ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Bus Protocol:CEX-Bus
Data Rate:10 Mbps
Fiber Type:62.5/125 μm multimode
Redundancy:Dual-path redundancy
Node Capacity:Up to 32 nodes
Power Supply:24 V DC (±10%)
Power Consumption;≤ 5 W
Isolation:2500 V AC
Type:Thyristor-Based Soft Starter
Rated Current:142 A
Motor Power (400V):75 kW
Input: 208–690V AC (±10%), 50/60 Hz
Control Circuit: 100–250V AC/DC
Current Limit: Adjustable (200–500% I<sub>e</sub>)
Pump Stop: Anti-water-hammer control
Power Supply:24V DC
Voltage: 15–30V DC
Current: 3–8 mA
Rating: 2A @ 250V AC
Resolution: 10-bit
Load Impedance: ≥500Ω (voltage)
Baud Rate: 9600–115200 bps
Isolation:1500V AC
Input Voltage:24 V DC
Power Consumption:≤ 8 W
Torque Response: ≤ 2 ms
Accel/Decel Rates: Up to 3x faster vs
Overload Capability: 200%
Type:Dynamic Performance Module
Power Supply:24V DC (±10%)
Power Consumption:≤ 3 W
Input Channels:8x Isolated Voltage Inputs
Resolution:16-bit
Accuracy:±0.1% of FS (Full Scale) at 25°C
Input Impedance ≥1 MΩ
Sampling Rate:10 ms/channel
Channel-to-Channel: 300V AC
Overvoltage Protection:±30V continuous
Overload Protection:±30V (voltage)
Power Supply:24V DC
Power Consumption:≤ 1.5 W
Input Channels:4x Isolated Channels
Voltage: 0–10V, ±10V, 0–5V
Current: 0–20mA, 4–20mA
Resolution:12-bit
Sampling Rate:2 ms per channel
Voltage: ≥100 kΩ
Isolation:1500V AC
Type:8-Channel Isolated
Sink/Source: Auto-detecting
Voltage Range: 15–30V DC
Input Current 3–8 mA
Response Time:≤ 2 ms
Isolation:1500V AC
Power Supply:24V DC
Power Consumption:≤ 1.8 W
DRIVE BOARD
RESISTIVE NETWORK
STATUS LED INDICATORS
YT204001-FK
Number of Channels: Typically 4 or 8
Switching Capacity: Up to 2A per channel
Supply Voltage: 24V DC
Isolation Voltage: 1500V AC
Response Time: <1ms
Input Voltage:24V DC nominal (15-30V range)
Input Current :3-5mA per point
Output Type:Relay (Form C) or Solid State
Output Rating:2A @ 30V DC
Isolation Voltage:1500V AC
Response Time:<1ms (input)
Contact Configuration:96-position (48x2 rows)
Contact Material:Gold-plated copper alloy
Current Rating:1A per contact (max)
Voltage Rating:60V DC max
Contact Resistance:<20mΩ (initial)
Insulation Resistance:>100MΩ @500V DC
Mating Cycles: >500 insertions
Supply Voltage:24V DC ±10%
Power Consumption:20W (typical)
Processor:32-bit DSP (200MHz)
Memory:16MB Flash, 8MB RAM
Isolation Voltage:1500V AC (I/O to logic)
Analog I/O update rate: 1 kHz
Digital I/O update rate: 10 ms
Standard range: -20°C to +60°C
Extended range: -40°C to +70°C
Power consumption: Max. 10W
Humidity: 5% to 95% RH
16-bit resolution for analog inputs/outputs
Input Voltage Range:5-30V DC (HTL)
Input Frequency:0-500kHz
Output Signal:Differential (RS422) or single-ended
Output Current:20mA max
Power Supply:24V DC ±10%
Power Consumption:5W typical
Resolution: Up to 4096 pulses/revolution
Signal Delay: <100ns
Operating Time:<8ms for critical faults
Measurement Accuracy:±0.5% of reading
Sampling Rate:64 samples/cycle
Time Sync Accuracy:±1μs
Power Supply:48-125V DC or 90-264V AC
Power Consumption:15W typical
Isolation Voltage:2.5kV AC
16 digital inputs (24V DC)
Configurable as sinking/sourcing
3ms debounce filtering
Channel-by-channel LED status
Voltage Range:5-30V DC
Current:3mA typical
Isolation:1500V AC
Analog Input :4-20mA/0-10V
Analog Output:4-20mA/0-10V
Digital Input:24V DC
Digital Output:24V DC, 0.5A
Resolution:16-bit
Accuracy:±0.1% of span
Input Impedance:250Ω
Input Voltage:24V DC (15-30V range)
Output Current:0.5A max per channel
Response Time:<1ms
Backplane Interface: Redundant S800 I/O bus
Update Rate: 10ms (all channels)
Rated Current (Ie):6A (AC-1)
Rated Voltage (Ue):230V AC / 24V DC
Breaking Capacity:3A @ 400V AC (AC-3)
Contact Material:Silver alloy (AgSnO₂)
Coil Voltage:24V DC / 48V DC / 110V AC / 230V AC (selectable)
Power Consumption:2.2W (DC) / 3.5VA (AC)
Operate Time:≤15ms (DC), ≤20ms (AC)
Release Time:≤10ms (DC), ≤15ms (AC)
Overload (49):20-100% of In
Short Circuit (50):2-15×In
Phase Loss (46):Fixed/Adjustable
Ground Fault (51G):20-40% of In
Rated Current (In):6A (CT 5-100A)
Control Voltage:24-240V AC/DC
Contact Rating:5A @ 250V AC (resistive)
Communication:RS-485
Accuracy:±0.1% of span
Galvanic isolation:1500V AC channel
Range:4-20mA / 0-20mA
Resolution:16-bit
Load Capacity:≤750Ω
Update Rate:10ms per channel
Power Supply:24V DC ±10%
Power Consumption:5W (max)
Isolation Voltage:1500V AC
Range:4-20mA / 0-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Load Capacity:≤750Ω
Update Rate:5ms per channel
Power Supply:24V DC ±10%
Isolation:1500V AC
Power Supply:24V DC ±10%
Power Consumption:6W (typical)
Isolation:1500V AC
Range:4-20mA / 0-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Load Capacity:≤750Ω
Update Rate:5ms per channel
Power Supply:24V DC ±10%
Power Consumption:4W (typical)
Isolation:1500V AC
Range:4-20mA / 0-20mA
Resolution:16-bit
Accuracy:±0.1% of span
Load Capacity:≤750Ω
Update Rate:10ms per channel
Power Supply:24V DC ±10%
Analog Input:4-20mA / 0-10V
Digital Output:Relay, 5A @ 250V AC
Overcurrent:5-100A
Ground Fault;1-10A
Protocol: Modbus RTU (RS-485)
Baud Rate: 1200-19200 bps
Processor:Dual-core PowerPC @ 800MHz
Memory:64MB Flash, 32MB RAM
Control Loops:Up to 128 PID loops
Ethernet: 2x 10/100BASE-T
Serial: 1x RS-485
Fieldbus: PROFIBUS DP
Digital Input:24V DC
Digital Output:Relay, 2A @ 30V DC
Analog Input:4-20mA/0-10V
Analog Input:4-20mA
Digital Input:24V DC, 3mA
Analog Accuracy:±0.1% of span
Digital Isolation:1500V AC
Update Rate:10ms (all channels)
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Backplane Interface: S800 I/O bus
Power Supply:24V DC ±10%
Power Consumption:6W (max)
Isolation:1000V AC
Range:4-20mA
Resolution:16-bit
Accuracy:±0.05% of span
Input Impedance:250Ω
Update Rate:10ms/channel
Power Supply:24V DC ±10%
Power Consumption:8W (max)
Current:0-20mA/4-20mA
Voltage:0-10V/±10V
RTD:Pt100/Pt1000
Sampling Rate:50Hz/channel
Common Mode Rejection:>120dB @ 50/60Hz
Normal Mode Rejection:>60dB
Input Impedance:250Ω (current)
Operating Voltage:Typically 24V DC
Analog:0-10V
Digital :CANbus/DeviceNet
Current Consumption:<100mA
Degrees of Freedom:2 or 3 axes
Handle Material:Industrial-grade plastic/metal
Mechanical Life:>1 million cycles
Operating Force:3-10N
Power Supply:24V DC ±10%
Power Consumption:5W (typical)
Isolation:1500V AC
Protocol:PROFIBUS DP
Data Rates:9.6kbps - 12Mbps
Address Range:0-125
Response Time:<1ms
Power Supply:24V DC ±10%
Power Consumption:4W (typical)
Isolation:500V AC (channel-to-channel)
Backplane Current:100mA (max)
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Power Supply:24V DC ±10%
Power Consumption:5W (max)
Isolation:500V AC
Backplane Current:120mA (max)
Output Type:Solid-state
Output Voltage:24V DC
Output Current:0.5A per channel
Switching Frequency:Up to 100Hz
Leakage Current:<1mA
Power Supply:24V DC ±10%
Power Consumption:3W (typical)
Backplane Current:80mA (max)
Update Rate:10ms
Input Type:Sink/Source (configurable)
Input Voltage:12-60V DC
Threshold Voltage:8V DC (ON), 5V DC (OFF)
Input Current :3mA @ 24V DC
Response Time:<1ms
Isolation:1500V AC
