Memory:64MB DDR3, 16MB Flash
Operating Voltage:24V DC ±10%
Power Consumption:15W typical
Control Loop :62.5μs update rate
Position Resolution:24-bit (0.0001°)
Velocity Ripple:<0.02% of rated speed
Torque Control:±0.5% of rated torque
Motor Outputs:3-phase PWM (up to 20kHz)
Encoder Inputs:2x EnDat 2.2/SSI (26-bit)
Digital I/O:8x 24V DC inputs, 4x 0.5A outputs
Memory:32MB SDRAM
Control Loop Time:100μs (speed)
Digital I/O:12x 24V DC inputs
Supply Voltage:24V DC ±10%
Power Consumption:15W max
Isolation:2500V AC
Series:PACSystem RX3i
Part Number:IC694MDL930
No of Channels:Sixteen (16), individually isolated
Description:AC/DC Voltage Output Module
No. of channels:Eight (8), individually isolated
Operating Voltage:5 to 30 Volts DC or 5 to 250 Volts AC
Contact form:Normally Open (N.O.) Form A contacts
Output voltage range:5-250VAC / 5-30 VDC
Nominal output voltage:120-240 VAC; 24 VDC
Max. Backplane Draw:6.0 Milliamps
Minimum load:10 mA
Inrush Rating:5.0 Amps
Maximum inrush:5:00 AM
Relay contact life:150,000 -1,000,000 operations
SIMATIC S7-1500
mounting rail 160 mm (approx. 6.3 inch)
incl. grounding screw,
integrated DIN rail for mounting of
incidentals such as terminals
automatic circuitbreakers and relays
RM (Redundancy Module) to support
C200 redundancy
Input Power Supply 24V DC (nominal)
Operating Temperature:-10°C to 60°C (14°F to 140°F)
Storage Temperature:-40°C to 85°C (-40°F to 185°F)
Humidity Tolerance:5% to 95% non-condensing
06 0 ±100, 10 Hz (600 cpm)
01 Top Mount (no cable)
10 Circular; M10X1 stud
00 No Approvals
Sensitivity 20 mV/mm/s (500 mV/in/s)
Calibration Load 10 kΩ Terminal
"A" to "B" Outputtaken across pins "A" and "B"
SensitivityTemperatureCoefficient0.2%/°C
CoilResistance 1.25 kΩ ±5%
Locked CoilInductance 125 mH, typical
Operatingand StorageTemperature:
-29°C to +121°C(-20°F to +250°F)
Local Bus Power:12.6 VDC at 15 A
AmbientTemperature:-40°C to +70°C
Shock :10g ½ Sinewave for 11msec
Vibration:1mm Peak to Peak from 2 to 13.2Hz;
0.7g from 13.2 to 150Hz
AirborneContaminantsISA-S71.04 –1985
AirborneContaminants Class G3
Relative Humidity 5 to 95% Non-Condensing
Estimated 512 MB+ RAM
Modbus TCP/IP, Ethernet/IP
Analog (AI): ±10V DC, 4-20 mA
Digital (DI): 24V DC
Power Supply: 24V DC (±20%)
Power Consumption: < 10W
DIN-Rail mount
Configurable (USB)
Sensor type configurable
System cable length configurable
Measurement range configurable
Configurable sensor target material
