Invensys

Terminal Block Connector Assembly

P0916SR0B
TERMINAL BLOCK CONNECTOR ASSEMBLY

Temperature Module

P0916JT
COMPRESSION TERM ASSEMBLY
FBM211
EXT POWERED (I/A PLANT)

COMPRESSION TERM ASSEMBLY

P0916JT
COMPRESSION TERM ASSEMBLY
FBM211
EXT POWERED (I/A PLANT)

INPUT MODULE

P0916KP0B
INPUT MODULE
NUMBER OF COMMUNICATION INPUTS: 16
NUMBER OF TERMINATIONS: 32 - SCREW
CABLE TYPE: 4
CABLE CONNECTION: 37 PIN [M] CONNECTION

Relay Output Module

Communication Protocol:Modbus TCP/IP, DeviceNet
Data Rate:Up to 1 Mbps
Power Consumption:L ess than 4W
Operating Temperature:-40C to +70°C
Mounting Type:Panel Mount

Analog Output Module

Points:4, commoned-return, DC-coupled
Output current range:
4–20 mA output, controlled
0–22 mA over-range
0 mA output capability (step function <2 mA)
Type:TMR
Resolution:12 bits
Diagnostic:Forced-switch diagnostic (FSD)
Over-range protection:36 V DC, continuous

Main Processor (UMP) Module

Power consumption: Typically 15-30W
Operates on 24V DC
Operating Temperature: 0°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing

Digital Relay Output Module

3636T
DIGITAL RELAY OUTPUT MODULE
32 POINT
2 AMP
125 VAC/DC
1900 VDC POINT ISOLATION
NON-TRIPLICATED

INPUT MODULE / ANALOG

Points:32, commoned
Nominal input current:4–20 mA DC
Operational current range:2–22 mA DC
Absolute maximum field voltage:33 V DC
Absolute maximum input current:50 mA DC
Input bandwidth (3dB):16 Hz
Source impedance:180 Ω
Resolution:12 bits
Absolute error:0.15% of full scale (20 mA)
Diagnostic:Force-to-value diagnostic (FVD)
Scan time:<1 ms for all 32 points

Main Processor Baseplate

Input Voltage: 24 VDC nominal 
Speed: High-speed TMR
Operating Temperature: 
-40°C to +70°C (-40°F to +158°F)

Panel Field Termination

Rated Voltage: 24V DC or 120V AC
Current Rating:1-10A
Wire Size Compatibility: 12 AWG to 24 AWG
Operating Temperature Range:  -10°C to +60°C
Storage Temperature Range: -20°C to +70°C

Termination Board

Input Type: Dry contact or Wet contact inputs
Wet contact inputs: Typically 24V DC
Power Supply: 24V DC ± 20% 
Power Consumption: Approximately 3W
Maximum Power Consumption: 3 watts
Operating Temperature Range: -40°C to +70°C
Storage Temperature Range: -40°C to +85°C
Relative Humidity: 5% to 95%, non-condensing

External Terminator

24 V DC nominal 
8, identical
2 A per point continuous
< 0.3 V @ 2 A

Digital Output Module

Points:16, commoned
Nominal output voltage:24 V DC
Operational voltage range:15–30 V DC
Absolute maximum output voltage:33 V DC
Absolute maximum reverse input voltage:–0.6 V DC
Leakage to load (Off-state):<1 mA
On-state voltage drop:<1 V DC @ 1.5 A
Loop-back scan time:<1 ms for all 16 points

COMMUNICATION MODULE

COMMUNICATION MODULE
NET 1 CONNECTION
NET 2 CONNECTION
2 COMMUNICATION PORTS
LED INDICATORS

DIN Rail Mounted Power Supply

Wide range of AC and DC input voltages
Power factor correction
Dual stage current limiting
Overvoltage shut down circuitry
Transformer isolated 24 V DC output
Class 1, DIV 2, Zone 2 applications
G3 rating for harsh environments
Power for external field devices
Convection cooling (no fans)
Gasketed and sealed housing
Horizontal or vertical DIN rail mounting
Holes for bracket or wall mounting
Relay (form C) status alarm output

Pneumatic Controller

Analog Input: 1–5V DC, 4–20 mA
Analog Output: 4–20 mA or 0–10V DC
Voltage: 120/240V AC ±10% (50/60 Hz)
Power Consumption: 5W typical
Operating Temperature: -20°C to +60°C (-4°F to +140°F)
Humidity: 0–95% non-condensing