ALL MANUFACTURERS

Analog I/O module

SIMATIC S7-1500
Analog I/O modules
Fully modular connection
Connection module
at DC / rated value 24 V
rated value 50 V
at DC / maximum 50 V
current / rated value 1 A
during operation 0 ... 60 °C
during storage -40 ... +70 °C

SIMATIC S7-1500
mounting rail 245 mm (approx. 9.6 inch)
incl. grounding screw
integrated DIN rail for mounting of 
incidentals such as terminals
automatic circuit breakers and relays

CPU MODULE

SIMATIC S7-1500
CPU 1511-1 PN
central processing unit with work 
memory 300 KB for program 
and 1.5 MB for data, 1st interface
PROFINET IRT with 2-port switch
25 ns bit performance
SIMATIC Memory Card 

Memory card

SIMATIC S7
memory cards for 
S7-1x00 CPU/SINAMICS
3, 3V Flash
12 MB

SIMATIC S7-200 SMART
CPU ST30, Standard CPU
DC/DC/DC,onboard 
I/O: 18 DI 24 V DC; 12 DO 24 V DC
Power supply: DC20.4-28.8V DC
Program/data memory 30 KB

Digital output module

Product type designation DQ 8x24VDC/2A HF
HW functional status FS03
Firmware version V2.2.0
Rated value (DC) 24 V
permissible range, lower limit (DC) 19.2 V
permissible range, upper limit (DC) 28.8 V
Current consumption, max. 40 mA
Rated value (DC) 24 V
Power available from the backplane bus 0.9 W

Analog input module

SIMATIC S7-1500 Analog input module
AI 8xU/I/R/RTD BA
16 bit resolution,Accuracy 0.5%, 8 channels in groups of 8
Common mode voltage 4 V DC,Diagnostics
Hardware interrupts; Delivery including infeed element
shield bracketand shield terminal
Front connector (screw terminals or push-in) 
to be orderedseparately

SERVO DRIVE

SERVO DRIVE
18 VDC INPUT
30 VDC
2 AMP MAX PER CHANNEL

CPU module

Power supply:24 V DC (-15%/+20%)
NOVRAM:128 kB
Max. power consumption:27 W
Weight:approx. 1165 g
Dimensions (W x H x D):144 mm x 99 mm x 91 mm
Relative humidity:95%, no condensation
Operating/storage temperature:-25…+60°C/-40…+85°C

Light PCI Motion controller

Control Cycle Time: 62.5 µs
Encoder Frequency: Up to 10 MHz
Voltage: 5V DC (from PCI bus)
Current Consumption: Typically < 1A
Operating Temperature: 0°C to 45°C
Humidity: 5% to 90% non-condensing
Storage Temperature: -20°C to 70°C

ohne Mechanik PCI Board

Type: PCI Board 
Bus Speed: Typically PCI 32-bit
Operating Voltage: 3.3V or 5V

FLOW MONITOR SCALE DISPLAY

For liquid flow: 0.5 to 10,000 l/h
For gas flow: 1 to 1000 Nm³/h
Accuracy: Typically ± 1%
Analog Outputs:4-20 mA output
Operating Temperature:Typically -20°C to 60°C
Storage Temperature:Typically -20°C to 80°C

Accessories

Headers & Wire Housings 
NANO-FIT TPA V0 BLK 3 CKT
Product:Accessories
Number of Positions:3 Position
Pitch:2.5 mm (0.098 in)
Tradename:Nano-Fit
Minimum Operating Temperature:- 40 C
Maximum Operating Temperature: + 115 C

CPU board

P4080 1.5 GHz 4-Core
4 GByte RAM with ECC
1 GByte NAND Flash

Switching Supplies

Product: Switching Supplies
Input Type:1-Phase / Single Phase
Output Power: 240 W
Number of Outputs: 1 Output
Output Voltage-Channel 1:24 V
Output Current-Channel 1:10 A
Isolation Voltage:3 kVAC
Maximum Operating Temperature: + 70 C
Minimum Operating Temperature: - 40 C

Ethernet Switch

Switching Capacity: 32 Gbps
Forwarding Rate: 23.8 Mpps
MAC Address Table: 8K entries
Jumbo Frame Support: Yes (up to 9KB)
VLAN: Supports up to 256 VLANs
Power Supply Voltage: 12-48 VDC
Power Consumption: 20 W (typical)
Operating Temperature:-40°C to +75°C (-40°F to +167°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)

PROCESSOR MODULE

SCP461-E1 
PROCESSOR MODULE
ENHANCED RFI
ISA STANDARD G3
FOR SSC60S
SSC60D

Optical ESB Bus RepeaterModule

Function: ESB Bus optical transport function
Connection method: Star type connection 
Chain type connection 
Available for both star and chain type connection.
Number of connecting stage: Maximum two
Transmission distance: Maximum 5 km (total two stages) 
In case of Vnet/IP system with the R1.03 or later, 
the total distance of two stagesis maximum 10 km.
Current consumption: 0.5 A

Current Output Module

Number of output channels 8 channels, module isolation
Rated output range 4 to 20 mA
Maximum range of guaranteed precision 1.25 to 23 mA
Output range 1.25 to 23 mA
Allowable load resistance @ rated range 230 to 600 Ω
Accuracy ±48 µA
Data update frequency 40 ms
Temperature drift ±16 µA/10 ºC
Withstand voltage 1.5 kV AC between output signal and system for 1 minute

Digital output module

Digital output module 
8-channel
24 V DC
module isolation

Output Module

Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
External power supply 24 V DC +20 %/–10 %
Output format Current source
Maximum load current 0.6 A/output line 
Minimum load current 35 mA
Load resistance range 40 to 685 Ω
Output response time 30 ms maximum

Output Module

Number of outputs 4-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 10 A minimum
External power supply 24 V DC +20 %/–10 %
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 2 A/output line
Minimum load current 100 mA
Load resistance range 12 to 240 Ω)
Maximum lamp load (*1) 1 A/output line

Output Module

Number of outputs 8-channel, module isolation
Output voltage 24 V DC
Output voltage drop 1 V maximum
External power supply rating 24 V DC, 5 A minimum
Maximum leak current at output offstatus 1.6 mA
Output format Current source
Maximum load current 0.6 A/output line
Minimum load current 35 mA
Load resistance range 40 to 685 Ω 
Output response time 30 ms maximum

Input Module

Number of inputs 16-channel, module isolation
Input current 6 mA ± 20 %
Contact rating 24 V DC +20 % / -10 %
External power supply 24 V DC +20 % / -10 % 
Input response time 40 ms maximum
Withstand voltage (*1) (*2) 2 kV AC between input signal and system for 1 minute, 16-input line collectivelyconnected