
Optional Auxiliary Board
Input Voltage: +24V DC
Power Consumption: <10W
Channels: 8 or 16
Signal Range: 4-20mA
Resolution: 16-bit ADC
Voltage Levels: 24V DC
Proximity Probe HousingAssemblies
28 3300 XL 8 mm probe, multiple approvals
05 0.5 m (20 in)
3.5 in (88.9 mm) = 35
3.2 in (81.28 mm) = 032
03 Two plugs, one 3/4-14 NPT fitting
One 3/4-14 to 1/2-14 NPT SST reducer
One cable seal grip with grommets for the
following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT
3300 XL 11 mm Proximity Probes
330707 3300 XL 11 mm Probe
5/8-18 UNFthread, without armor
Minimum case length: 2.5 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required
3300 XL 8 mm Proximity Probes
330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum case length: 3.6 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector
standard cable
05 CSA, ATEX, IECEx Approvals
3300 XL Standard Extension Cable
3300 XL Standard Extension Cable
030 3.0 meters (9.8 feet)
00 Standard cable
05 CSA, ATEX, IECEx Approvals
Proximity ProbeHousing Assemblies
21000 aluminum probe housing assembly
27 3300 XL NSv probe, selectablehazardous area approvals
05 0.5 m (20 in)
Maximum length 4.0 in (101.6 mm)
2.6 in (25.4 mm) = 026
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
023/4-14 NPT
Proximity Probe HousingAssemblies
27 3300 XL NSv probe, multiple approvals
05 0.5 m (20 in)
No standoff adapter = 00
3.5 in (88.9 mm) = 035
03Two plugs, one 3/4-14 NPT fitting
One 3/4-14 to 1/2-14 NPT SST reducer
One cable seal grip with grommets for the
following cable sizes
• 1/8 to 3/16 inches
• 1/4 to 5/16 inches
• 5/16 to 3/8 inches
02 3/4-14 NPT
G120L Drive Board
Supply Voltage:24V DC
Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA
Frequency Range: 0Hz - 650Hz
Switching Frequency: 2kHz - 16kHz
Control Response Time: <5ms
POWER SECTION BOARD
SIMOVERT MD
PEU4 POWER SECTION BOARD
Compatible Drive Rating: 75kW
DC Link Voltage Range: 510V - 650V DC
Output Current: 165A
Switching Frequency: 2kHz - 8kHz
ACTIVE LINE MODULE
ACTIVE LINE MODULE
SINAMIC S120
3 PHASE
INPUT 380-480 VAC
50/60 HZ
OUTPUT 16 KW
27 AMP
600 VDC
INT COOL
NORMALISING MODULE
NORMALISING MODULE
ABOFOR DEVICES
186 AMP
3 PHASE
380-460 VAC AND 510-620 VDC
AC DRIVE
AC DRIVE
SIMOVERT MASTERDRIVE
VECTOR CONTROL
COMPACT PLUS
17.5 A
7.5 KW
3-PHASE
380-480 V AC
50/60 HZ
BASIC LINE MODULE
SINAMICS S120 BASIC LINE MODULE
INPUT: 3 PHASE
380-480 VAC
50/60HZ
OUTPUT: DC 600 V
34 AMP
20 KW
FRAME SIZE: BOOKSIZE
INTERNAL AIR COOLING
INCL. DRIVE-CLIQ CABLE
CONTROL INTERFACE BOARD
CONTROL INTERFACE BOARD
SINAMICS S
FOR 3PH
380-480 VAC
50/60 HZ
380 A MOTOR MODULE
Control Module
Voltage: 24V DC (±15%)
Power Consumption: ≤10W
Isolation: 1500V AC
Analog Inputs:0-10V/4-20mA
Processor: 32-bit ARM
Memory:128MB Flash
Programmable Motion control
SIMOTION C240 PN
Programmable Motion control system
for PROFINET and PROFIBUS Drives
OnboardI/O 18 DI/8 DO (requires V4.1 SP2 HF3/4)
SENSOR BOARD
SINAMICS S120
SENSOR MODULE SMC10
SENSOR BOARD FOR EVALUATION
OF A RESOLVER
WITHOUT DRIVE-CLIQ CABLE
DC power driver board
Manufacturer: Siemens AG
Main Power: 24-80V DC
Control Voltage: 24V DC (±10%)
Switching Frequency: 16kHz PWM
Power Dissipation: 35W max
Isolation Voltage: 1500V AC
Control Unit
SINAMICS S120
Control Unit CU310 DP
with PROFIBUS interface
without CompactFlash card
ACTIVE LINE MODULE
SINAMICS S120 ACTIVE LINE MODULE
INPUT: 3AC 380-480V, 50/60HZ
OUTPUT: DC 600V, 60A, 36KW
FRAME SIZE: BOOKSIZE INTERNAL AIR COOLING
INCL. DRIVE-CLIQ CABLE
THYRISTOR MODULE
Current Rating:1700A
Voltage Rating:1200V
Gate Trigger Voltage:3V typical
Gate Trigger Current:200mA typical
On-State Voltage Drop:1.6V typical at rated current
Critical Rate of Rise:100A/μs
Isolation Voltage:2500V AC
BASIC OPERATOR PANEL
BASIC OPERATOR PANEL
SINAMICS G120
BOP-2
LCD
MONOCHROME
2-LINE DISPLAY
FOR USE WITH G120 INVERTERS
IP55
IGD3/R2 DRIVER BOARD
Control side (logic): +15V / -8V
Auxiliary power: 24V DC
Peak gate current: Up to ±15A
Gate voltage range: +15V
Switching Frequency: Up to 20 kHz
Isolation Voltage: ≥2500V RMS
Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.