Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Response Time:<1ms (input), <0.5ms (output)
Surge Protection:30V DC
Channels:16x digital
Voltage Range:24V DC (±10%)
Current Rating:5mA (min)
Isolation:1500V AC
Operation 0° to 55°C
Transportation/storage 40° to 85°C (*1)
Dust 0.3 mg/m3 or less
Resistance to corrosive gases
ANSI/ISA S71.04 Class G2 (Standard)
(ANSI/ISA S71.04 Class G3, option)
Resistance to vibration
Rated Voltage:690V AC
Current Rating:44A continuous
Short-Circuit Capacity:50kA (1s)
Power Connections:4-in/8-out configuration
Isolation Voltage:3000V AC
Input Voltage: 24 VDC
Power Tolerance: Operates within ±10%
Analog Signals: 4–20 mA or 0–10 V
Operating Temperature: -25°C to +70°C
Humidity: ≤95% non-condensing
Local Bus Power +5 VDC at 1.4 A
AmbientTemperature-40°C to +70°C
Shock 10g ½ Sinewave for 11msec
Vibration 1mm Peak to Peak from 2 to 13.2Hz
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985
AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing
INPUT VOLTAGE RANGE (REDUNDANT)24 V dc +5%, -10%
CONSUMPTION7 W (maximum) at 24 V dc
HEAT DISSIPATION7 W (maximum) at 24 V dc
Vibration0.75 g (5 to 200 Hz)
TEMPERATURE-40 to +70°C (-40 to +158°F)
RELATIVE HUMIDITY5 to 95% (noncondensing)
ALTITUDE-300 to +12,000 m (-1,000 to +40,000 ft)
PROFIBUS FC Standard Cable GP
bus cable 2-wire, shielded
special configuration for quick assembly
Delivery unit: max. 1000 m
minimum order quantity 20 m sold by the meter
Series:Series 90-70
Manufacturer:GE Fanuc; Emerson Automation (Current)
Part Number:IC697MDL750
Rated voltage:24 to 48 Volts DC
No of Channels:Thirty-Two (32)
No. of output groups:Four (4)
Channels per group:Eight (8)
Current draw:0.25 A
Required current:0.25 Amps
Wiring configuration:Positive Logic
Output voltage range:20-60 VDC
Number of outputs:32
On response time, maximum:1 ms
Off response time, maximum:1 ms
Output signal range:20 - 60 VDC
Isolation voltage:1500 Volts
RAM: 256 MB
Storage: 128 MB flash memory
for program and data storage
Expansion: Supports external memory expansion
Ethernet Ports: 2 x 10/100 Mbps Ethernet interfaces.
Voltage Range: 24 V DC (18 V to 34 V)
Power Consumption: Max 10W
8 A summation current per module
All outputs with single-channel diagnostics
for short circuit or overload
Extremely short cycle times
Outputs with short circuit protection
Integrated protection for switching inductances
Series:RX3i PacSystem
Part Number:IC695PMM335
Catalog:IC695
No. of Axes:4
No of Master axes:1
Backplane Support:Universal Support
Motion Path Planning:1ms
Number of Slots:1 (single slot)
Position Loop Update Rate:500μs
Controlled Axes/Module:4
FSSB Velocity Loop Update Rate:125μs
Motion Path Planning:1 ms
FSSB Torque Loop Update Rate:62.5μs
Power Consumption at 5 V:0.45 A
Servo Command Interface:Fiber Optic
Power Consumption at 3.3 V:1.1 A
Floating Point:Yes
Part Number:1606-XLS480E
Input Voltage:100…240V AC / 110...150V DC
Terminals Spring:Clamp
Output Power:480 W
Signal:DC-OK
Output Current:20 A (@ 24V) /17 A (@ 28V)
SIMATIC S7-200 SMART
Analog input
SM AR02 RTD
2x AI RTDmodules
SM AR02, AI RTD 2x16 bit
24 V DC Yes; -15 / +20 %
Current consumption, typ. 40 mA
from backplane bus 5 V DC, typ. 80 mA
Power loss, typ. 1.5 W
Input Voltage: 24V DC
Current Consumption: 1.5A typical
Isolation: 1500V AC channel-to-channel
Trip Contact Ratings:5A @ 30V DC resistive
Analog Inputs: 8 channels
Relay Outputs: 8 channels
Communication Ports: 2x Ethernet for diagnostics
