Range:±10V (IEPE), 4–20mA (Velocity)
Sampling Rate:Up to 100 kHz per channel
Frequency Response:0.5 Hz – 20 kHz (±3dB)
Dynamic Range:100 dB (typical)
ADC Resolution:24-bit
Analog Output:4–20mA
Safety Standard Compliance
IEC 61508 SIL3, ISO 13849-1
and other industrial safety standards
Communication Protocols
Modbus TCP, Profibus, EtherCAT,
CANopen, and other protocols
Operating Voltage 24 VDC
Power Consumption Typically <20 W
Operating Temperature Range -10°C to +60°C
Storage Temperature Range -40°C to +85°C
Product No. : 51153818-202
Product Type : Node Address Jumper
The node address jumper is used to give the processors in
the RUSIO-3224 or RUSLS-3224 module(s)
the node address of the IOTA
Gray plastic jumper set
Has a (two digit) number that is clearly visible
Type of Jumper
Electrical jumper connections
for various industrial applications
Operating Temperature Range
Typically from -20°C to +70°C
Storage Temperature Range -40°C to +85°C
Humidity 5% to 95% non-condensing
Bus Protocol:CEX-Bus
Data Rate:10 Mbps
Fiber Type:62.5/125 μm multimode
Redundancy:Dual-path redundancy
Node Capacity:Up to 32 nodes
Power Supply:24 V DC (±10%)
Power Consumption;≤ 5 W
Isolation:2500 V AC
Type:Thyristor-Based Soft Starter
Rated Current:142 A
Motor Power (400V):75 kW
Input: 208–690V AC (±10%), 50/60 Hz
Control Circuit: 100–250V AC/DC
Current Limit: Adjustable (200–500% I<sub>e</sub>)
Pump Stop: Anti-water-hammer control
PERFECT HARMONY power cell
G4E Cell 315A, 750 V
H-Bridge Operation: 750 V DC link
Rated Current: 315 A
Surge: Short-term 150%
Thermal Output: ≤2.5 kW
DC link voltage:±750 V
Electronics: 0°C to +55°C (−10°C to +85°C storage)
Auxiliary Power: 24 V DC (±15%)
Power Supply:24V DC
Voltage: 15–30V DC
Current: 3–8 mA
Rating: 2A @ 250V AC
Resolution: 10-bit
Load Impedance: ≥500Ω (voltage)
Baud Rate: 9600–115200 bps
Isolation:1500V AC
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Torque Response: ≤ 2 ms
Accel/Decel Rates: Up to 3x faster vs
Overload Capability: 200%
Type:Dynamic Performance Module
Power Supply:24V DC (±10%)
Power Consumption:≤ 3 W
Input Channels:8x Isolated Voltage Inputs
Resolution:16-bit
Accuracy:±0.1% of FS (Full Scale) at 25°C
Input Impedance ≥1 MΩ
Sampling Rate:10 ms/channel
Channel-to-Channel: 300V AC
Overvoltage Protection:±30V continuous
Overload Protection:±30V (voltage)
Power Supply:24V DC
Power Consumption:≤ 1.5 W
Input Channels:4x Isolated Channels
Voltage: 0–10V, ±10V, 0–5V
Current: 0–20mA, 4–20mA
Resolution:12-bit
Sampling Rate:2 ms per channel
Voltage: ≥100 kΩ
Isolation:1500V AC
Type:8-Channel Isolated
Sink/Source: Auto-detecting
Voltage Range: 15–30V DC
Input Current 3–8 mA
Response Time:≤ 2 ms
Isolation:1500V AC
Power Supply:24V DC
Power Consumption:≤ 1.8 W
DRIVE BOARD
RESISTIVE NETWORK
STATUS LED INDICATORS
YT204001-FK
Number of Channels: Typically 4 or 8
Switching Capacity: Up to 2A per channel
Supply Voltage: 24V DC
Isolation Voltage: 1500V AC
Response Time: <1ms
Input Voltage:24V DC nominal (15-30V range)
Input Current :3-5mA per point
Output Type:Relay (Form C) or Solid State
Output Rating:2A @ 30V DC
Isolation Voltage:1500V AC
Response Time:<1ms (input)
Contact Configuration:96-position (48x2 rows)
Contact Material:Gold-plated copper alloy
Current Rating:1A per contact (max)
Voltage Rating:60V DC max
Contact Resistance:<20mΩ (initial)
Insulation Resistance:>100MΩ @500V DC
Mating Cycles: >500 insertions
SINAMICS S120
Single motor module
input: 600 V DC output: 400 V 3 AC, 18 A
design: booksize D type internal air cooling
optimized pulse patterns and support of
the extended Safety Integrated functions
incl. DRIVE-CLiQ cable
Supply Voltage:24V DC ±10%
Power Consumption:20W (typical)
Processor:32-bit DSP (200MHz)
Memory:16MB Flash, 8MB RAM
Isolation Voltage:1500V AC (I/O to logic)
Number of outputs 16, electrically connected
Short circuit protection yes
Total current per module 8 A on 100 % duty cycle
Voltage drop ≤ 0,3 V at 0,5 A
Internal currentconsumption(from V+ bus)0 mA
External currentconsumptionLoad current
Operating mode Source operation
Voltage range 10…32 VDC, smoothed,max. 10 % residual ripple
Input Power:24V DC (±10%) or 100–240V AC
Power Consumption:<20W (typical)
Analog Inputs:4–20mA, ±10V, IEPE (2-wire)
Relay Outputs:4x SPDT (5A @ 250V AC)
Communication:Ethernet, Modbus TCP/RTU
Analog I/O update rate: 1 kHz
Digital I/O update rate: 10 ms
Standard range: -20°C to +60°C
Extended range: -40°C to +70°C
Power consumption: Max. 10W
Humidity: 5% to 95% RH
16-bit resolution for analog inputs/outputs
Input Voltage Range:5-30V DC (HTL)
Input Frequency:0-500kHz
Output Signal:Differential (RS422) or single-ended
Output Current:20mA max
Power Supply:24V DC ±10%
Power Consumption:5W typical
Resolution: Up to 4096 pulses/revolution
Signal Delay: <100ns
