ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Model: X108S1630
Type: Industrial Communication and Control Cable
Manufacturer: ABB (Bailey series)
Compatibility: Designed for ABB Bailey control systems, typically for data and signal transmission within DCS setups
Rated Control Supply Voltage (Us):
(50 Hz) 230...230 V
(60 Hz) 230...230 V
Power Loss:at Rated Operating Conditions per Pole 320 W
Power Supply:10 kV·A
Model Number:Basic device
Delay Time (τ):Release 0...0 second [unit of time]
Options Provided:with PT100 sensor
Typically 24 VDC
Low power requirement for efficient operation.
-20°C to +60°C (-4°F to +140°F).
-40°C to +70°C (-40°F to +158°F).
5% to 95% non-condensing.
Typically IP20 for internal cabinet installation
Input Signal:1-5 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for current loop compatibility
Response Time: <10 ms
Input Signal: 0-10 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for
current loop compatibility
Response Time: <10 ms
Response Time
Typically ≤ 1 ms for fast signal monitoring
Display
LED or LCD display (if applicable)
for real-time monitoring feedback
Mounting DIN rail or panel mount
Operating Temperature -20°C to +60°C
Storage Temperature -40°C to +85°C
Humidity5% to 95% non-condensing
Coil Voltage 118 VAC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Coil Voltage 24 VDC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A (resistive load)
Temperature Range -20°C to +60°C
Humidity5% to 95% non-condensing
I/O Type
Digital or Analog Inputs/Outputs
Input Voltage Range
Typically 24 VDC or 120/240 VAC
Max Switching Current Typically 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Input Type
3 inputs,
digital or analog depending
on configuration
Input Voltage Range
24 VDC or 120/240 VAC
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
