ALL MANUFACTURERS

Control Board

Power Supply:24 V DC 
Differential: ±12 V.
Power consumption: < 5 W
Single-ended: 0–24 V
Output Voltage:
TTL: 0–5 V.
HTL: 0–24 V

MICROMASTER 440 WITHOUT FILTER

MICROMASTER 440 
without filter 380-480 V 
3 AC +10/-10% 47-63 Hz 
constant torque 15 kW 
overload 150% 60 s, 
200% 3 s square-law torque 18.5 kW 
520x 275x 245 (HxWxD) 
degree of protection IP20 ambient 
temperature -10+50 °C 
without AOP/BOP

MICROMASTER 440 WITHOUT FILTER

MICROMASTER 440 
without filter 380-480 V 
3 AC +10/-10% 47-63 Hz 
constant torque 5.5 kW 
overload 150% 60 s, 
200% 3 s square-law torque 7.5 kW 
245x 185x 195 (HxWxD) 
degree of protection IP20 
ambient temperature -10+50 °C 
without AOP/BOP

Pulse Input Module

8 pulse input channels
Voltage Range: 5–30 V DC 
Standard: 0–10 kHz
Frequency Measurement: ±0.01% of reading
Channel-to-Channel Isolation: ≥ 1500 V AC/DC
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Humidity:
0–95% non-condensing

Pulse Input Baseplate

Frequency/Rate: Up to 10 kHz 
Voltage Range: 5–30 V DC
Counting Resolution: 24-bit 
Frequency Accuracy: ±0.01%
Channel-to-channel isolation: ≥ 1500 V AC/DC
Field-side Power: 24 V DC
Operating Temperature:
-40°C to +70°C (-40°F to +158°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)

TERMINAL BLOCK

PRESSURE CLAMP TERMINAL BLOCK
STARDOM
BASIC TYPE
FOR CONNECTION USE WITH ANALOG
12 CHANNEL MODULE

TERMINAL BLOCK

PRESSURE CLAMP TERMINAL BLOCK
STARDOM
BASIC TYPE
FOR CONNECTION USE WITH ANALOG
12 CHANNEL MODULE

19 INCH RACK

Max number of mountable I/O modules:8 
Number of mountable Power suply modules:2 
S Standard type
0 19-inch rack-mounted
BASE MODULE
STYLE S1
STANDARD TYPE
19 INCH RACK
DIN MOUNT
(92F306027)

Serial Communication Module

Interface:RS-422/RS-485 (2 ports)
How connected:Multipoint
How communicates Half-duplex/Full-duplex
How synchronizes Start-stop synchronization
Transmission code ASCII/binary
Character length:7/8 bits
Stop bit :1/2 bits
Parity check None/even/odd
Transmission distance Maximum:1200 m
Current consumption:500 mA

RTD Input Module

Number of input channels:12, isolated
Allowable input voltage:±5 V
Between input and system: 1500 V AC for 1minute
Power ON :2 MΩ or more
Power OFF: 2 MΩ or more
Allowable total resistance of signalsource plus wiring:40 Ω or less 
Effect of allowable signal source resistance (1000 Ω): ±20 μV
Measurement current:1 mA
Temperature drift:Max. ±30 ppm/°C 
Maximum current consumption:450 mA (5 V DC)