ALL MANUFACTURERS

Inverter Power Unit

Perfect Harmony Medium voltage drive
PERFECT HARMONY power cell G4 Cell 200A, 750 V.
Current: 200 A
Voltage (DC Link): 750 V DC 
Power: 150 kW 
Frequency: Up to 3 kHz 
Dead-Time Compensation: <1 μs IGBT offset
Auxiliary Power Input:24 V DC

Robicon G4 Power CELL

Robicon G4 Power CELL, 140A, 750V
Perfect Harmony Medium voltage drive
LDZ10500424.140
Voltage (DC Link): 750 V DC ±10% 
Rated Current (Continuous): 140 A
Power Rating: 105 kW
Operating Temp.: Max cell temperature ≤85°C
Capacitors: 12,000 µF ±20% 900 V DC

CPU BOARD

CPU BOARD ELECTRONIC MODULE 
FOR CONVERTER
RAM ≤ 256 MB 
Flash ≤ 512 MB
Digital I/O:24 VDC, ±10%
Analog Inputs: 0–10 V/4–20 mA
Input Voltage: 24 VDC ±10%
Isolation: Reinforced (3000 VAC) 
Max Power Draw: 20–50 W

REPLACEMENT IPD CARD

SINAMICS S120 
Replacement IPD card 
for air-cooled Basic Line Module 
710kW 380-480V 3AC/1500A

FREQUENCY DRIVE POWER BOARD

Range: 320–1244 VDC
Current: 0.2–0.7 A
DC Input: 24 VDC
Output Power: 180 W
Efficiency: Likely ≥85%
Operating Ambient: 0°C to +50°C
Isolation: Input-to-output ≥2500–3000 VAC
Voltage Matching: 24 VDC

GEN5 VFD Power Cell

GEN5 VFD Power Cell 
GH180 Medium Voltage Drives
Voltage Class:3.3 kV
DC Link Voltage: Standard 750 V DC
L-L Nominal:3.3 kV–6.9 kV
Continuous Output Current: 240–300 A 

Pressure Transmitter

SITRANS P320 Pressure transmitter
7Mf0300-1Qf01-5Sf2-z 
Pressure Range: Adjustable span
Accuracy: ±0.075% to ±0.25%
Response Time: ≤30 ms
Output Signal: 4–20 mA HART
Supply Voltage: 10.5–45 V DC

CPU Module

Processor Type: 32-bit or 64-bit RISC-based
Program Memory: 512 KB–8 MB
Data Memory: 64 KB–2 MB
Execution Speed: ~0.1–0.3 μs 
Analog I/O:4–20 mA or ±10 V inputs
Voltage Rating: 24 VDC (±15%)
Power Consumption: 10–30 W
Operating Temperature: 0°C to 55°C (32°F to 131°F)
Storage Temperature: -25°C to 75°C (-13°F to 167°F)

3300 NSv Proximity Probes

330901 3300 NSv Probe
1/4-28 UNF thread,without armor
Minimum unthreaded length: 0.4 in
Minimum case length:  3.5 in
50 5.0 meters (16.4 feet）
01Miniature coaxial ClickLoc connector
with connector protector, standardcable
00 Not required

3300 XL 11 mm Proximity Probes

330703 3300 XL 11 mm Probe
M14 x 1.5 thread,without armor
Minimum unthreaded length:0 mm
Minimum length:40 mm
10 1.0 meter (3.3 feet)
01Miniature coaxial ClickLocconnector 
with connectorprotector, standard cable
05 Multiple Approvals

3300 XL 8 mm Proximity Probes

330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 3.0 in
10 1.0 meter (3.3 feet) 
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

3300 XL 8 mm Proximity Probes

330101 3300 XL 8 mm Probe
3/8-24 UNFthread, without armor
Minimum unthreaded length: 0.0 in
Minimum case length: 3.5 in
10 1.0 meter (3.3 feet)
02 Miniature coaxial ClickLocconnector
standard cable
00 Not required

Interconnect Cable

3-conductor shielded
22 AWG(0.5 mm2) cable
with 3-socketplug at one end
terminal lugs atthe other end
Minimum lengthof 2.0 ft (0.6 m)
maximumlength of 99 ft (30 m)

Velomitor CT Velocity Transducer

08 Plate Stud 3/8-in 24 to 1/2-in 20
00 MIL-C-5015 connection interface
00 No Approvals
Velomitor CT Velocity Transducer 

Standard Interconnect Cable

3-conductor shielded 
22 AWG (0.5 mm2) cable 
with 3-socketplug at one end
terminal lugs at the other end
Minimum lengthof 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)

3300 XL Standard Extension Cable

045 4.5 meters (14.8 feet)
11 Armored FluidLoc cable
05 CSA, ATEX, IECEx  Approvals

3300 XL 8 mm Proximity Probes

330102 3300 XL 8 mm Probe
3/8-24 UNFthread, with armor
Minimum unthreaded length: 0.0 in
Minimum case length: 1.2 in
05 0.5 meter (1.6 feet)
02 Miniature coaxial ClickLocconnector 
standard cable
05 CSA, ATEX, IECEx  Approvals

Perfect Harmony Medium voltage drive

Voltage Class: Medium Voltage
Series: Perfect Harmony GH/VFD 180
Power Range: Up to 50–100 MW 
Input Voltage 50/60 Hz, 3-phase
Output Voltage:0–60 Hz variable
Output Current (max):150–3500 A 

Control panel

SINAMICS PERFECT HARMONY GH180 Drives CCB
Communication Interfaces:Fiber-optic loops
Input/Output:24-bit I/O
Power Supply:24 V DC (±20%) 
Ambient Temp.:0°C – +50°C

Power unit fuses

DC link/integrated power module
Input rectifiers
Output IGBTs in drives
Voltage Rating:690–1000 VDC
Current Rating (Cont.):450–700 A 
Interrupting Capacity:≥100–150 kA

CELL WITH SUBMODULE

Series: Innomotics G5 Drive
Function: Power Submodule for MV Drive Systems
Current Rating (Cont.):45 A 
Voltage Rating:750 V DC
Overload Capacity:Up to 150% current for 60 s
Switching Frequency:Optimized ≤20 kHz 
Topology:IGBT Half-Bridge Module

Air Filter Assembly

Airflow Capacity:≥15–40 m³/h
Filter Class:G4/F9 grade
Temp. Rating:−20°C to +70°C.
Pressure Drop:10–20 Pa
Material Standards UL94-V0 
Housing Material:Galvanized steel or high-density plastic

Robicon MV Drive

Input Voltage:3-phase AC 6.6 kV
Output Frequency Range:0.0–120 Hz
Rated Power:5–40 MW
Output Voltage (Motor):3 kV to 6.6 kV
Overload Capacity:120% of rated current
Efficiency:>97%
Operating Temperature:0°C to +40°C
Ambient Humidity:Up to 95% non-condensing

DC Power Supply

Series: NXGPRO Plus NCP
Input Voltage:90 – 290 V AC ³ph
Output Voltage (DC):±24 V/48 V DC
Rated Current Per:Cell ≥200 A
Power Rating:6 kW per cell
Efficiency:≥95%
Resilient Networks: -48 V/24 V

POWER SUPPLY I/O BOARD

GH180 NXGpro USER I/O board 
Voltage Input:24 V DC (±10%) 
Mounting: Secured within GM150 Cabinet
Operating Temperature: 0°C – 55°C
RUN/STOP: Operational mode of the board