ABB

Variable Frequency Drive

Power Range: 0.55kW
Low Voltage: 380-480V AC
Medium Voltage: 500-690V AC
Input Frequency: 47-63Hz
Output Frequency: 0-300Hz 
Overload Capacity: 110% continuous
Digital Outputs: 3 relay (2A/250V AC)
Analog Outputs: 2 (0/4-20mA or 0-10V)

Power Board

Input Voltage:24V DC nominal 
Output Voltage:+5V DC (±1%)
Current Capacity:10A (50W)
Total Power: 170W maximum
Efficiency: >85% at full load
Ripple Noise: <50mV p-p
Reverse polarity protection
Overvoltage protection (35V DC max)
Inrush current limiting

FEEDER TERMINAL

Rated Voltage (Vn): 100/110V AC
Burden: <0.2 VA per phase
Rated Current (In): 1A or 5A
Burden: <0.1 VA per phase at In
Digital Inputs: 8–16 
Contact Rating: 5A @ 250V AC/DC
Power Consumption: <15W (typical)

SWITCH-DISCONNECTOR

3-pole
front operated
base mounted
DIN-rail mountable switch-diconnector
non-fusible diconnect switch 
with front protected clamp terminals
handle and shaft are not included

PEC80 Converter Signal Int

Input Voltage Range: 24V DC
Operating Voltage: 15–30V DC 
Current Consumption: 50–200 mA 
Isolation Voltage: ≥500V 
Analog inputs: ±10V, 4–20mA
Digital inputs :TTL/relay contact

Controller I/O Module

Supply Voltage: 24V DC 
Power Consumption: 2–5W
Isolation: 500V AC 
Voltage: 24V DC
Switching Frequency: Up to 1 kHz
Range: 0–10V, ±10V, 4–20mA
Resolution: 16-bit (high precision)
Accuracy: ±0.1% FS (full scale)

Control Board

Supply Voltage: 24V DC
Isolation: 500V AC
CPU: 32-bit industrial 
Clock Speed: 100–200 MHz 
Memory Flash: 8–16 MB
Digital I/O:2–4 channels

Converter Electronics

CONVERTER
POWER CONTROL UNIT
UNS 3670A-Z V1
Input Voltage Range: 380-480V AC
DC Link Voltage: 510-650V DC
Output Power Rating: 15-30kW
Frequency Range: 50/60Hz ±10%
Efficiency: >95% 
Switching Frequency: 2-8kHz

Conduction Monitoring Coil

Rated Current: 50A to 5000A 
Frequency Range: 50/60Hz ±10%
Output Signal: 0-5V or 4-20mA
Accuracy Class: 1% or better 
Phase Shift: <3° at rated current

Three-phase voltage relay

Rated Voltage: 100-480V AC
Frequency Range: 45-65Hz
Input Impedance: >100kΩ per phase
Burden: <0.2VA per phase
Measuring Accuracy: ±1% of set value or ±0.5V 
Voltage Unbalance: 5-30% of Un
Contact Rating: 5A @ 250V AC/DC