Invensys

Analog Output Module

ANALOG OUPUT MODULE
8 OUTPUTS
4-20 MA
12 BIT RESOLUTION

Power Supply High Density Module

Chassis Type:Main/Expansion/RXM
Nominal Voltage:24 VDC
Input VAC @ 47-63 Hz:n/a
Input VDC:22-31
Fuse Rating and Type:15 amps, time-delay
Output Hold Time:2.8 ms minimum
Diagnostic Indicators:PASS, FAULT, ALARM, TEMP,BAT LOW

High Density Main Chassis

8111
CHASSIS
POWER SUPPLY RACK
NO CARDS INSTALLED

Fieldbus Communication Module

INPUT VOLTAGE RANGE (REDUNDANT)24 V dc +5%, -10%
CONSUMPTION7 W (maximum) at 24 V dc
HEAT DISSIPATION7 W (maximum) at 24 V dc
Vibration0.75 g (5 to 200 Hz)
TEMPERATURE-40 to +70°C (-40 to +158°F)
RELATIVE HUMIDITY5 to 95% (noncondensing)
ALTITUDE-300 to +12,000 m (-1,000 to +40,000 ft)

Network Communication Module

Input Voltage: 24 VDC
ower Consumption: 5 W
Modbus TCP/IP
Ethernet/IP
OPC (as applicable)

Analog Output Baseplate

Current Output: 4–20 mA
Voltage Output: Optional 0–10 V DC
Typically ±0.1% of full scale 
Current Output: 750 Ω (4–20 mA)
Voltage Output:  ≥ 1 kΩ (0–10 V)
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)

INPUT MODULE / ANALOG

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)
Scan time:<1 ms for all 32 points

High Density Main Chassis

Input Voltage:100-240V AC
Power Consumption:300W max
Backplane Power:5V DC, 24V DC
Backplane Type:High-speed TMR bus
Data Rate:100 Mbps