ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Input Power (AC):400–690V (±10%) 3-phase
Motor Power Range:250kW–1.5MW
Control Voltage:Single-phase 26V DC to 30V DC (±15%)
Operating Temp:-15°C to +50°C
Harsh Environment:UL 1203
Busbar Terminals:values 8.9Nm ±0.5
AS-Interface Safety ATEX Gateway
Input Voltage:200–690V AC (-15%/+10%)
Power Range:15–400kW
Control Voltage:Single-phase 24V DC
Relay Outputs:4 × Form-A
AF-650PG: Profibus DP or CANopen
Low Voltage (LV): 380–480V AC
Optional High Voltage (HV):500–690V AC
Short-Circuit Current Rating (I_SC): ≤100 kA
Inrush Current Limit: ≤150% × rated input current
Isolation: ≥2.5 kV
Dynamic braking fuses:690V AC, 100–800A
Ambient Temp Range: -15°C to +45°C
Storage Humidity: ≤95% non-condensing
R8 SINGLE MODULE SP KIT
Forward Voltage: 1200–2500V range
Average On-State Current:500–2000A
Surge Current :10–50 kA
Isolation: ≥2000 V AC
Junction Temperature:>125°C
Supply Voltage:24V DC
Analog Inputs: 0–10 V / 4–20 mA
Communication Ports: Terminals for RS-485
Isolation Rating: ≥1500 V AC
Power Handling: 5-10A
Operating Temperature: -25°C to +70°C
DC Link Voltage Range: 380–525V/690V DC
Current Capacity:50–500 kW
Switching Components:high-power IGBT module
Gate Driver Outputs: 2–16 kHz
Isolation: 2.5 kV
Protocol Support:24V DC signals
Temperature: -10°C to +80°C
Humidity: <95% RH non-condensing
DC Link:1200V
Continuous: 1400A
Pulsed Current: 2000–2800A
Frequency: ≤5 kHz typical
Max. withstand voltage of 1800V
Typical Motor Load: 500–2000 HP induction motors
Voltage Class:1200V
Continuous Current : 650A
Maximum Current: Up to 1300A
Collector-Emitter Saturation Voltage : 2.0–3.0V
Isolation: ≥2500 V DC
Thermal Resistance <0.1°C/W
Voltage: +15V/-8V gate control
Operating Temperature: -40°C to +125°C
ACS880-04 drives
3AXD10000497831
LV AC industrial single drive module
IEC: Pn 500 kW, 715 A, 500 V
UL: Pld 600 Hp, 705 A, 460 V
Number of Phases:3-phase
Enclosure Type NEMA:Open Type
Operating Humidity (RHamb):5 ... 95
Sound dB (A):72 dB(A
Frequency (f): 47.5 ... 63 Hz
Frame Size: R11
Input Voltage (Uin):380 ... 500 V
MotiFlex e180
MFE180-04AN-05A0-4+L518+N8020
3P, 380 VAC
IN: 5 A, HALL incremental encode
A free Mint programming license
easy positioning tasks
drive supports various feedback types
LV AC machinery drive module
IEC: Pn 3 kW, 8 A, 400 V
UL: Pld 5 Hp, 7.6 A, 480 V
(ACS880-M04-08A0-5)
Number of Phases:3-phase
Degree of Protection:IP20
Enclosure Type NEMA:Open Type
Altitude:1000 m
Operating Humidity (RHamb):5 ... 9
Power Factor:0.98
Sound dB (A):47 dB(A)
Output Power: 1.1 kW
Output Voltage: 380–480 V AC, 3-phase ±10%
Continuous current: 4.5 A (at 40°C)
Dynamic peak current: Up to 7.0 A
Input Voltage: 3-phase 380–480 V AC
Input Current (Typ.): 4.6 A @ 480 V AC
Supply Voltage: 24 V DC
Power Consumption: ≤ 5 W
Isolation Voltage: 500 V AC
Voltage range: 0–30 V DC
Logic thresholds: ≤ 5 V DC
Ethernet/IP: TCP/IP, IPv4,
AC Input: 380–480 VAC
DC Input:500–750 VDC
Output Charging Voltage: 24/48/110 VDC
Range: 10–50 A
Current Accuracy: ±1%
Efficiency: ≥92% under full load
Full performance: -10°C to +50°C
Humidity: ≤95% RH (non-condensing)
RS-485 or CAN Bus
Modbus RTU/TCP compatibility
Overvoltage/Undervoltage Protection
Overcurrent Protection
Short-Circuit Protection
Temperature Monitoring with automatic derating
Clock Speed: 800 MHz – 1.5 GHz
RAM: 2 GB DDR4
Operating Voltage: 24 V DC
Power Consumption: ≤18 W
Isolation: ≥3000 V AC
Ethernet Interfaces:2× Gigabit ports
Discrete I/O: 12–24 V DC
Analog Interfaces: 4–8 channels
Operating Voltage: 24 V DC
Power Consumption: <12 W
Input Protection:±40 V peak transient
Digital I/O: 16 channels
Analog I/O (Optional): 4 channels
Ethernet: 2× 10/100 Mbps ports
Serial: RS-232/RS-485 for legacy devices
Fieldbus: PROFIBUS DP
68295505
System Voltage:380–500V AC
Frequency Range:10–20 kHz
Filter Topology:LC filters (inductors + capacitors)
Operating Temperature:-15°C to +50°C
ACS880 Liquid-Cooled Multi-Drives
ACS600 Single Drives
VARISTOR UNIT
Protects ACS600 single drives
Protection DutyAC Input Line Transients
Voltage Rating:380–500V AC (50/60 Hz)
Energy Absorption:≥ 120 joules
Clamping Voltage:1.3–1.5x V
Maximum Continuous Voltage:550 V DC link
MEMORY UNIT KIT
AINF6 3.42 +ZMU-03 SP
Signal Compatibility: 4–20 mA, 0–10 V, ±10 V
Resolution: 16-bit precision
Storage Capacity:2–32 GB
Analog Input Module (AINF6): 24 V DC (±10%)
Voltage Range:300–500 V AC
3AUA0000031096
ACS800 Main Board
frequency converter communication board
Auxiliary Power Input: 24 V DC (±10%)
Power Consumption: ≤5 W (typical)
Digital I/O:24 V DC
Analog Inputs: 0–10 V or 4–20 mA
