ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Blocking Voltage : 4500V
Maximum Repetitive Off-State Voltage:4500V
Gate Trigger Voltage (VGT): 1.5V–2.5V
Peak Surge Current (ITSM): 25–30kA
Critical Rate of Current Rise (di/dt): 1kA/µs
Turn-On Time (ton): <5µs
Turn-Off Time (toff): <10µs
Switching Frequency: Up to 500Hz
Series: UFC Series
Voltage Rating: Typically 24V DC
Operating Temperature Range: Typically -20°C to 60°C
Storage Temperature Range: Typically -40°C to 85°C
Humidity: 5% to 95% RH (non-condensing)
Digital HART communication
Easiest commissioning and operation
on site due to local operation and auto adjustment
Worldwide Intrinsic Safety approvals
Robust design and flexible in use
with linear and rotary actuators
Remote sensor version
– Advanced vibration resistance 2 g, 300 Hz
– Protection class IP 67
Operating Voltage:
Typically powered by 24 V DC
AC: Typically 0 to 400 V AC
DC: Typically 0 to 400 V DC
Operating Temperature:
-20°C to +60°C (-4°F to +140°F)
Storage Temperature:
-40°C to +85°C (-40°F to +185°F)
Relative Humidity:
5% to 95%, non-condensing
Voltage Rating:1200 V
Current Rating:450 A
Switching Frequency:≤ 20 kHz
Isolation Voltage:4 kV AC
Supply Voltage: +15 V / -8 V DC
Gate Current: ±35 A (peak)
Input Voltage:24V DC
Current Consumption:100-150 mA
Power Supply:24V DC
Operating Temperature:0°C to 55°C
Storage Temperature: -20°C to 85°C
Humidity:5% to 95% relative humidity
Supply Voltage: 24 VDC
Power Consumption: ~10–20 W
Voltage Range: 0–250 VDC
Current Range: 0–20 A
Accuracy: ±0.5% of full scale
Input-to-Output Isolation: 2500 VAC
Analog Inputs: 4–20 mA / 0–10 V
Supply Voltage:24 V DC
Current Consumption:Around 300 mA
Operating Temperature Range:-10°C to +55°C
Storage Temperature Range:-40°C to +70°C
Humidity:5% to 95%, non-condensing.
Collector-Emitter Voltage :3300 V typical
Gate-Emitter Voltage:±20 V (max)
Continuous Collector Current :1200–1500 A
Peak Current: Up to 3000 A
Max Junction Temperature: 125–150°C
Isolation Voltage: 6–10 kV
Input Signal:1-5 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for current loop compatibility
Response Time: <10 ms
Input Signal: 0-10 V DC
(configurable depending on system requirements)
Output Signal: Standard 4-20 mA current loop
Accuracy: ±0.1% of full-scale value
Load Impedance: 0-600 Ω for
current loop compatibility
Response Time: <10 ms
Coil Voltage 118 VAC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Coil Voltage 24 VDC
Contact Configuration
1 x Normally Open (NO),
1 x Normally Closed (NC) contacts
Max Switching Voltage 250 VAC, 30 VDC
Max Switching Current 8 A (resistive load)
Temperature Range -20°C to +60°C
Humidity5% to 95% non-condensing
I/O Type
Digital or Analog Inputs/Outputs
Input Voltage Range
Typically 24 VDC or 120/240 VAC
Max Switching Current Typically 8 A
Mounting Type DIN rail or panel mount
Operating Temperature Range -20°C to +60°C
Storage Temperature Range -40°C to +85°C
Humidity5% to 95% non-condensing
Input Voltage Range:24 V DC
Operational Range: 15–30 V DC
Typically 2–5 mA per channel
High-Level (ON): ≥18 V DC
Low-Level (OFF): ≤5 V DC
Response Time:≤ 1 ms
