





















Kindly Reminder
Can't Find Your Required Components?
If your specific control system parts are not listed on our website, contact us immediately.
Our procurement specialists will source genuine new components tailored to your technical requirements.
All Amikon-supplied automation parts include:
12 Months Warranty
24h /7 online Service ( info@amikon.cn | +86 18020776786 )
Original new Factory Sealed
Interconnect Cable
Cable Length: 16 feet
Connector Type: BNC Male to BNC Male
Impedance: 75 Ohms
Maximum Voltage Rating: 300 Volts
Operating Temperature Range: -40°C to +85°C
tandard ArmoredInterconnect Cable
Stainless steel armor overshielded
0.382 mm2 (22 AWG)cable
moistureresistant female connector
Temperature range -29 to121°C (-20 to 250°F)
Interconnect Cable
Two-conductor 18 AWG
twisted, shielded cable
withright angle two-socket plugat one end
terminal lugs atthe other end
Used withmonitors and with 21128
Velocity Transducer Housing
Min. length: 2.0 ft (0.6 m)
Interconnect Cable
Right angle interconnectcable
Length: Typically 25 feet
Impedance: 50Ω or 75Ω
Operating: -40°C to +120°C (-40°F to +248°F)
Storage: -50°C to +150°C (-58°F to +302°F)
Interconnect cable
Two-conductor 18 AWGtwisted, shielded cable
withright angle two-socket plugat one end
terminal lugs atthe other end.
Used withmonitors and with 21128Velocity
Transducer Housing
Min. length: 2.0 ft (0.6 m)
Max. length: 99 ft (30 m)
Velomitor Piezo-velocity Sensors
03 1/4 - 28 UNF
01 CSA/US/C
PIEZO VELOCITY SENSOR
100MV/IPS 4MV/MM/S
Interconnect Cable
3300 XL 8mm Proximity Probes
System End: MIL-C-5015-style connector
Operational: -40°C to +120°C (-40°F to +248°F)
Storage: -50°C to +150°C (-58°F to +302°F)
Standard length: 10 meters (32.8 feet)
Interconnect Cable
Two-conductor 18 AWGtwisted,
shielded cable withright angle
two-socket plugat one end,
terminal lugs atthe other end.
Used withmonitors and with
21128Velocity Transducer Housing.Min.
length: 2.0 ft (0.6 m)
Max. length: 99 ft (30 m)
Armoured Extension Cable
Capacitance: Low capacitance < 50 pF/m
Temperature Range: -40°C to +150°C (-40°F to +302°F)
Impedance: 50–100 Ω
Velomitor Piezo-velocity Sensors
01 1/2 - 20 UNF
Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range:1270 mm/s (50 in/s) peak.
TransverseSensitivity:Less than 5% of sensitivity.
AmplitudeLinearity:±2% to 152 mm/s (6 in/s)peak.
OperatingTemperatureRange:
-55°C to 121°C(-67°F to 250°F)
Velomitor Interconnect Cable
Signal Type:±2 V/g sensitivity range
Impedance:50–100 Ω
Capacitance: ≤100 pF/m
Temperature Range:
-40°C to +85°C (-40°F to +185°F).
Interconnect Cable
Capacitance: ≤100 pF/m
Temperature Range:
-40°C to +85°C (-40°F to +185°F)
Impedance:50–100 Ω
Velomitor Piezo-velocity Sensor
00 No adapter
04 Multiple approvals (CSA, ATEX)
Velomitor Piezo-velocity Sensor
Velomitor Piezo-velocity Sensors
02 M8 x 1
02 ATEX (European)
Velomitor Piezo-velocity Sensor
Velomitor Piezo-velocity Sensors
02 M8 x 1
01 CSA/US/C
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
TemperatureSensitivity-14% to +7.5%
Velocity Range 1270 mm/s (50 in/s) peak.
TransverseSensitivityLess than 5% of sensitivity
Velomitor Piezo-velocity Sensor
Velomitor Piezo-velocity Sensor
07 3/8 – 16 UNC
00 Not required
Velomitor Piezo-velocity Sensor
04 1/4 - 20 UNC
00 Not required
Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range:1270 mm/s (50 in/s) peak
Output BiasVoltage:-12 ±3.0 VDC
DynamicOutputImpedance :Less than 2400 Ω
OperatingTemperatureRange:-55°C to 121°C(-67°F to 250°F)
Velomitor Piezo-velocity Sensor
01 1/2 - 20 UNF
00 Not required
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%
Velocity Range 1270 mm/s (50 in/s) peak
Output BiasVoltage-12 ±3.0 VDC
overtemperature referenced toPin A
Velomitor Piezo-velocity Sensor
02 M8 x 1
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range 1270 mm/s (50 in/s) peak
AmplitudeLinearity±2% to 152 mm/s (6 in/s)peak
MountedResonantFrequencyGreater than 12 kHz.
Velomitor Piezo-velocity Sensors
02 M8 x 1
04 Multiple approvals (CSA, ATEX)
Velocity Range:1270 mm/s (50 in/s) peak.
Sensitivity:3.94mV/mm/s (100 mV/in/s)±5%
Transverse Sensitivity:Less than 5% of sensitivity
Amplitude Linearity:±2% to 152 mm/s (6 in/s)peak
Dynamic Output Impedance:Less than 2400 Ω
Velomitor Interconnect Cable
84661-50
Velomitor Interconnect Cable
Min. length: 3.0 ft (0.9 m)
Max. length: 96 ft (29 m)
Velomitor Piezo-velocity Sensors
02 M8 x 1
00 Not required
Sensitivity3.94mV/mm/s (100 mV/in/s)±5%.
Velocity Range 1270 mm/s (50 in/s) peak.
TransverseSensitivityLess than 5% of sensitivity.
MountedResonantFrequencyGreater than 12 kHz
DynamicOutputImpedanceLess than 2400 Ω

Copyright Notice © 2004-2024 amikong.com All rights reserved
Disclaimer: We are not an authorized distributor or distributor of the product manufacturer of this website, The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because our company is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply.While many DCS PLC products will have firmware already installed, Our company makes no representation as to whether a DSC PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Our company also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from our company, its distributors, or any other source. Our company also makes no representations as to your right to install any such firmware on the product. Our company will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.