Invensys

Input Module

Input16 group isolated and independent channels
Input Range (each channel)0 to 20.4 mA DC (each channel current limited to33 mA)
Accuracy (includes linearity)±0.03% of span
Accuracy temperature coefficient: ±50 ppm/° C
Common Mode Rejection>100 db at 50 or 60 Hz
Normal Mode Rejection>35 db at 50 or 60 Hz
Input Channel Impedance61.9 Ω nominal
INPUT VOLTAGE RANGE (REDUNDANT)24 V DC +5%, -10%
CONSUMPTION7 W (maximum) at 24 V DC11 W (maximum) at 24 V DC with all inputs at20.4 mA (internal power)

Analog Input Baseplate

Fault current130 mA,
typical200 mA, maximum
Current Input: 4–20 mA, 0–20 mA.
Voltage Input: 0–10 V DC, ±10 V DC
Resolution:16-bit resolution
Accuracy:±0.1% of full scale
Channel-to-channel isolation: 1500 V AC/DC
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)

POWER MODULE

Support for 10 Mbps Ethernet trunk Fieldbus
Support for DIN rail mounted FBMs
Optional redundancy
Compact, rugged design
Easy to install and configure

Power Supply High Density Module

Chassis Type:Main/Expansion/RXM
Nominal Voltage:24 VDC
Input VAC @ 47-63 Hz:n/a
Input VDC:22-31
Fuse Rating and Type:15 amps, time-delay
Output Hold Time:2.8 ms minimum
Diagnostic Indicators:PASS, FAULT, ALARM, TEMP,BAT LOW

High Density Main Chassis

8111
CHASSIS
POWER SUPPLY RACK
NO CARDS INSTALLED

Fieldbus Communication Module

INPUT VOLTAGE RANGE (REDUNDANT)24 V dc +5%, -10%
CONSUMPTION7 W (maximum) at 24 V dc
HEAT DISSIPATION7 W (maximum) at 24 V dc
Vibration0.75 g (5 to 200 Hz)
TEMPERATURE-40 to +70°C (-40 to +158°F)
RELATIVE HUMIDITY5 to 95% (noncondensing)
ALTITUDE-300 to +12,000 m (-1,000 to +40,000 ft)

Network Communication Module

Input Voltage: 24 VDC
ower Consumption: 5 W
Modbus TCP/IP
Ethernet/IP
OPC (as applicable)