-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
G120 Standard Control Unit
SINAMICS G120 CONTROL UNIT
CU240E-2 E-TYPE SAFETY INTEGRATED
STO RS485-INTERFACE
USS-PROTOCOL 6DI, 3DO, 2AI, 2AO
MAX 1F-DI PTC/KTY INTERFACE
USB- AND SD/MMC-INTERFACE
PROTECTION IP20
AMBIENT TEMP 0 TO +50 DEG C
WITHOUT POWER MODULE AND PANEL
Driver Board
HV-IGBT modules: 1900A
Input Voltage Range:+24V DC
Isolation Voltage:min. 4000 V RMS
IGBT Voltage Monitoring:±5%
Gate Drivers Per Phase:2 channels
IGBT-TRANSISTOR MODULE
IGBT-TRANSISTOR MODULE
PRECHARGING RESISTOR 2 X 18 OHM
Voltage: 1500 V
DC Collector Current:160 A
Rated Pulse Current:320 A
Operating Junction Temperature:-40°C to +150°C
MEASUREMENT BOARD
Input Types: 4–20 mA
Resolution: 16-bit ADC
Power Supply: 24 V DC ±10%
Voltage/Current: ±0.05%
RTD/Thermocouple: ±0.1°C
Operating Temperature: -25°C to +70°C
Vibration: 2 g @ 10–150 Hz
Relative Humidity: ≤95% RH (non-condensing)
Isolated Analog Input Module
Input Channels: 8 or 16 channels
Channel-to-channel: 1500 V AC
Field-to-system: 2500 V AC
Current: 4–20 mA, 0–20 mA
Current: 4–20 mA, 0–20 mA
Power Supply: 24 V DC ±10%
Accuracy: ±0.05%
Current Transformer
CURRENT TRANSFORMER
2000 AMP
15-24VDC
AC Input Range: 0–2000 A AC
Overload Capacity: 130% of Ipn for 10 sec
DC Voltage or Current:4–20 mA (Two-Wire Loop)
Input Voltage: 15–24 V DC ±10%
Power Consumption: <2 W
SINAMICS DC LINK ADAPTER
SINAMICS DC link adapter set
for multi-tier configuration
Screw terminals 35-95 mm2
for all Line/Motor Modules
BUSBAR CURRENT TRANSFORMER
Primary Current (Ipn): Range 50–600 A
Secondary Current (Isn):1 A or 5 A
Frequency: 50/60 Hz
Insulation Voltage:720 V AC
Operating: -25°C to +60°C
Storage: -40°C to +70°C
PSB11-BOARD
PSB11-BOARD/R3 SIC
HP/MC - SINAMICS COMPONENTS (LD)
Link Voltage (DC): Supports 600/510–720 V D
Output Voltage (AC): Up to 480 V AC 3-phase
Continuous Motor Current: Up to 1,600 A
Peak Current: Short-term 2,500 A
Switching Freq: Up to 5–20 kHz
POWER CONTROLLER MODULE
POWER CONTROLLER MODULE
SIMOVERT MASTERDRIVES
47 AMP
3 PHASE
380-460V
Inverter Board
TDB10 BOARD 400V
TDB10 Trigger/Inverter Board
Line Voltage: 380–415 V AC (3-phase)
DC Link Voltage Output:up to 575 V DC
Voltage Supply: 24 V DC ±10%
Isolation: ≥2,500 V
Detection board
AC/DC DRIVE
SIMOVERT MASTERDRIVES
660-690 V AC OUTPUT
890-930 V DC INPUT
3 PH
23.6 KW
1400 AMP
IP00
RATING - 1300 KW
Inverter snubber Module
AC/DC DRIVE
SIMOVERT MASTERDRIVES
675-810 V DC INPUT
500-600 V AC OUTPUT
3 PH
31.7 KW
1200 AMP
IP00
RATING - 1700 KW
COMMUNICATION MODULE
COMMUNICATION MODULE
CBP2
MOTION / VECTOR CONTROL
PROFIBUS MODULE
VARNISHED
SIMOVERT MASTERDRIVES
Normalizing module
AC/DC DRIVE
SIMOVERT MASTERDRIVES
675-810 V DC INPUT
500-700 V AC OUTPUT
3 PH
27 KW
1100 AMP
IP00
IGBT-TRANSISTOR MODULE
SPARE PART
SIMOVERT MASTERDRIVES
IGBT-TRANSISTOR MODULE
BSM300GA170 DN2S
300A, 1700V
Pre-charging module
SIMOVERT Masterdrives
Pre-charging module
PCU for dev
47 and 72 A 380-460 V
3 AC 34 A and 46.5 A
500-575 V 3 AC
