ALL MANUFACTURERS

MicroLogix 1200 Memory Module

1762MM1
MEMORY MODULE
MICROLOGIX 1200
8K-WORD
PROGRAM & DATA BACK-UP
PROGRAM COMPARE
DATA FILE DOWNLOAD PROTECTION
WRITE PROTECTION
REMOVE/INSERT UNDER POWER

Relay Output Terminal Board

Input Voltage: 24 VDC (nominal)
Output Voltage: 24 VDC (typically)
Output Current: 1-2A per relay
Relay Type: SPDT (Single Pole Double Throw) relays
Number of Relays: 8 (Typically, each with individual output terminals)
Relay Contact Rating:
Max Switching Voltage: 250 VAC or 30 VDC
Max Switching Current: 5A (AC or DC)
Max Switching Power: 120VA (AC) or 120W (DC)

Analog Input/Output Terminal Board

Manufacturer:General Electric
Series:Mark VIeS
Part Number:IS200TBAIS1C
Functional Acronym:TBAI
Functional Description:Analog Input/Output Terminal Board
PCB Coating:S-style PCB coating

Printed circuit board

Input Power Voltage: 24V DC (±15%)
Power Consumption: <10W
Digital I/O: 24V DC logic levels for start/stop
Analog Inputs: 0–10V or 4–20mA
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing (IEC 60721-3-3).
Vibration Resistance: ≤5.9 m/s²

CONTROL GATE TRIGGER BOARD

Isolation Voltage: ≥2500V AC
Gate Voltage: +15V/-8V typical
Peak Output Current: ≤10A 
Auxiliary Voltage: 24V DC (±10%) 
Temperature: -10°C to +50°C (derating above 40°C)
Humidity: <95% non-condensing

INVERTER CONTROL POWER BOARD

Voltage: 380–690V AC (±10%), 3-phase
Frequency: 50/60 Hz.
Nominal: 930V DC
Control Circuit Voltage: 24V DC (±15%)
Analog inputs :0–10V, 4–20mA
Temperature: -10°C to +50°C (derate 2% per °C above 40°C)
Humidity: <95% non-condensing

INVERTER CONTROL POWER BOARD

Rated Voltage: 3-phase AC 380–690V
Frequency: 50/60 Hz
Nominal: 930V DC
Temperature: -10°C to +50°C
Humidity: ≤95% non-condensing
Altitude: ≤1000m

Drive Board

Rated Voltage: 520–690V AC
DC Bus Voltage: ~900–950V DC
Frequency Range: 0–400 Hz 
Operating Temperature: -10°C to +50°C
Storage Temperature: -40°C to +70°C.
Humidity: ≤95% non-condensing.
Vibration Resistance: ≤5.9 m/s²

Drive Board

Nominal Voltage: 690V AC (±10%)
Frequency: 50/60 Hz
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing.
Altitude: <1000m without derating.
Signaling: I/O integration for drive control 

Frequency converter 690V dedicated power board

Nominal Voltage: 690V AC (±10%)
Frequency: 50/60 Hz
Temperature: -10°C to +50°C (derating above 40°C).
Humidity: <95% non-condensing.
Altitude: <1000m without derating.
Signaling: I/O integration for drive control 

PCB NODE BOARD

Operating Voltage: 24V DC (±5%)
Power Consumption: ≤15W
Operating Temperature: 0°C to +55°C (32°F to 131°F)
Humidity Tolerance: 10–90% non-condensing
Data Rate: Up to 100 Mbps
Memory Flash: 512 MB–1 GB
Memory RAM: 256–512 MB
Digital I/O: 16–24 channels
Analog Inputs: 4–8 channels 

Pressductor PillowBlock Load cells

Rated Load: Up to 1000 kN
Overload Protection: 200% of rated capacity
Accuracy: ±0.1% FS (full-scale linearity).
Output Signal Analog: 4–20 mA (2-wire), ±10V DC
Output Signal Digital: Optional Profibus DP, Modbus RTU 
Excitation Voltage: 10–30V DC
Frequency Response: ≤1 kHz 

Pressductor PillowBlock Load cells

Compression/Tension: Up to 500 kN 
Overload Protection: 150% of rated capacity
Accuracy: ±0.1% of full scale (FS) linearity error
Output Signal :Analog: 4–20 mA or ±10V DC
Rated Excitation Voltage: 10–15V DC
Bridge Resistance: 350 Ω ±1%.
Operating Temperature: 
-40°C to +120°C (-40°F to +248°F)

ANALOG MODULE

Analog Inputs: 8–16 channels
Voltage Ranges: ±10V, 0–10V, 1–5V
Current Ranges: 4–20 mA, 0–20 mA
Analog Outputs: 4–8 channels
Voltage: 0–10V, ±10V
Current: 4–20 mA
Resolution:16-bit ADC/DAC

V-NET Coupler Module

Input Voltage: 24 V DC
Power Consumption: Estimated 10–15 W
Operating Temperature: -10°C to +55°C (14°F to 131°F)
Humidity: 5–95% RH (non-condensing)

Vnet/IP COMMUNICATION MODULE

Power Supply:24 V DC
Power Consumption:≤5 W
Operating Temp.:-20°C to +70°C
Humidity:10–90% RH (non-condensing)

POWER SUPPLY MODULE

PW44150
POWER SUPPLY MODULE
FOR V NET POWER
1.4AMP
100-120VAC
50/60HZ

Coupler Module

Impedance: 100 Ω ±15%
Power Supply Input: 24V DC (±10%) 
Power Consumption: ≤5W
Operating Temperature: -40°C to +70°C (-40°F to +158°F)
Humidity: 5–95% non-condensing

Hlai/sti galvanic isolator module

Description : HLAI/STI FTA, GI/IS MC-GAIH13
CE compliant, conformally coated
Redundancy
Channels : 16
Galvanically Isolated
Terminals : Compression
Size B : 12 inches (307 mm)

ControlNet adapter module

Module Type:I/O Adaptor Module
Power Dissipation:5 Watts
Backplane Current (at 5 Volts):1.0 Amperes
Thermal Dissipation:17.06 BTU/hr
Upper Connector Keying:54-56
Lower Connector Keying:16-18
Operating Temperature:32-140 F (0-60 C)
Storage Temperature:-40-185 F (-40-85 C)

Power supply

Input Voltage AC Input: 100–240V AC (±10%), 50/60 Hz
Current: 10A
Efficiency: ≥85% (typical)
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Storage Temperature: -40°C to +85°C (-40°F to +185°F).
Certifications: CE, UL, IEC 61131-2, RoHS

PROBE LOW TEMP 20FT PH

Measuring Range: 0–14 pH.
Process Fluid: 0°C to 50°C (32°F to 122°F)
Response Time: ≤30 seconds
Cable: 20 feet shielded, UV-resistant
Pressure Rating: ≤5 bar (72.5 psi) 
Calibration: 2–3 point calibration

15-inch TFT Display

2711 PanelView Plus 6 Terminal
1500 Model, Keypad/Touch
Color, Standard Communication - Ethernet & RS-232
AC Input, Windows CE 6.0 with Extended Features

Analog Input Module

ANALOG INPUT MODULE
24VDC
16 CHANNEL
Absolute accuracy
Correct conversion over the full range
Crosstalk between inputs
Channel input filters
Internal supply voltages

3300 XL 8 mm Proximity Probes

3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
20 2.0 meters (6.6 feet)
12 Miniature coaxial ClickLocconnector
FluidLoc cable
05 CSA, ATEX, IECEx  Approvals