Transmission method Serial communication
Baud rate 128 Mbps
Transmission distance Max. 8 m per line
Extension units Max. 2 units
Duplex configuration Possible
Supplyvoltage 5 V DC±5%
Currentdissipation Max. 500 mA
Rated input voltage:220 to 240 V AC
Input voltage range:170 to 264 V AC (rms)
Input frequency:47 to 66 Hz (Rating: 50/60 Hz)
Input current: Max. 0.7 A
Fuse rating:3.15 A
Leak current Max. :1 mA
Withstanding voltage:3000 V AC for 1 minute
Insulation resistance:50 MΩ at 500 V DC
Input signal 4 to 20 mA
Allowable input current 24 mA
Accuracy ±0.1% of full scale
Overcurrent protection Provided
Data refresh cycle 10 ms
Input step response time 100 ms
Temperature drift Max. ±0.01%/°C
Operation -40 to +70 °C
Transportation/storage -40 to +85 °C
Dust 0.3 mg/m3 or less
Protection class IP20
Altitude 3000 m or less
Electric field 3 V/m or less (26 MHz to 1 GH
Magnetic field 30 A/m (AC) or less, 400 A/m (DC) or less
Freescale™ QorIQ P4080 –
8-core CPU @ 1.5GHz
Serial Rapid IO, PCIe
and 1/10GbE fabrics
Fast dual-channel memory
(up to 8 GB RAM with ECC)
Useable in managed (with MCH)
and unmanaged (without MCH) systems
FLOWMETER MASSFLO
MASS 3000
115/230VAC/ENCLO-IP00
Gas Flow: 0.01 to 1000 kg/h
Liquid Flow: 0.1 to 1000 kg/h
Typical Accuracy: accuracy of ±0.5% of readin
Standard Temperature Range: -40°C to +150°C
Operating Pressure:0 to 100 bar
Analog Output:4-20 mA
Voltage Range: 24 V DC
R/I TRANSMITTER 24VDC 0-20MA
Input for Pt100, Ni100 or Ohm
Sensor cable compensation
Linearised analogue output
24 VDC or universally supplied
Individual 0 and 100% adjustment
DIN rail mounting on a standard 11-pole relay socket
Configuration: Non-isolated thermocouple input
Linear range: 4 to 20 mAdc
Current Output limits: <2 to >40 mA (open TC)
Compliance (supply-voltage): 8 to 50 Vdc
Reverse polarity protection: 350 V peak
Maximum loop resistance: (Supply Voltage - 8V)/20 mA
AC Power:100-240 V AC.
Max. Monitor Connections: 4 indoor monitors
Power Consumption:20-40W
Operating Temperature:
Typically, 0°C to 40°C (32°F to 104°F).
Humidity:
Typically up to 80% relative humidity
Range of Product:Altivar 312
Motor power kW:0.37 kW
Maximum Horse Power Rating:0.5 hp
Supply frequency:50...60 Hz - 5...5 %
EMC filter:Integrated
Apparent power:1 kVA
Maximum transient current:5 A 60 s
Power dissipation in W:41 W at nominal load
Speed range:1…50
Processor Model: PowerPC 600 series
Clock Speed: 200 MHz and 500 MHz
Memory Capacity: 64 MB to 1 GB
Memory Interface: 32-bit or 64-bit
Ethernet: 10/100/1000 Mbp
Input Voltage: 5 V to 12 V DC
Frequency coverage:136–174MHz
Number of channels:Max. 128 Ch/ 8 zones
Channel spacing:12.5/25kHz
Type of emission:16K0F3E, 11K0F3E
Current drain:10.0A
Max. audio:0.7A
Stand-by:250mA
Part Number/Catalog No.:2080-IF2
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:2
Data Range:0-65535
Repeatability:+/- 0.1%
Update Time:180ms per Enabled Channel
Operating Altitude:2000m
Part Number/Catalog No.:2080-IF4
Product Type:Analog Plug-in Module
Module Type:Analog
Number of Single-Ended Inputs:4
Analog Normal Operating Voltage Range:0-10V DC
Analog Normal Operating Current Range:0-20mA
Data Range:0-65535
Repeatability:+/- 0.1%
Part Number/Catalog No.:2080-OF2
Product Type:Analog Plug-in Module
Number of Single Ended Outputs:2
Analog Normal Operating Voltage Range:10V DC
Repeatability:+/- 0.1%
Series:Micro870
Part Number:2080-L70E-24QBB
Product Type:Programmable Controller
CONTROLLER
PROGRAMMABLE
MICRO 820
12 INPUTS
24 VOLT DC
8 OUTPUTS: 7 RELAY AND 1 ANALOG
0 - 10 VOLT DC
4 ANALOG INPUTS
0 - 10 VOLT DC INPUT
SHARED WITH DC INPUTS
FIXED TERMINALS
Input Voltage: 24V or 120V AC/DC
Input/Output: Multiple I/O interfaces
Operating Temperature: -20°C to +70°C
Humidity: humidity of up to 95% (non-condensing)