Nominal Input Voltage: 24 V DC
Allowable Input Range: 18–32 V DC
Rated Output Power: 20–30 W
Efficiency: ≥ 85%
Primary Output: 24 V DC (±1%)
Secondary Outputs: Optional 5 V DC / 12 V DC
Maximum Continuous Current: 1.5 A @ 24 V DC
Overvoltage Protection (OVP): Auto-cutoff at ≥35 V
Undervoltage Lockout (UVLO): Shutdown at <15 V
Model Number: AIBP-51
ABB Product Number: 68257913
Dimensions: 30 cm x 10 cm x 3.8 cm
Weight: 0.25 kg
Voltage Rating: Suitable for 380-550 VAC applications
Compatibility: ABB ACS800 Series inverters
Operating Voltage: 24V DC
Power Consumption: 5W to 15W
Operating Temperature:0°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
24 VDC Input Power
Supply Voltage: 24V DC (±25%)
Power Consumption: 5W
Input Voltage: 24V DC (15–30V range).
Response Time: ≤1 ms
Rated Load: 0.5A/channel, 24V DC
Resolution: 16-bit (±0.1% accuracy)
Accuracy: ±0.2% of full scale
encoder unit or 3 independant up/counter
2 threshold detections
counter preset
Max. frequency 50kHz
7 transistor outputs 24 V d.c. 300mA
4 binary inputs 24 V d.c.
Integral 5V, 15V, 24V power supply for encoder
24 VDC power supply
120 VAC power supply
230 VAC power supply
Voltage Range: 100–240 VAC
Frequency: 50/60 Hz
Voltage: 24 VDC
Current Rating: 10–20 A
Power Rating: 240–480 W
Temperature: -25°C to +70°C (-13°F to +158°F).
Humidity: 5–95% non-condensing.
Processing Capacity
Manages up to 15,000 I/O points
with a cycle time of ≤5 ms
1 GB RAM, 2 GB flash storage
Power Supply: 24 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F)
Current: 0–20 mA, 4–20 mA
Voltage: 0–10 V, ±10 V
Resistance: RTD, thermocouple
Power Supply: 24 V DC (±10%)
Power Consumption:2–5 W
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Humidity: 5–95% noncondensing.
Certifications: CE, UL, ATEX/IECEx
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing.
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing.
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
Sample intervals from 10 seconds to 60 min
Graphical browser-based log viewer
Sends logs by E-mail or FTP
Data is saved in Microsoft
Excel compatible CSV files.
SDCSDSL4
COMMUNICATION BOARD
DCS-LINK DRIVE-TO-DRIVE
DEDICATED TO THE DCS800
BASED ON CAN BUS.
THIS COMMUNICATION ADAPTER IS USED IN
12-PULSE OPERATION
AND COMMUNICATION /
CONTROL OFEXTERNAL FIELD SUPPLIES
DCF803-0035
THIS BOARD IS STANDARD IN AL
Series: SDCS
Operating Voltage: Typically 24V DC
Power Consumption: 5-10 W
Current Consumption: 200-400 mA
Operating Temperature Range: -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
Enclosure: Plastic
Mounting: Onto a standard mounting rail
Settings: Via drive interface (control panel)
Current Consumption: 70 mA at 24 V d.c
All materials are UL/CSA approved
Complies with EMC Standards EN 50081-2 and EN 50082-2
Power Supply :24 V DC
Module Type : NETA-01 V1.x
Mounting: On to a standard mounting rail
Settings : Through drive parameters and/or DIP switches
Current consumption: 80 mA at 24 V DC ±10%
3 digital inputs
3 + 1 digital outputs
DDCS communication link
+24 VDC (500 mA) to supply auxiliary equipment
isolated firing pulses
voltage measurements
Uc (DC busbar voltage)
Uac (supplyvoltage), synchronisation
heatsink temperature measurement
current measurement
earth fault current measurement
7-segment display
Input Signal Types: Voltage (0-10V, ±10V)
Accuracy: ±0.1% of full scale
Output Resolution: 12-bit or 16-bit
Output Load Resistance: 500Ω max
Voltage Supply Range: 24V DC nominal
Power Consumption: < 10 W
Operating Temperature:-20°C to +60°C
Storage Temperature:-40°C to +85°C
Differential push-pull HTL encoders
Single-ended push-pull HTL encoders
Open collector HTL encoders
Open emitter HTL encoders
+15 V DC ± 20% 200mA (max.)
+24 V DC ± 20% 200mA (max.)
Power Supply Voltage: 24 VDC ± 10%
Power Consumption: Typically less than 2 W
Resolver Excitation Voltage: 4-8 V RMS
Resolver Frequency Range: 2 kHz to 15 kHz
Input Channels: 1 Resolver input
Resolution: 12-bit to 16-bit resolution depending on configuration
Accuracy: ±0.05 degrees
Output voltages:
+5.5 V DC -5%, -8%, 180 mA
+24 V DC ±15%, 150 mA
Maximum cable length:
30 m with a 5 V encoder
(0.5 mm2 cable for power supply)
CH A, CH B, CH Z, CH U, CH V, CH W: RS-422/485,
Device used for controlling andprogramming
Can be attached directly to
the module ordoor of the cabinet
The keys are flat, labeled push-buttons
LCD display: 4x20 characters
Input Voltage: 24V DC
Current Consumption: 100-500mA
Power Rating: Usually around 5-10W
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
Operating Voltage: Typically 24V DC or 48V DC
Current Consumption: 5-10 A
Communication Interface: Ethernet/IP, Modbus
Operating Temperature Range: -20°C to 60°C (-4°F to 140°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
Input Voltage: 24 V DC (typical)
Operating Voltage Range: 18 - 32 V DC
Power Consumption: Typically 2.5 W
Isolation Voltage: 500 V AC
Input Type: Digital (24 V DC)
Digital: 3 kΩ
Digital: 0.5 A per channel
PHARPS32000000
DISCONTINUED BY MANUFACTURER
POWER SUPPLY MODULE
90-264 VAC INPUT
47-63 HZ
11.5 AMP
1150 VA
5/15/24 VDC OUTPUT
Tariff Code: 8504409530
Country of Origin: United States
Input: ±10 V DC, 4–20 mA
Power Supply:24 V DC
Power Consumption: ≤ 15 W
Isolation:1500 V AC
Operating Temperature:
-25°C to +70°C (-13°F to +158°F)
Humidity:
5–95% non-condensing
Channels:16 Digital Inputs
Voltage Levels:
Input：24 V DC (10–30 V DC range)
Output (Transistor): 24 V DC, ≤0.5 A per channel
Field-to-Logic Isolation: 1.5–2 kV
Operating Temperature: -25°C to +60°C (ambient)
Humidity: ≤95%, non-condensing
Power mounting unit
Mounting:Standard 483-mm (19-in.) cabinet
Storage and transport temperature
–40° to 85°C (–40° to 185°F)
Primary power:120/240 VAC, 24/48 VDC
Regulated DC voltages:+5 VDC, +15 VDC
Vibration:13.2 to 100 Hz
