GE 90-30 Series PLC

Expansion Backplane Cable

Series:Series 90-30
Part Number:IC693CBL303
Type:Cable
Purpose:HHP connection
Connector type:Canon DA15S with solder pot
Hood:AMP 207470-1 connector shell
Cable Type:Belden 9508
AWG:#24 (.22 mm2)
Cable Length:6 feet (2 meters)

Expansion Backplane Cable

Series:Series 90-30
Part Number:IC693CBL301
Product Description:I/O Bus Expansion Cable
Type:Cable
Length:2 meters
Compatibility:CPUs, remote racks
Feature:Wye adapter
Supported CPUs:Series 90--30 CPUs
Cable Shield:Continuous
Connector 1st end:25-pin D connector (male)
Backplane current draw:N/A
Maximum number in a system:Depending on the CPU

Motion Mate Axis Module

Series:Series 90-30
Product Description:Axis Positioning Module (APM)
Part Number:IC693APU302
No. of Axes:2 Axis
Operating modes:Standard mode; Follower mode
Module LED indicators:EN1, EN2, STST, OK and CFG
Servo Loop Update:2 milliseconds
Slot width:Single slot
Terminal block:Weidmuller RD25 910648 o or equivalent
Connector Types:24-pin High Density, 25-pin D Type
No. of modules per baseplate:Three (3)
Compatibility:Series 90-30 PLCs
LED indicators:EN1; EN2; STAT; OK; CFG
Current draw:800 mA @ 5 VDC

Analog output module

Series:Series 90-30
Part Number:IC694ALG391
Channel update rate:5 ms
Product Description:Analog output module
No of Channels:Two (2) output channels
Digital Resolution:12 bits, typical
Range:4-20 mA, 0-20 mA
External Supply Voltage Range:20 to 30 VDC
Isolation:1500 VAC
Update Rate:5 msec
Resolution at 4-20 mA:4 microamps
Isolation, Field to logic side:1500 VAC for 1 minute
Resolution at 0-20 mA:5 microamps
Maximum Compliance Voltage:25 Volts
External Supply Voltage Range:20 to 30 VDC (24 VDC typical)

OUTPUT MODULE

Series:Series 90-30
Range:-10 to +10 Volts
Part Number:IC693ALG390G
Product Description:Analog Voltage Output
No of Channels:2
External Supply Voltage Range:18 to 30 VDC
External Supply Voltage Ripple:10%
Isolation:1500 Volts RMS field to the logic side
Update Rate:5 ms all channels
Resolution:2.5 mV
Accuracy:+/- 5 mV at 25 degrees Celsius

Input Module

Series:Series 90-30
Brand:GE Fanuc
Accuracy:0.1 % full scale
Part Number:IC693ALG221
No of Channels:4
Range:4-20 mA, 0-20 mA
Update Rate:2 ms all channels
Input Impedance:250 ohms
Input Filter Response:325 Hertz

Input Simulator Module

Series:Series 90-30
Part Number:IC693ACC300
Type:I/O module
Number of points:8/16
Power source:DC
Output voltage range:18 to 30 Volts DC
Relative humidity:5 to 95% (non-condensing)
Shock:15 G at 11 milliseconds
Vibration:1 G at 9 to 150 Hertz

Input Module

Series:Series 90-30
Part Number:IC630MDL325
Module Type:Input Module
Voltage Rating:115V AC/DC
Operating Frequency:48 to 63 Hz
Number of Input Points:16
Number of Groups:2 Input Groups
Indicators:LED Indicators
On-Stage Delay for AC Voltage:10 to 40 ms
On-Stage Delay for DC Voltage:6 to 30 ms
Operating Temperatures:0 to 60°C

Output Module

Slot 1 I/O module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693CHS391M
Description:Expansion baseplate
Product Description:Modular CPU baseplate
Current:420 milliAmperes
No. of slots:Ten (10) slots
Voltage:5 Volts DC
No. of CPU slots:One (1)
Connector:25-Pin female
No. of I/O slots:Nine (9)

High Speed Counter Module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693APU300D
Product Description:High-Speed Counter (HSC) module
No of input channels:Twelve (12) positive logic inputs
Maximum Count Rate:80 kiloHertz
Input signal voltage:5 VDC; 10VDC - 30 VDC
Minimum Count Rate:20 kiloHertz
Input frequency:8 kHz
Input/Output Type:Positive Logic
No. of Logic Inputs:12
Maximum count rate:up to 200 kHz
Output Voltage Range:4.7 to 40 Volts DC
LED indicators:BOARD OK and CONFIG OK
Isolation:250 Volts AC
Power Consumption:250 mA at 5 Volts DC

TEMPERATURE CONTROL MODULE

Series:Series 90-30
Part Number:IC693TCM302
Output voltage range:18 to 30 Volts DC
Off-state leakage (maximum):0.1 milliAmps
Load current:100 milliAmps
Internal power used:150 milliAmps at 5 Volts DC
Number of channels:8 input / 8 output
Product Lifecycle Status:Discontinued/Obsolete
Thermocouple impedance:30 Ohms (maximum)

Output Module

Series:Series 90-30
Part Number:IC693MDL753
Product Description:Discrete output module
Product type:Digital I/O
No of Channels:Thirty-Two (32)
No. of output groups:Four (4)
Compatibility:GE Fanuc 90-30 PLCs
No. of groups:Four (4)
Channels per group:Eight (8)
Output points:32
Nominal output voltage:12-24 VDC
Module voltage input:5 Volts DC
Nominal Input voltage:12 / 24 VDC
Off response time, maximum:0.5 ms
LED current draw:4.7 milliamps
Inrush current:5.4 Amps
Current draw:260 mA
Off-state Leakage:1 mA maximum
On response time, maximum:0.5 ms
Off response time, maximums:2 ms

Input Module

Series:Series 90-30
Manufacturer:GE Fanuc
Part Number:IC693MDL646
Rated Voltage:24 Volts DC
No of Channels:Sixteen (16)
Input signal range:0-30 VDC
On-state Voltage:11.5 to 30 Volts DC
Off-state Voltage:0 to +5 Volts DC
Off state voltage:0-5 VDC
On-state Current:3.2 mA minimum
Off-state Current:1.1 mA maximum
On response time, typical:1 ms
Off response time, maximum:1 ms
Nominal Input voltage:24 VDC

AC Output Module

Series:Series 90-30
Part Number:IC693MDL330
Product Type:Output Module
Rated Voltage:120 to 240 V AC
Outputs:8
Output Current Per Point:2 A

Single-Slot CPU Module

Series:Series 90-30
Part Number:IC693CPU364
Serial port:RS-485 (via power supply
User memory:240K Bytes
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Microprocessor:80386EX
Processor speed:25 Megahertz
Register memory:240 kilobytes
Number of Ethernet ports:One (1)

Profibus interface module

Series:Series 90-30
Part Number:IC693CBL305
Cable Length:1 Foot
Cable type:Wye Cable
Wire Shield:Yes
Average Weight:2.0 Pounds
Cable Housing:Yes
Conducting Material:28 AWG Size Wire

Motion Mate Control Module

Series:Series 90-30
Part Number:IC693DSM302
Compatible components:Programmable logic controllers
Block processing time:Less than 5 milliseconds
Number of axis:2
Serial port:RS-232
Non-volatile storage:10 programs and 40 subroutines

CPU MODULE

Series:Series 90-30
Part Number:IC693CPU363
User memory:240K Bytes
CPU type:Single slot CPU module
Register memory:240 kilobytes
Serial port:RS-485 (via power supply
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Serial ports:3
Clock speed:25 Megahertz
Microprocessor:80386EX
Discrete inputs:2048
Discrete outputs:2048
Type of Memory Storage:RAM and Flash

INPUT MODULE

Series:Series 90-30
Part Number:IC693MDL645
Module type:Positive / Negative Discrete input
Input Voltage Range:0-30 VDC
Nominal Input voltage:24VDC
Input Current (mA):7 mA
Number of points:Sixteen (16)
Module width:Single (1) slot
Module type:Discrete input
Power Type:DC
Input Voltage Range:0-30 VDC
Input Current (mA):7
Number of points:16
Response Time (ms):7 ms on, 7 ms off

Analog Current/Voltage Combination Module

Series:Series 90-30
Part Number:IC693ALG442
Accuracy:0.25% at 25 degree Celsius
Product Lifecycle Status:Discontinued/Obsolete
No of Output Channels:2, single-ended
Update Rate:8 milliseconds
No of Input Channels:4 differential
Resolution at 0-10 V:2.5 mV
Resolution at -10 to 10 V:5 mV
Input Impedance:800 K Ohms

Analog Current/Voltage Output

Series:Series 90-30
Part Number:IC693ALG392
Resolution at -10 to 10 V:0.312 mV
Product Lifecycle Status:Discontinued/Obsolete
No of Channels:8
Current Range:4 to 20 mA, 0 to 20 mA
Voltage Range:0 to 10 V, -10 to 10 V
Update Rate:8 ms all channels
Resolution at 0-10 V:0.312 mV

Power Supply module

Holdup time:14 milliseconds, minimum
Load capacity:30 Watts
Part Number:IC693PWR331
Series:90-30 PLC
Brand:GE Fanuc
Product Type:High-capacity power supply
Protocol Support:RS485
No. of Outputs:Three (3)
Nominal Rated Voltage:24VDC / 48VDC
Voltage:24 Volts DC
Standard:UL, CE
Full load power rating:50 Watts
Number of terminal screws:3
LED indicators:PWR, OK, RUN, BATT
Description:Power Supply device

CPU 350 MODULE

Series:Series 90-30
Part Number:IC693CPU350
Serial port:RS-485 via power supply
CPU type:Single slot CPU module
User Memory:32K Bytes
Processor type:80386EX
Type of Memory Storage:RAM and Flash
Number of Ethernet ports:N/A
Product type:CPU module
Compatibility:GE Fanuc 90-30 PLCs
Clock speed:25 Megahertz
Current input:670 milliamps
Voltage input:5 Volts DC
Timers / counters:> 2000

Standard Power Supply module

Part Number:IC693PWR321
Series:90-30 PLC
Brand:GE Fanuc
Product Type:Standard Power Supply
Protocol Support:RS485
No. of Outputs:Three (3)
Input Voltage Range, AC:85 to 264 VAC
Input Voltage Range, DC:100 to 300 VDC
Description:Power supply
Voltage:85-264 Volts AC / 100-300 Volts DC
Voltage output:5/24 Volts DC
Communication:RS 485
Power:30 watts
Installation:Leftmost slot of the baseplate