-
Please try to be as accurate as possible with your search.
-
We can quote you on 1000s of specialist parts, even if they are not listed on our website.
-
We can't find any results for “”.
ADVANCED MICROCONTROLLER
ADVANCED MICROCONTROLLER
18-36 VDC
ETHERNET CONNECTION
VGA CONNECTION
Control Board
Operating Voltage: 24V DC
Temperature Range: -20°C to +60°C
Humidity Range: 5% to 95%, non-condensing.
POWER SUPPLY
PHASES:3; PN(KW):0,648
UPRI(V):575(600)-500-460(480)- 400(415)-230(240)-200
USEC(V DC):24
ISEC(A DC):27/32,5 (60/40 CEL)
F(HZ):50...60
VECTOR GR./SHIELD WNG.:II0 /0
PROTECTION CL.:I; TA/ISOKL:60 /B
W(%):4,2; IP00
TYPE OF TERMINALS:SCREW CONNECTION
INSTALLATION:SCREW;
EN 61558-2-6, EN61131-2 >UL
CSA-RECOGNIZED
SAFETY ISOLATING TRANSFORMER
Drive Controller
DC Bus Nominal Voltage:DC 300V
Nature of Firmware:Standard
Rated Current:12A
Multi interface, general purpose
PROFINET fieldbus module
Product or component type:Communication module
Product compatibility:Lexium 32M
Accessory / separate part destination:Servo drive
Number of addresses:256
Electrical connection:2 connectors RJ45
4 LEDs (green/red) for communication status
Servo motor
Range compatibility:PacDrive 3
Device short name:SH3.....P
Product or component type:Servo motor
Maximum mechanical speed:8000 rpm
rated supply voltage:115...480 V
Network number of phases:Three phase
Continuous stall torque:1.25 N.m at 115...480 V three phase
Continuous power:690 W
Maximum current Irms:5.7 A
Servo motor
Maximum mechanical speed 8000 rpm
rated supply voltage 115...480 V
Continuous stall current 2.9 A
Continuous power 1130 W
Speed feedback resolution 128 periods
Torque constant 0.7 N.m/A at 120 °C
Back emf constant 48 V/krpm at 20 °C
Maximum axial force Fa 80 N
ACCELEROMETER
Acceleration Range: ±2g, ±5g, ±10g, or ±50g
Voltage output, typically 0-5V or 0-10V
Supply Voltage: 5V DC or 12V DC
Operating Temperature: -40°C to +85°C
Analog Input Module
Universal Input Output IOTA
Input Channels 1 16 Channels
Common Mode Voltage, dc to 60 Hz -6 to +5 V peak
A/D Converter Resolution 16 bits
Normal Mode Rejection Ratio, at 60 Hz 19 dB
Normal Mode Filter Response Single-pole RC, -3 dB @ 6.5 Hz
Input Impedance (voltage inputs) > 10 M Ω powered
Input Scan Rate 50 ms
High-Speed Network Communication Modules
Supports fiber-optic medium
NFPA Class B or Class A operation
Data is immune to all environmental noise
Optical isolation prevents ground loops
High-Speed NFN fiber-optic medium
Fiber type: 62.5/125 micrometers (multi-mode);
50/125 micrometers (multimode),
or 9/125 micrometers (single mode)
Maximum attenuation: 10 dB with 62.5/125 μm cable, 6
CONTROL OPERATING UNIT
SIMOVERT
MASTERDRIVESVECTOR CONTROL
MOTION CONTROLOPERATING UNIT
W. INTEGRATED MEMORY OP 1S
CENTRAL PROCESSING UNIT
Module Type:Central Processing Unit
Number of Slots:1 (Single slot)
Battery-backed memory: 1 Mbyte
Number of Points:12K discrete inputs and outputs
Serial Ports:1 (RS422/485 compatible)
Current Required:3.3 Amps nominal
Extender Cable
8-Wide I/O
Interface Carrier
with Carrier Shield Bar
Operating temperature-40 to 70°C (-40 to 158°F)
Storage temperature-40 to 85°C (-40 to 185°F)
Relative humidity5 to 95%, non-condensing
Extender Cable
8-Wide I/O
Interface Carrier with
Carrier Shield Bar
Single Enhanced
Carrier Extender Cable
and Redundant SISNet Coax Cables
Cables are 1.2m
Extender Cable
8-Wide I/O
Interface Carrier
with Carrier Shield Bar and Single
EnhancedCarrier Extender Cable.
Cable is 1.2m
