Input Voltage:380-480V AC, 3-phase (±10%)
Output Voltage:115 V AC or 230 V AC ±10%, 50/60 Hz
Current Rating:20A (continuous), 30A (peak)
Efficiency:>94% (at full load)
Power Factor:>0.98 (at full load)
Overvoltage:+15% of setpoint
Overcurrent:110% for 60min
Reverse Polarity:Instant cutoff
Short Circuit:<1ms response
Interface:RS-422/RS-485
Communication function: Half-duplex
Synchronization method:Start-stop synchronization
Transmission code:binary
Character length:8 bits
Stop bit length:1/2 bits
Transmission distance:Maximum 15 m
Current consumption:0.5 A
Ambient Temperature Range-22 to 149°F
Class I, Div. 2, Groups A, B, C, D Standard
ANSI/ISA - 12. 12.01-2015
Functional Acronym/Abbreviation PAIC
Model Type Analog I/O Pack
Non-Hazardous CertificationUL E207865
Up to 12 Mbps.
Auto-detection of baud rate
Address Range: Configurable from 0 to 126
Supply Voltage: 24 VDC ±10%.
Power Consumption: < 2 W
Operating Temperature: -10°C to +55°C.
Storage Temperature: -40°C to +70°C
Input Voltage: +5V, +12V
Current Consumption: Typically under 2A
RS-232/RS-485
Operating Temperature: 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Relative Humidity: 5% to 85% (non-condensing)
Typically 24V DC or 12V DC
Output Type Source
Load Voltage 15 30 VDC Maximum
On-State Voltage 24 V (typ), load current @ 0.5A
Off-State Leak Current 5.0 µA (max)
Turn-On/Turn-Off Time 10 ms (max)
Series Mark V
Part Number DS200DTBDG1ABB
Functional Acronym DTBD
Functional Description Mark V Terminal Board
PCB Coating Normal Coating
Revision Quantity 3 Revisions
Mark V Series Grouping Group 1
Assembly Type Normal Assembly
Local Bus Power 12 VDC at 300 mA
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985 Airborne
Contaminants Class G3
Description: I/O Module
Compatibility: 3500 Series
Analog Inputs: 4–20 mA, 0–10 V
Power Supply: 24 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F)
Humidity Tolerance: Up to 95% non-condensing
Input Power Min: 18 Vdc Max: 36 Vdc
Current Max: 1.7 A
InrushCurrentMax: 2.7 A, less than 5 ms
Max: 12 dynamic signals and 2 Keyphasorsignals
DynamicRange110 dB @ fs = 102.4 ksps
Signal/NoiseRatio110 dB @ fs = 102.4 ksps
A/DConversionSigma-Delta 24 bits nominal
Bandwidth 0 to 40 kHz
Power Supply: 24V DC (±10%)
Power Consumption: 3.5W (typical)
Number of Channels: 8
Current Output Range: 4-20mA
Voltage Output Range: 0-10V
Resolution: 16-bit
Accuracy: ±0.1% of span
Current: ≤750Ω
Voltage: ≥1kΩ
Input Voltage:24V DC nominal
Input Current:3-8mA per channel
Isolation:1500V AC (field to logic)
Response Time:<1ms (ON/OFF)
Number of Channels:32
Voltage Rating:1600V (V_RRM)
Current Rating:300A (I_FAVM)
Surge Current:8kA (I_FSM, 10ms)
Forward Voltage:1.25V @ 300A (typical)
