ALL MANUFACTURERS

Analog Output Module

SIMATIC S7
ANALOG OUTPUT SM 332
OPTICALLY ISOLATED,4 AO
0/4 UP TO 20 MA, 20 PIN
FOR SIGNALS FROMHAZARDOUSAREAS 
CAPABLE OF DIANOST
PTB-TESTED

Single Motor Module

Control Module

RAM: 256 MB 
Storage: 128 MB flash memory 
for program and data storage
Expansion: Supports external memory expansion
Ethernet Ports: 2 x 10/100 Mbps Ethernet interfaces.
Voltage Range: 24 V DC (18 V to 34 V)
Power Consumption: Max 10W

Digital output module

8 A summation current per module
All outputs with single-channel diagnostics 
for short circuit or overload
Extremely short cycle times
Outputs with short circuit protection
Integrated protection for switching inductances

Motion Controller Module

Series:RX3i PacSystem
Part Number:IC695PMM335
Catalog:IC695
No. of Axes:4
No of Master axes:1
Backplane Support:Universal Support
Motion Path Planning:1ms
Number of Slots:1 (single slot)
Position Loop Update Rate:500μs
Controlled Axes/Module:4
FSSB Velocity Loop Update Rate:125μs
Motion Path Planning:1 ms
FSSB Torque Loop Update Rate:62.5μs
Power Consumption at 5 V:0.45 A
Servo Command Interface:Fiber Optic
Power Consumption at 3.3 V:1.1 A
Floating Point:Yes

Rechargeable lithium-ion battery

Rechargeable lithium-ion battery 
3.7V, 2,4Ah 
Non-restricted
Common recommendations for storage of Li-ion batteries
are at -20° to 25° C and to charge the batteries once
per year to 40% (or 3.75V/cell) of their capacity and
never let them discharge to below 2.0V

S8 Header Board, COATED

Power Supply XLS 480 W Power Supply

Part Number:1606-XLS480E
Input Voltage:100…240V AC / 110...150V DC
Terminals Spring:Clamp
Output Power:480 W
Signal:DC-OK
Output Current:20 A (@ 24V) /17 A (@ 28V)

POWER SUPPLY MODULE

POWER SUPPLY MODULE
220-240 VAC INPUT
50/60 HZ
1.3 AMP INPUT
5.1 VDC / 7.8 AMP OUTPUT
24 VDC / 1.7 AMP OUTPUT

Analog Input Module

SIMATIC S7-200 SMART
Analog input 
SM AR02 RTD
2x AI RTDmodules
SM AR02, AI RTD 2x16 bit
24 V DC Yes; -15 / +20 %
Current consumption, typ. 40 mA
from backplane bus 5 V DC, typ. 80 mA
Power loss, typ. 1.5 W

88TK05 Station- Bus Coupler Module

Supply Voltage:24V DC (±15%)
Power Consumption:1.8W (typical)
Interface:9-pin D-Sub 
Bus Termination:Integrated
Bus Protocol:PROFIBUS DP (EN 50170)
Transmission Rate:9.6Kbps to 12Mbps 
Address Range:0-125 
Max Number of Slaves:125
Electrical Isolation:500V AC

CONTACTOR S0 25A 110VAC 1NO/1NC SCRW

Redundant fault-tolerant control system

Input Voltage: 24V DC
Current Consumption: 1.5A typical
Isolation: 1500V AC channel-to-channel
Trip Contact Ratings:5A @ 30V DC resistive
Analog Inputs: 8 channels  
Relay Outputs: 8 channels
Communication Ports: 2x Ethernet for diagnostics

Resistance Temperature Device

RTD INPUT MODULE
8 CHANNEL
14-BIT
15 OHMS MAX.
2 ETHERNET PORTS
FOR MARK VI TURBINE CONTROL SYSTEM

Thermocouple Input Module

IO PACK
THERMOCOUPLE
2 ETHERNET PORTS
AMBIENT TEMPERATURE RATING: 
-30 TO + 65°C (-22 TO +149 °F)

Discrete Contact Input I/O Module

Power Supply:28VDC
Functional Revision 1:A
Mark VI Series Grouping:Group 1
Number of Channels:16 (isolated)
Input Type:Dry contact (volt-free) or wet contact (24–125V DC)
Voltage Range:24–125V DC (configurable)
Input Current :2–20mA per channel
On-State Voltage:≤3V DC (for dry contact)
Off-State Leakage:<1mA

Analog I/O Module

CARD
INPUT/OUTPUT PACK
ANALOG IN/OUT
200 MA TYPE
FOR MARK VIE TURBINE CONTROL SYSTEM

INPUT MODULE 24 VDC 16 POINT POS/NEG LOGIC 1 MSEC FILTER

RS-422/485 Communication Module

KJ3002X1-BG2 Thermocouple Module

KJ2002X1-BA1 Controller M3 Module

CP441-1 Communication Module

Inverter Circuit Board

Model Number:AGPS21C (64668064)
Type:SACS800 Inverter Circuit Board
Input Voltage Range:85-264V AC (47-63Hz)
Output Voltage:24V DC (±1%)
Output Current:5A (continuous)
Power Rating:120W
Efficiency:>88%
Inrush Current:<30A (at 230V AC)

Time Delay Module

TIME DELAY MODULE 
0.1-600SEC 1FUNCTION 6/3+4AK/SIL
Type:Programmable Safety Timer Module
Supply Voltage:24V DC (±15%) 
Power Consumption:3W (typical)
Input Channels:2 (24V DC/110V AC, galvanically isolated)
Output Channels:2 (relay, 5A @ 250V AC)
Time Delay Range:0.1s - 600h (programmable)
Accuracy:±0.1% of set value or ±10ms

CPU 1511C-1 PN Compact CPU Module