Rated Current (Ie):0.1-15A (adjustable)
Supply Voltage:24V DC/AC (±15%)
Power Consumption:≤3W
Contact Rating:5A @ 250V AC (Aux. contacts)
Isolation Voltage:2500V AC
Control Inputs:24V DC
Operating Voltage:24V DC ±10%
Power Consumption:8W max
Digital Inputs:6x (24V DC, opto-isolated)
Analog Inputs:2x (0-10V/4-20mA)
Relay Outputs:2x (5A @ 250V AC)
Isolation Voltage:1500V AC
Processor: ARM Cortex-M4 168MHz
Memory: 256KB Flash
Supply Voltage:24V DC (±10%)
Power Consumption:≤5W
Digital Inputs:8x (24V DC, opto-isolated)
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Relay Outputs:2x (5A @ 250V AC, Form C)
Isolation Voltage:2500V AC
Processor: 32-bit ARM Cortex-M4
330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length:2.0 in
Minimum case length: 3.9 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
Input Voltage:3-phase 380-500V AC ±10%
Output Voltage:0-400V DC (armature)
Current Rating:2000A continuous
Field Supply:0-300V DC, 20A
Control Voltage:24V DC ±10%
Speed Regulation: ±0.1% of base speed
Torque Control: ±1% of rated torque
Response Time: <20ms for 90% speed change
Resolution: 16-bit
Standard: PROFIBUS DP-V1 (12Mbps)
Optional: DeviceNet, Modbus RTU
Field Voltage Output:50-300V DC
Field Current Rating:Up to 20A
Control Voltage:24V DC (±10%)
Isolation Voltage:2500V AC
Response Time:<10ms
Analog Inputs: 2x (0-10V/4-20mA) for field ref
Digital Inputs: 3x (24V DC) for enable/disable
Relay Outputs: 2x (5A @ 250V AC)
Analog Signal: 0-10V
Dual Output Voltage – +24V DC
Remote On/Off – 24V DC control input
Input Voltage:3-phase 380-500V AC (45-65Hz)
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output
Repetitive Blocking Voltage (VDRM):8000V
Average On-State Current (ITAV):1600A @ 85°C
Surge Current (ITSM):40kA (8.3ms half-sine)
Gate Trigger Current (IGT):200mA (max)
High Surge Current – Up to 40kA
Critical dV/dt:1000V/μs
Standard Range: 0 to 500 mils
Extended Range Options: Up to 1000 mils (25.4 mm)
Sensitivity: 200 mV/mil
Phase Delay: < 1° at 1 kHz
Voltage Output: –2 V to –18 V DC
Current Output (Optional): 4–20 mA
Standard: 0–500 mils
Sensitivity:200 mV/mil
Extended Options: Up to 1,000 mils
Voltage: –2 V to –18 V DC
Current (Optional): 4–20 mA
Linearity:±1% of full scale
Power Supply:–18 to –24 V DC
Output Type 4-20 mA
Output Channels 16
Output Ripple < 100 mV
peak-to-peak at power line frequency
Output Temperature Drift 0.005% of Full Scale/°C
Output Readback Accuracy ±4% of Full Scale
Output Current Linearity ± 0.05% of Full Scale nominal.
Resolution ± 0.05% of Full Scale
Calibrated Accuracy ± 0.35% of Full Scale (25oC) including linearity
Directly Settable Output Current Range 0 mA, 2.9 mA to 21.1 mA
Maximum Output Compliant Voltage 16 V
330701 3300 XL 11 mm Probe
1/2-20 UNFthread, without armor
Minimum unthreaded length:0.0 in
Minimum case length: 2.0 in
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
Supply Voltage:24V DC (±15%)
Power Consumption:2W (base unit)
Backplane Current:800mA max
Isolation :1500V AC
Modules per Unit: Up to 8 I/O modules
Digital I/O :16/32 channel
Analog I/O:8/16 channel
Communication:PROFIBUS, Ethernet
Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):230 V AC
Supply Voltage:100 … 240 V AC
Memory Size:142 kB
Memory Type User Data:RAM
Controller Processing Time:0.00008 ms
Number of Digital Inputs:8
Number of Digital Outputs:6
Number of Digital Configurable I/Os:0
Input Voltage Type:DC
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC
3300 XL 8 mm Extended TemperatureRange (ETR) Proximity Probes
330193 3300 XL 8 mm Probe
M10 x 1 thread,without armor
Minimum unthreaded length: 90 mm
Minimum case length: 20 mm
10 1.0 meter (3.3 feet)
00 Not required
40 input channels per FTA.
Industry standard field device connections (2-wire).
Standard DIN rail compatibility.
Simple installation and connection.
24 Vdc operation.
SmartSlot connection for ‘one to many’ hot replacement of input modules.
Fused field power supply per channel.
On-board Light Emitting Diode (LED) indication of field power supply integrity.
Supply Voltage:24-250V DC
Power Consumption:6W (typical)
Analog Inputs:12x (16-bit, ±10V/4-20mA)
Digital I/O:24x (24V DC, opto-isolated)
Isolation :3000V AC (I/O to logic)
Memory: 512MB DDR3
178850-00Upgrade Kit
Non-approved
Voltage:±12V to ±24V DC
Signal Integrity: Maintains API 670
Operating Temp: –30°C to +65°C (–22°F to +149°F)
Humidity: 0–95% non-condensing
Standard Range: 0–500 mils
Extended Options: Up to 1000 mils
Sensitivity:200 mV/mil (7.87 V/mm) ±5% per channel
Voltage Output: –2 V to –18 V DC
Current Output (Optional): 4–20 mA
Linearity:±1% of full scale
Power Supply:–18 V to –24 V DC
Memory:256MB Flash
Control Loop Speed:<50μs
Analog Inputs:8x (16-bit, ±10V/4-20mA)
Digital I/O:16x (24V DC, opto-isolated)
Encoder Interfaces:2x (A/B/Z + SSI)
Isolation Voltage:2500V AC (field to logic)
Supply Voltage:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol :ControlNet
Data Rate:5Mbps
Max Nodes:99 per network
Max Cable Length:1000m
Rated Current:1A or 5A
Voltage Inputs:100-240V AC
Burden:<0.2VA (current)
Current (0.1-40In):±0.5%
Voltage:±0.2%
Frequency:±0.01Hz
Operating range: 1.05-1.4 pu V/Hz
