ABB

ACS800 Drive Board

Input Voltage:380–480 V AC
DC Link Voltage:540–650 V DC
Auxiliary Voltage:24 V DC
Product Line:ABB ACS800 Industrial Drives 
Isolation Voltage:2.5 kV AC

ACS800 Drive Board

Input Voltage:380–480 V AC (±10%)
DC Link Voltage:540–650 V DC
Protections:DC over/undervoltage
Auxiliary Voltage:24 V DC 
Isolation Voltage:2.5 kV AC

INTERFACE BOARD

Data Rates:9.6 kbps – 12 Mbps
Power Supply:24 V DC
Power Consumption:≤ 2.5 W
Isolation:500 V AC
Function:PROFIBUS DP-V1 Slave Interface

Processor module

Memory Size:5032 kB
Memory Type User Data:RAM
Controller Processing Time:0.00002 ms
Number of Digital Inputs:12
Number of Digital Outputs:8
Number of Digital Configurable I/Os:2
Input Voltage Type:DC
Output Voltage (Uout):24 V DC
Output Current:0.5 A
Degree of Protection:IP20
Rated Voltage (Ur):24 V DC
Supply Voltage:20.4 … 28.8 V DC

MAIN CIRCUIT INTERFACE BOARD

Input Voltage:200–480 V AC
DC Link Voltage:280–650 V DC 
Auxiliary Voltage 24 V DC
PWR (Green): 24V OK
RDY (Yellow): Drive ready
ERR (Red): Fault detected
Isolation Voltage:2.5 kV AC

IGBT Module

Voltage Rating:1200 V
Current Rating:900 A
Technology:Trench-gate IGBT4 
Collector-Emitter Sat.:VCE(sat): 1.75 V (typ.) 
Short-Circuit Withstand:10 μs 
Isolation Voltage:4.5 kV RMS

IGCT Module

Configuration:Single IGCT
Voltage Rating:4500 V
Current Rating:1200 A 
Critical dv/dt:1000 V/μs (min.)
Isolation Voltage:10 kV RMS
Mounting Force:35–45 kN

Analog Input Module

Function:32-Channel Analog Input Module
Voltage: ±10 V DC, 0–10 V DC
Current: 0–20 mA, 4–20 mA
Resolution:15 bits + sign 
Accuracy:±0.1% of full scale @ 25°C
Update Time:8 ms (all channels)
Common-Mode Rejection:>120 dB @ 50/60 Hz
Overvoltage Protection:±35 V DC
Power Supply:24 V DC

INPUT MODULE

INPUT MODULE
32POINT
DIGITAL
SDR SDRAM
4 SOCKET

LOGIC CONTROLLER

LOGIC CONTROLLER
32 CHANNELS
18-30 VDC
2 VDC
OUTPUT RATING: 0.01 A MINIMUM
AT 24 VDC 1.0 A MAXIMUM
24 VDC CONTINUOUS
SURGE: 2.5 A PER CHANNEL
ISOLATION: 1K VDC
10 MA PER CHANNEL

SSI Speed Sensor Interface

Frequency:62.5 kHz
Cable Length Support: Up to 350 meters 
Internal Logic Supply: +5V DC
Encoder Supply: +24V DC
Current Limit: Typically 250mA

Digital Output Module

Channels: 20 single-ended channels 
Voltage: ±10 V DC
Current: 0–20 mA, 4–20 mA
Voltage Inputs: >1 MΩ.
Current Inputs: 250 Ω 
Noise Rejection: >80 dB (50/60 Hz)
Channel-to-Backplane: 1,500 V AC RMS

COMMUNICATION UNIT

Data Throughput: Up to 10,000
RAM: 512 KB
Voltage: +5V DC
Consumption: 10 W (typical)
Isolation:1500V AC 
Fiber optic: Up to 4 km
Max Nodes: Up to 250 devices per loop

Control unit

Processor:32-bit 
I/O Capacity Up to 1,024 I/O points
Voltage: +5V DC
Consumption: 15 W
Battery Backup:BCL003 battery module

Modbus TCP Interface Module

Data Types:16-bit & 32-bit integers 
Voltage: 5 V DC
Power Consumption: Typically 1.5 W 
Isolation:1500 V AC galvanic 

Multi Fuel-flame Detector

Detection Range:Up to 40 meters 
Response Time:< 3 seconds 
Supply Voltage:24 V DC
Power Consumption:4–8 W (DC)
Relay Contacts: 2× SPDT 
Analog Output: 4–20 mA

SPEED MEASURING BOARD

Speed Range:0–12,000 RP
Accuracy:±0.1% of full scale (25°C)
Resolution:1 RPM 
Supply Voltage:+24 V DC (±10%) 
Power Consumption:≤5 W
Input Sensitivity:50 mV–30 V RMS (MPU)
Isolation :1500 V AC (channel-to-logic)

POWER INTERFACE BOARD

Input Voltage:24 V DC
Logic Voltage:+5 V DC (±5%), Max 8 A
Analog Voltage:±15 V DC (±5%), Max 1 A
Isolation 1500 V AC
2× Isolated Outputs
Power Redundancy:Supports dual power supplies

Inverter Board

DC Link Voltage:200–480 V DC 
Output Phase Voltage:0–480 V AC
Max Output Current:Up to 45 A 
Switching Frequency:4–16 kHz 
IGBT Technology:Trench-gate IGBTs

Safety Board

CPU Module

Model:PM590-ETH
Order Code:1SAP150000R0270
Type:Compact PLC Processor with Integrated Ethernet
Series:AC500-eCo 
Power Supply:24 V DC (±20%)
Consumption: 6 W (typical)
CPU:32-bit RISC Processor
Isolation :1500 V AC

IGBT MODULE + BOARD

NSULATED GATE BIPOLAR TRANSISTOR
500A I(C)
1200V V(BR)CES
N-CHANNEL
IGBT MODULE + BOARD
FOR INVERTER DRIVE

CEX-Bus Interconnection Unit

Bus Protocol:CEX-Bus
Data Rate:10 Mbps 
Fiber Type:62.5/125 μm multimode
Redundancy:Dual-path redundancy 
Node Capacity:Up to 32 nodes 
Power Supply:24 V DC (±10%)
Power Consumption;≤ 5 W
Isolation:2500 V AC

Softstarter

Type:Thyristor-Based Soft Starter
Rated Current:142 A 
Motor Power (400V):75 kW 
Input: 208–690V AC (±10%), 50/60 Hz
Control Circuit: 100–250V AC/DC
Current Limit: Adjustable (200–500% I_e)
Pump Stop: Anti-water-hammer control

Control Card

Power Supply:24V DC
Voltage: 15–30V DC
Current: 3–8 mA
Rating: 2A @ 250V AC
Resolution: 10-bit
Load Impedance: ≥500Ω (voltage)
Baud Rate: 9600–115200 bps
Isolation:1500V AC