ALL MANUFACTURERS

ENGINE MANAGEMENT SYSTEM

ENGINE MANAGEMENT SYSTEM
Pentium® 133 MHz PC
32 MB of RAM
DOS 6.22, Windows® 95
DIGITAL
100 HZ MAX. FREQUENCY
5 V OUTPUT
RS-232 COMMUNICATION PORT

OVERSPEED MONITOR

LOW SPEED : 1677 Hz
OVERS SPEED : 12077 Hz
INPUT POWER : 24V DC 50mA
RELAY CONTACTS : 30V DC 2A
GROUPS A,B,C,D T5 -20'C TO +85'C

General Purpose Equipment Monitor

01 110 to 220 Vac @ 50 to 60 Hz (externalsupply)
00 No display
03 Fiberglass NEMA 4X/IP66 WP housingwith window in door
00 None
00 None
EQUIPMENT MONITOR
GENERAL PURPOSE
1900/65A SERIES

Embedded Controller Module

Product Type: PAMC Acoustic Monitor (Processor)
Software: ControlST V04.03.18C
Relative humidity: 5% to 95%, no-condensing
Power Requirements +32 V dc to 18 V dc
Microprocessor: Freescale Power PC (Power QUICC II PRO 667 MHz)
Memory: 256 MB DDR SDRAMs

Processor Module

Freescale™ QorIQ P4080 – 
8-core CPU @ 1.5GHz
Serial Rapid IO, PCIe 
and 1/10GbE fabrics
Fast dual-channel memory 
(up to 8 GB RAM with ECC)
Useable in managed (with MCH) 
and unmanaged (without MCH) systems

Drive Board

24V DC for logic power
230V to 690V AC
Approximately 10-20W
0 Hz to 200 Hz
Standard range: -10°C to +50°C
Storage Temperature:-40°C to +85°C
5% to 95% RH, non-condensing

Operator Interface

PC BOARD
DISPLAY CONTROL BOARD
DIGITAL DISPLAY

I/O Communication

Modbus RTU/ASCII or Modbus TCP
Ethernet/IP
Profibus or Profinet
RS-232/RS-485 serial communication

Flowmeter MASSFLO

FLOWMETER MASSFLO 
MASS 3000 
115/230VAC/ENCLO-IP00
Gas Flow: 0.01 to 1000 kg/h
Liquid Flow: 0.1 to 1000 kg/h
Typical Accuracy: accuracy of ±0.5% of readin
Standard Temperature Range: -40°C to +150°C
Operating Pressure:0 to 100 bar
Analog Output:4-20 mA
Voltage Range: 24 V DC

Transmitter

R/I TRANSMITTER 24VDC 0-20MA
Input for Pt100, Ni100 or Ohm
Sensor cable compensation
Linearised analogue output
24 VDC or universally supplied
Individual 0 and 100% adjustment
DIN rail mounting on a standard 11-pole relay socket

Mini Temperature Transmitter

Configuration: Non-isolated thermocouple input
Linear range: 4 to 20 mAdc
Current Output limits: <2 to >40 mA (open TC)
Compliance (supply-voltage): 8 to 50 Vdc
Reverse polarity protection: 350 V peak
Maximum loop resistance: (Supply Voltage - 8V)/20 mA

INDUSTRIAL COMPUTER

INDUSTRIAL COMPUTER
18-32 VDC
12 AMP
RATED FOR NEMA TYPES 1/12/13/4X

Bus Control Unit

AC Power:100-240 V AC.
Max. Monitor Connections: 4 indoor monitors
Power Consumption:20-40W 
Operating Temperature:
Typically, 0°C to 40°C (32°F to 104°F).
Humidity: 
Typically up to 80% relative humidity

Variable speed drive

Range of Product:Altivar 312
Motor power kW:0.37 kW
Maximum Horse Power Rating:0.5 hp
Supply frequency:50...60 Hz - 5...5 %
EMC filter:Integrated
Apparent power:1 kVA
Maximum transient current:5 A 60 s
Power dissipation in W:41 W at nominal load
Speed range:1…50

CPU CARD

Processor Model:  PowerPC 600 series 
Clock Speed: 200 MHz and 500 MHz
Memory Capacity: 64 MB to 1 GB 
Memory Interface: 32-bit or 64-bit
Ethernet: 10/100/1000 Mbp
Input Voltage:  5 V to 12 V DC

VVP-Board Coated

PC BOARD
OVVP-BOARD COATED
UB C717 BE101

Sample Gas Feed Unit

In operation: +5 to +45 °C
Storage and transport: –25 to +60 °C 
 75 % year-round average
Input voltage 230 V AC or 115 V AC, 50 Hz or 60 Hz 
Power consumption max. 185 VA 
Sample gas pressure pabs = 70 to 105 kPa (0.7 to 1.05 bar) 
Sample gas inlet temperature +10 to +50°C 

Radio

Frequency coverage:136–174MHz 
Number of channels:Max. 128 Ch/ 8 zones
Channel spacing:12.5/25kHz
Type of emission:16K0F3E, 11K0F3E
Current drain:10.0A
Max. audio:0.7A
Stand-by:250mA

DUPOLICATES ENCODER OUTPUTS

DUPOLICATES ENCODER OUTPUTS
4-26 VDC INPUT SIGNAL VOLTAGE
2 ISOLATED LINE DRIVER OUTPUT SETS
150 MA MAX PER CHANNEL
5-26 VDC SUPPLY
(757-2003-01)

Analog Plug-in Module

Part Number/Catalog No.:2080-IF2
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:2
Data Range:0-65535
Repeatability:+/- 0.1%
Update Time:180ms per Enabled Channel
Operating Altitude:2000m

Analog Plug-in Module

Part Number/Catalog No.:2080-IF4
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:4
Analog Normal Operating Voltage Range:0-10V DC
Analog Normal Operating Current Range:0-20mA
Data Range:0-65535
Repeatability:+/- 0.1%

Analog input and output module

Part Number/Catalog No.:2080-OF2
Product Type:Analog Plug-in Module
Number of Single Ended Outputs:2
Analog Normal Operating Voltage Range:10V DC
Repeatability:+/- 0.1%

Programmable control module

Series:Micro870
Part Number:2080-L70E-24QBB
Product Type:Programmable Controller
CONTROLLER
PROGRAMMABLE
MICRO 820
12 INPUTS
24 VOLT DC
8 OUTPUTS: 7 RELAY AND 1 ANALOG
0 - 10 VOLT DC
4 ANALOG INPUTS
0 - 10 VOLT DC INPUT
SHARED WITH DC INPUTS
FIXED TERMINALS

Programmable Controller

Product Family:Micro 800
No. of Outputs:Seven (7) Relay outputs;
No. of Analog outputs:One (1) 0-10VDC
Plug-in slots:2
Program: Steps (or instructions):10Ksteps
Product Type Programmable Controller
Inputs:12(24V DC)
Outputs:7(Relay); 1 (Analog Out)

Circuit board

Input Voltage:  
24V DC, or 110V/220V AC
Operating Temperature: 
-10°C to +60°C