ALL MANUFACTURERS

Remote Distress Alarm

Input Voltage: 24V DC (nominal)
Power Consumption: Typically 10W
Operating Temperature: -15°C to +55°C
Storage Temperature: -40°C to +70°C
Humidity: 0 to 95% RH, non-condensing

Powermonitor 3000 Master Module

Powermonitor 3000
Master Module with 
3-Phase metering & setpoints & I/O
Data logging
5 Amps, Control Power
120V/240V AC 50/60- Hz or 
125V/250V DC
Revenue metering 
compliance to 1% Accuracy

Digital input module

I/O module:16 digital inputs 24 VDC in 4 groups
Status indicators:I/O function per channel
Operation:0 to 60°C
Storage:-25 to 70°C
Nominal voltage:24 VDC
Hardware:≤12 ms

Temperature Controller

Switchable displaysk 
Text or bar graph displayk 
8 limit comparatorsk 
4 setpointsk 
2 parameter setsk 
Maths and logic modulek 
Ramp and profile program function

Network switch

Concept:Transparent Ready
Port Ethernet:10/100BASE-TX - 8 port(s) copper cable
Supply voltage limits:9.6…32 V DC SELV
Power consumption in W:6 W
Alarm output:1 voltfree contact 1 A
Ambient air temperature for operation:0…60 °C
rated supply voltage:12...24 V

Weight indicator

Load cell supply 5 V alternating current supply
Input signal 0 15 mV
Sensitivity 0.6 μV / d
Unit kg, g, t, lb, N, kN
Linearity error <0.05 ‰ / 10 K
Range stability,TKc<0.04 ‰ / 10 K

Flue Gas Oxygen Analysers

Measuring Range:From 0 to 1 %, 0 to 25 % O2 v/v 
Linearity:±1 % of output span 
Repeatability:±1 % of output span 
Max. Flue Gas Temperature: 800 °C (1472 °F) 
Sample Pressure:±2 psig (± 13.8 kPa)
Display / Keypad:Single-line 4 digit LED; 4 keys
Environment:Ambient Temp.: -20 to 71 °C (-5 to 160 °F) 
Relative Humidity:10 % to 80 %, non-condensing 

Encoder

Power Supply:Typically 5 to 24 VDC
Current Consumption:Typical: 40 mA
Operating Temperature:
-10°C to +70°C (14°F to 158°F)
Storage Temperature:
-20°C to +85°C (-4°F to 185°F)

SYNCHRONIZING UNIT

Input Voltage:110/220 VAC or 24 VDC
Frequency Range:50 Hz or 60 Hz
Frequency: ±10%
Operating Temperature:-10°C to +60°C (14°F to 140°F)
Storage Temperature:-40°C to +85°C (-40°F to +185°F)
Humidity:5–95% RH

Discrete I/O Module

Input Voltage Range: 0–30 VDC
Output Voltage Range: 0–30 VDC
Output Current: Up to 2 A per channel
Input Voltage: 24 VDC ±10%
Power Consumption: ≤10 W
Operating Temperature: -40°C to +85°C
Storage Temperature: -55°C to +100°C
Humidity: 5–95% RH

Operator Panel

Digital inputs +12 VDC / +24VDC
Relay outputs 230 V AC/DC, 2 A
Analogue inputs 0-10 VDC
Ambient air temperature 0 ... 50 °C

CONTROL MODULE

Rated Voltage: 24 VDC ±10%
Power Consumption: <10 W
Range: 0–5 A
Accuracy: ±0.5%
Operating Temperature: -25°C to +70°C
Storage Temperature: -40°C to +85°C
Humidity: 0–95% RH (non-condensing)
Vibration Resistance: 2 G (10–500 Hz)

OPERATOR INTERFACE

OPERATOR INTERFACE
5.7 INCH DISPLAY
TOUCH SCREEN
320X240 PIXELS
2 RS232/484
12-24VDC
540MA/270MA

Pm Motor Control

MOTOR CONTROL
220 V AC
PERMANENT MAGNET
SCREW CLAMP TERMINALS

TOUCH SCREEN

640 x 480 pixels
TFT display
6.5" TFT-LCD screen
Project storage 12 MB
Operating temperature 0 to +50 °C
Ethernet and serial
16 keys / 16 LEDs

Chiller Microprocessor Card

Power Supply: 24 VAC/DC ±10%, 50/60 Hz
Rated voltage: 250 VAC
Maximum current: 8 A 
Operating Temperature: -10°C to +60°C
Storage Temperature: -20°C to +70°C
Humidity: 10% to 90% RH

DIGITAL INDICATING LIMIT CONTROLLER

TEMPERATURE CONTROL
RELAY OUTPUT
SINGLE ALARM
100 TO 240V AC
2CV AC/DC

CPU module

Operating Temperature:Typically -10°C to +55°C
Storage Temperature:-20°C to +70°C
Input Voltage:24 V DC
Power Consumption:20 to 40 W

WCU Display

Operating Temperature:Typically -10°C to +55°C
Storage Temperature:-20°C to +70°C
Input Voltage:24 V DC
Power Consumption:20 to 40 W

THERMOCOUPLE AMPLIFIER

Power supply 24 VDC (12 to 35 V)
Output signal 4 to 20 mA / 2-wire
Load 0 to 1000 Ohm (35 V)
Accuracy Thermocouple at 25 °C ±2 °C (ITS-90)
Output shift by ambient temperature ±0.005 % 
Operating ambient temperature -40 to +125 °C

Chipset type:Intel 945GME at 533 MHz
Display size:15 inch
Display colour:16 million colours
Luminance:350 cd/m²
Supply voltage limits:85…265 V
Inrush current:40 A
Power consumption in W:130 W
Material:Treated steel

Vigilohm Digital Insulation Monitoring

Voltage:Standard 500 V DC
Accuracy: ±5% of reading
Operating Temperature:Typically -10°C to +55°C
Storage Temperature:-20°C to +70°C
Relative Humidity:10% to 95%, non-condensing
Input Voltage:24 V DC or 230 V AC

Carel Fan Speed Controller

Single-phase supply 230V +10%/-1
Frequency 50/60
Control signal 0 to 10V
Power supply for possible manual control (+V terminal) 20 Vdc 40 
Input Voltage:230 VAC ± 10%, 50/60 Hz
Operating Temperature:0°C to +50°C
Storage Temperature:  -20°C to +70°C
Relative Humidity:10% to 90% RH, non-condensing.

Analog I/O Module

Power Supply Voltage:24 VDC
Analog Input Channel :4 channels per module
Analog Input Range: ±10V 
Digital Data Range :±2000
Resolution :12 bits (1LSB=5 mV)
Input Impedance :200 KΩ and above
Response Time: 3 ms × channels  
Absolution Input Range :±15 V 
Analog Output Range: 0~10V
Digital Data Range :0~4000 

Network Controller

Supports one or two doors
8 inputs, 4 outputs
Up to 5,000 cardholder badges
4 MB flash memory
10/100Base-T network connection
64 schedules