2155 Series

Proximity Probe HousingAssemblies

21000 aluminum probe housing assembly
28 3300 XL 8 mm probe
selectablehazardous area approvals
10 1.0 m (39 in)
No standoff adapter = 00
10.2 in (259.08) = 102
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT

Proximity Probe HousingAssemblies

21000 aluminum probe housing assembly
16 3300 XL 8 mm probe
10 1.0 m (39 in)
No standoff adapter = 00
10.2 in (259.08) = 102
03 One 3/4-14 NPT plug
One 3/4-14 to 1/2-14 NPT reducer
One cable seal grip with grommets for
the following cable sizes:
1/8 to 3/16 inches
1/4 to 5/16 inches
5/16 to 3/8 inches
02 3/4-14 NPT

Accelerometers

Mounting Thread: 1/4-28 Female
Mounting Torque(Maximum):2 to 5 ft-lb(2.7 to 6.8 N-m) 
Sensing Element :Ceramic
Sensing Geometry:Shear
Housing Material :Stainless Steel
Sealing Welded: Hermetic
Electrical Connector:2-Pin Mil-C-5015

Proximity Probe HousingAssemblies

A dome cover that screws into the body of the housing
Threaded ports for conduit connections
A probe sleeve of optional lengthl 0-rings
A reverse mount proximity probe
A thread seall Optional conduit fittings
An optional standoff adapter

Interconnect Cable

Description:Interconnect Cable (Extension Cable)
Length:30 feet (9.14 meters)
Conductor:Gauge 20 AWG stranded copper
Jacket Material:PVC (standard)
Voltage Rating:300 V AC/DC

Proximity ProbeHousing Assemblies

28 3300 XL 8mm probe
selectablehazardous area approvals
05 0.5 m (20 in)
No standoff adapter = 00
7.6 in= 076
04 One 3/4-14 NPT plug only
23/4-14 NPT
21000 Aluminum body with 304stainless steel sleeve

Proximity ProbeHousing Assemblies

dome cover that screws into the body of the housing
Threaded ports for conduit connections
probe sleeve of optional lengthl O-rings
reverse mount proximity probe
thread seall Optional conduit fittings
An optional standoff adapter

5mm / 8mm Series Proximity Transducer

Frequency Response: 0 Hz (DC) to 10 kHz
Noncontacting
Gap-to-Voltage Transducer Systems
Measures Static and Dynamic Distances

Series 10000 Proximity Probe

Operating Voltage: -18 V to -26 V DC
Sensitivity: 200 mV/mil
Linear Range: 0.08 to 0.18 inches
Frequency Response: 0 to 10 kHz
Temperature Sensitivity: ≤ ±0.15%/°C
Probe Diameter: 5 mm 
Thread: M10 × 1.0 (Metric)

Proximity ProbeHousing Assemblies

00 Probe not required
00 Probe cable not required
0.4 in= 04
02 Two 3/4-14 NPT explosion-proof fittings

Proximity Probe HousingAssemblies

16 3300 XL 8 mm probe
05 0.5 m (20 in)
096 Minimum length9.6 in 
00 Without fittings
02 3/4-14 NPT

8 mm Standard Mount Probe

Sensing Tip Diameter: 8 mm
Mounting Thread: 3/8-24 UNF
Unthreaded Length: 0.0 mm
Overall Case Length: 240 mm
Total Cable Length: 1.0 meter (39 inches)
Connector Type: Miniature male coaxial connector
Operating Temperature Range: -40°C to +177°C (-40°F to +350°F)

3300 NSv Proximity Probes

21000 aluminum probe housing assembly
16 3300 XL 8mm probe
05 0.5 m (20 in)
00 Without fittings
2 3/4-14 NPT

interconnect cable

Typically 50 Ohms 
Operating Voltage:≤30 V DC
Proximity Probe End: BNC connector
Bend Radius: ≥10x cable
Operating: -40°C to +85°C
Storage: -50°C to +105°C

4 Meter Armored Cable

3300XL 8MM 
4 Meter Armored Cable 
Insulation Rating: ≥250 V AC
Bend Radius: ≥100 mm
PVC: -40°C to +105°C (-40°F to +221°F)
PUR: -40°C to +90°C (-40°F to +194°F)

Proximity Sensor

10204400281002
PROXIMITY SENSOR
MODEL: 3300 XL 8 MM
1 M LENGTH
OUTPUT RESISTANCE: 50 O
OPERATING TEMP: -51 C TO +177 C
(060-987-158)

Velomitor CT Transducer

1 0Plate Stud M6x1 to 
M6x1with 3/8-in 24 adapter
Sensitivity:3.94 mV/mm/s (100 mV/in/s)±5%
Amplitude Linearity:±2% to 63.5 mm/s pk(2.5 in/s pk)
Dynamic OutputIm pedance:<400 Ω typical

Proximity Probe Housing Assemblies

A dome cover that screws into the body of the housingn 
Threaded ports for conduit connectionsn 
A probe sleeve of optional lengthn 0-ringsn 
A reverse mount proximity proben 
A thread sealn Optional conduit fittingsn 
An optional standoff adapter

Velomitor CT Velocity Transducer

1 2 Plate Stud 3/8-in 24 to M8x1
0 0 MIL-C-5015 connection interface
0 1 through0 4CSA/NRTL/C (Class I, Division 1)
ATEX/IECEx/CSA (Class I, Zone0/1)

Velomitor Interconnect Cable

Signal Type:±2 V/g sensitivity range
Impedance:50–100 Ω
Capacitance: ≤100 pF/m
Temperature Range: 
-40°C to +85°C (-40°F to +185°F).

Standard Interconnect Cables

2-conductor twisted
shielded 22AWG (0.5 mm2) cable 
with 2-socket moisture-resistant femaleconnector at one end
terminallugs at the other end 
(used withmonitors or vibration datacollectors)
Cable operating temperature is-50˚C to 120˚C
Minimum length of 2.0 ft (0.6 m)
maximum length of 99 ft (30 m)

Interconnect Cable

Capacitance: ≤100 pF/m
Temperature Range: 
-40°C to +85°C (-40°F to +185°F)
Impedance:50–100 Ω

Interconnect Cable

CONNECTOR CABLE
STRAIGHT
FEMALE
2POS
22AWG
25FT

Proximitor Probe Extension Cable

EXTENSION CABLE
PROXIMITOR PROBE
075 7.5 M (295 inches)
00 Without armor

Proximitor Probe Extension Cable

EXTENSION CABLE
PROXIMITOR PROBE
075 7.5 M (295 inches)
01 Without armor