+/-10 Vdc I/O : -10 Vdc to +10 Vdc
4-20 mA Barrier I/O:4-20 mA DC
Voltage Compliance:13.66 V
Isolation:500 Volts
Power Consumption:7.0 Watts, typical
Accuracy:Within ±0.33% of full-scaletypical, ±1% maximum
Product No. : 3805H
Product type : Analog Output Module
Output current range : 4-20 mA output (+6% overrange)
Points : 8 output
Current Loop, DC Coupled
Type : TMR, AO
Resolution : 12 bits
Output Accuracy : <0.25% (in range of 4-20 mA) of FSR (0-21.2 mA), from 32° to 140° F (0° to 60° C)
Range: Typically 4-20 mA
Input Impedance:≤ 10 Ω
Load Capacity: Standard 0-500 Ω
Voltage: 24 V DC
Test Voltage: Typically 1.5 kV AC
Typical: ±0.1% of full scale
Communication Interface:RS-232, RS-485
Data Transfer Speed:Up to 115,200 bps
Power Supply:24V DC
Mounting Type:DIN rail mounted
Operating Temperature:-20°C to 60°C (-4°F to 140°F)
Storage Temperature:-40°C to 85°C (-40°F to 185°F)
Humidity Tolerance:5% to 95% non-condensing
Voltage: 125 VDC Nominal
Power Consumption: Typically < 5W
Input-to-Input: 1500 VAC min.
Input-to-Output/Logic: 1500 VAC min.
Output-to-Output: 500 VAC min.
Output/Logic-to-S+ I/O: 500 VAC min
Mark V system
Voltage Rating: Typically 24V DC
Operating Temperature:
0°C to 70°C (32°F to 158°F)
Storage Temperature:
-40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95% RH
Rated Voltage:400 V AC (3-phase, 4-wire)
Rated Current:22 A (continuous)
Rated Frequency:50/60 Hz
Transfer Time:< 100 ms (typical for open transition)
Withstand Current:10 kA (IEC 60947-6-1)
Mechanical Life:10,000 cycles (minimum)
SIMADYN D T400 with axle winder with min.
Max Axles (Drives):4 axes per module
Cycle Time:≤1 ms (deterministic)
Encoder Interfaces:2x (HTL/TTL, sin/cos) per axis
Supply Voltage:24 V DC ±5%
Power Consumption:8 W
Min/Max Diameter Ratio:1:50
Number of Positions:10 Position
Pitch:9.53 mm
Current Rating:30 A
Voltage Rating:300 V
Wire Gauge Min:22 AWG
Wire Gauge Max:14 AWG
Type:Terminal Block
Number of Rows: 2 Row
Mounting Style:Panel Mount
Protocol: PROFIBUS DP-V0
Data Transfer Rates:up to 12 Mbp
Connector Type: 9-pin D-sub
Electrical Interface: RS-485
Voltage: +5 V DC
Power Consumption: 1-2 W
Max. Input Data (to Master): Up to 244 bytes per cycle
Max. Output Data (from Master): Up to 244 bytes per cycle
Protocol: PROFIBUS DP-V0 Data Transfer Rates:up to 12 Mbp Connector Type: 9-pin D-sub Electrical Interface: RS-485 Voltage: +5 V DC Power Consumption: 1-2 W Max. Input Data (to Master): Up to 244 bytes per cycle Max. Output Data (from Master): Up to 244 bytes per cycle
CPU Type: 32-bit RISC-based processor
Clock Speed: 100–200 MHz
Program Memory: Up to 4 MB Flash
Data Memory: Up to 2 MB RAM
Execution Speed: 0.1 ms
Input Voltage: 24V DC
Resolution: 12-bit to 16-bit
