AMIKONG EXCESS CONTROL SYSTEM PARTS
Specializing In:Automation Spares(DCS, PLC, CNC) Servo Drives HMI Power supplies Controllers
-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
SEE PRODUCTS IN SEARCH PAGE ()
- Home
- ALL MANUFACTURERS
- Bently Nevada
- 3300 XL 8mm Proximity Transducer
- 330171-00-12-50-01-05
In Stock
Ships by Thursday, September 3
Fast Shipping Available
We provide 1 year warranty for all remaining parts.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
The warranty period is one year from the date of shipment, unless otherwise stated in the parts description. We guarantee that the project will not exhibit functional defects that may occur under normal operating conditions during the warranty period.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
In the event of a defect, we will send new equipment, repair equipment or refund the purchase price based on our availability. You must contact us to obtain a return authorization and return the defective device to us within 14 days of reporting the defect.
We have been working hard to update our inventory. If we have stock or parts available for new factory purchases, you can contact the order online.
If we do not currently have an inventory, the displayed quantity will show "Ask". Please create an online quote or contact us by phone, fax or email to check availability.
Amikon offers a wide range of components, products and services related to industrial automation. We have a large surplus of stocks and are also distributors of new products from a variety of quality manufacturers.
Technical specifications for 330171-00-12-50-01-05
-
Product Model330171-00-12-50-01-05
-
Spare Model330171-00-12-50-01-05
-
Product Parameters5 mm Proximity Probe
-
Tariff Code90318090
-
Country of originUSA
-
Place of shipmentXiamen, China
-
In stock1 unit
-
Estimated Shipping Size0.52x3.05x500cm
-
ManufacturerBently Nevada
-
Weight0.32 kg
-
Unthreaded Length Option0.0 in (0 mm)
-
Overall Case Length Option1.2 in (30.5 mm)
-
Total Length Option5.0 m (16.4 ft)
-
Connector OptionMiniature coaxial ClickLoc connector with connector protector, standard cable
-
Agency Approval OptionMultiple Approvals
-
Probe Thread1/4-28 UNF-2A
-
Armor ConfigurationWithout armor
-
Probe Tip Diameter5.2 mm (0.21 in)
-
Recommended Gap1.27 mm (50 mils)
-
Linear Range0.25 to 2.3 mm (10 to 90 mils)
Description
Bently Nevada 330171-00-12-50-01-05 is a 3300 5 mm non-armored proximity probe with a 1/4-28 UNF thread, 1.2-inch overall case length and 5.0-metre total length.
This five-metre probe is designed for connection to a compatible five-metre 3300 5 mm Proximitor Sensor. Confirm cable routing, minimum bend radius, connector condition, mounting geometry and approval requirements before replacement.
This five-metre probe is designed for connection to a compatible five-metre 3300 5 mm Proximitor Sensor. Confirm cable routing, minimum bend radius, connector condition, mounting geometry and approval requirements before replacement.
Information
Overview
Manuals
Product Applications
Compatibility
Lifecycle & Replacement
Features:
- 3300 5 mm probe with 1/4-28 UNF thread and no armor
- 0.0-inch unthreaded length
- 1.2-inch overall case length
- 5.0-metre total probe length
- Direct use with a five-metre Proximitor Sensor
The probe supports shaft-vibration, axial-position, Keyphasor and speed measurement through a compatible 3300 5 mm Proximitor Sensor system. Verify the complete probe, cable, connector, mounting, target material and approval configuration before commissioning.
330171-00-12-50-01-05 Bently Nevada: Verify the exact order code, probe geometry, cable length, connector, compatible 3300 5 mm system and controlled Bently Nevada documentation before installation or replacement.
Bently Nevada 330171-00-12-50-01-05 3300 5 mm Proximity Probe Manuals, Datasheets, Official Documents, Links
Important Notice: Official documents are provided through manufacturer links. Accessories, manuals, cables, calibration data, software, certificates, and other items are not included with this equipment unless listed in the stock item description.
- Continuous relative-vibration monitoring on journal-bearing shafts
- Static axial-position measurement on thrust-bearing machinery
- Phase-reference measurement for vibration analysis
- Rotational-speed measurement with the five-metre probe configuration
- Overspeed measurement within the documented transducer-system limits
Install 330171-00-12-50-01-05 only with the specified five-metre Bently Nevada 3300 5 mm Proximitor Sensor.
Confirm the full suffix 00-12-50-01-05 before approving the replacement.
Do not add a standard extension cable to the direct five-metre configuration without controlled approval.
Match the 1/4-28 thread and 1.2-inch case to the existing mounting hardware.
Maintain cable bend radius, connector protection, target compatibility and hazardous-area requirements.
Do not interchange the 5.0-metre option with a 0.5-metre probe-and-extension-cable assembly.
Confirm the full suffix 00-12-50-01-05 before approving the replacement.
Do not add a standard extension cable to the direct five-metre configuration without controlled approval.
Match the 1/4-28 thread and 1.2-inch case to the existing mounting hardware.
Maintain cable bend radius, connector protection, target compatibility and hazardous-area requirements.
Do not interchange the 5.0-metre option with a 0.5-metre probe-and-extension-cable assembly.
Capture the installed five-metre system arrangement before disconnecting the probe.
Label the routing path and connector end to prevent channel cross-connection.
Inspect the entire accessible cable length for crushing, abrasion and tight bends.
Confirm the replacement retains the 1.2-inch case and option 50 total length.
Document static gap voltage, noise and vibration response after installation.
Contact Amikon with 330171-00-12-50-01-05 for sourcing and lifecycle support.
Label the routing path and connector end to prevent channel cross-connection.
Inspect the entire accessible cable length for crushing, abrasion and tight bends.
Confirm the replacement retains the 1.2-inch case and option 50 total length.
Document static gap voltage, noise and vibration response after installation.
Contact Amikon with 330171-00-12-50-01-05 for sourcing and lifecycle support.
Alternative Names
330171-00-12-50-01-05
330171 5 m 3300 5 mm Probe
5 m 1.2 in Case Non-Armored Proximity Probe
Technical notes
Verify the complete 330171-00-12-50-01-05 identification before replacement. Confirm the 0.0-inch unthreaded length, 1.2-inch overall case length, 5.0-metre total length, direct five-metre Proximitor Sensor compatibility, 1/4-28 mounting thread, ClickLoc connector, cable routing and final probe gap.
FAQs
-
Why must this five-metre probe be matched to a five-metre Proximitor Sensor?
+The manufacturer specifies five-metre 330171 probes for use with the five-metre Proximitor Sensor. Mixing system lengths changes the calibrated electrical characteristics and can invalidate the measurement. -
Should an extension cable be added to this 5.0 m configuration?
+Treat the delivered five-metre probe as the direct system-length configuration. Do not add an extension cable unless the controlled Bently Nevada system drawing explicitly calls for one. -
What cable-routing limit matters most for a long non-armored lead?
+Maintain at least the documented 25.4 mm minimum bend radius, avoid crushing or tension and keep the cable away from hot surfaces, sharp edges and high-noise power conductors. -
Can the short 1.2-inch case be used in a deep probe housing?
+Only if the mounting hardware provides the required probe-tip reach and safe thread engagement. Compare the installed mechanical drawing before approving this case length. -
Which dynamic performance should be checked for a high-speed machine?
+Confirm that the complete transducer system supports the required measurement bandwidth; the documented probe-system frequency response extends from 0 to 10 kHz at plus zero or minus 3 dB. -
How should the five-metre cable and ClickLoc end be stored before installation?
+Keep the cable loosely coiled above its minimum bend radius, protect the probe tip and threads and keep the ClickLoc connector capped, clean and dry. -
How can receiving inspection confirm that option 50 was supplied?
+Measure or verify the full 5.0-metre total length, check the 1.2-inch case and compare the complete printed order code with the purchase order and packing documents. -
What signal checks reveal damage after routing the long cable?
+Check continuity, static gap voltage, noise level, vibration response and channel stability before enabling protection functions. Investigate intermittent output while flexing only accessible cable sections gently.
Trusted by 5,000+ plants worldwide | Backed by our vast inventory of top-tier control parts, drives and servo motors, fast shipments are dispatched to cover your urgent needs. ABOUT US >>
Disclaimer: Amikon Limited sells new and surplus products and develops channels for purchasing such products. Amikon Limited is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Amikon Limited is not an authorized distributor of this product, the Original Manufacturer's warranty does not apply. Amikon Limited is not an authorized distributor, dealer, or representative of the products displayed on this website. All product names, trademarks, brands, and logos used on this website are the property of their respective owners. The description, explanation, or sale of products with these names, trademarks, brands, and logos is for identification purposes only and is not intended to indicate any association with or authorization from any rights holder.
Product
You May Also Like
-
-
-
-
330104-00-05-05-02-003300 XL 8 mm Probe, M10 × 1 thread, with armorManufacturer: Bently NevadaView Details -
-
-
-
-
330101-00-24-05-02-003300 XL 8 mm Probe, 3/8-24 UNFthread, without armorManufacturer: Bently NevadaView Details
Product
Product Browsing History
- Q&A
- Policies How to order Part status information Shipping Method Return Policy Warranty Policy Payment Terms Email Marketing Policy VAT and Import Information
- Asset Recovery
- We Buy Your Equipment. Industry Cases Amikong News Technical Resources Why choose us
- Registered Address
-
32D Guomao Building, No.388, Hubin south Road, Siming district, Xiamen,Fujian, China
