ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Input Voltage: +5V, +12V
Current Consumption: Typically under 2A
RS-232/RS-485
Operating Temperature: 0°C to 50°C.
Storage Temperature: -20°C to 70°C.
Relative Humidity: 5% to 85% (non-condensing)
Power Supply: 24V DC (±10%)
Power Consumption: 3.5W (typical)
Number of Channels: 8
Current Output Range: 4-20mA
Voltage Output Range: 0-10V
Resolution: 16-bit
Accuracy: ±0.1% of span
Current: ≤750Ω
Voltage: ≥1kΩ
Input Voltage:24V DC nominal
Input Current:3-8mA per channel
Isolation:1500V AC (field to logic)
Response Time:<1ms (ON/OFF)
Number of Channels:32
Voltage Rating:1600V (V_RRM)
Current Rating:300A (I_FAVM)
Surge Current:8kA (I_FSM, 10ms)
Forward Voltage:1.25V @ 300A (typical)
Range: Typically 4-20 mA
Input Impedance:≤ 10 Ω
Load Capacity: Standard 0-500 Ω
Voltage: 24 V DC
Test Voltage: Typically 1.5 kV AC
Typical: ±0.1% of full scale
Communication Interface:RS-232, RS-485
Data Transfer Speed:Up to 115,200 bps
Power Supply:24V DC
Mounting Type:DIN rail mounted
Operating Temperature:-20°C to 60°C (-4°F to 140°F)
Storage Temperature:-40°C to 85°C (-40°F to 185°F)
Humidity Tolerance:5% to 95% non-condensing
Voltage: 125 VDC Nominal
Power Consumption: Typically < 5W
Input-to-Input: 1500 VAC min.
Input-to-Output/Logic: 1500 VAC min.
Output-to-Output: 500 VAC min.
Output/Logic-to-S+ I/O: 500 VAC min
Rated Voltage:400 V AC (3-phase, 4-wire)
Rated Current:22 A (continuous)
Rated Frequency:50/60 Hz
Transfer Time:< 100 ms (typical for open transition)
Withstand Current:10 kA (IEC 60947-6-1)
Mechanical Life:10,000 cycles (minimum)
Number of Positions:10 Position
Pitch:9.53 mm
Current Rating:30 A
Voltage Rating:300 V
Wire Gauge Min:22 AWG
Wire Gauge Max:14 AWG
Type:Terminal Block
Number of Rows: 2 Row
Mounting Style:Panel Mount
Protocol: PROFIBUS DP-V0
Data Transfer Rates:up to 12 Mbp
Connector Type: 9-pin D-sub
Electrical Interface: RS-485
Voltage: +5 V DC
Power Consumption: 1-2 W
Max. Input Data (to Master): Up to 244 bytes per cycle
Max. Output Data (from Master): Up to 244 bytes per cycle
Protocol: PROFIBUS DP-V0 Data Transfer Rates:up to 12 Mbp Connector Type: 9-pin D-sub Electrical Interface: RS-485 Voltage: +5 V DC Power Consumption: 1-2 W Max. Input Data (to Master): Up to 244 bytes per cycle Max. Output Data (from Master): Up to 244 bytes per cycle
CPU Type: 32-bit RISC-based processor
Clock Speed: 100–200 MHz
Program Memory: Up to 4 MB Flash
Data Memory: Up to 2 MB RAM
Execution Speed: 0.1 ms
Input Voltage: 24V DC
Resolution: 12-bit to 16-bit
Channels:8/16 DI or DO
Input Voltage:24V DC
Output Type:Relay/Transistor
Isolation:1.5kV AC
PROFIBUS DP (via coupler)
Modbus RTU (RS-485)
EtherNet/IP (optional)
