ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Nominal Input Voltage: 24 V DC
Allowable Input Range: 18–32 V DC
Rated Output Power: 20–30 W
Efficiency: ≥ 85%
Primary Output: 24 V DC (±1%)
Secondary Outputs: Optional 5 V DC / 12 V DC
Maximum Continuous Current: 1.5 A @ 24 V DC
Overvoltage Protection (OVP): Auto-cutoff at ≥35 V
Undervoltage Lockout (UVLO): Shutdown at <15 V
Model Number: AIBP-51
ABB Product Number: 68257913
Dimensions: 30 cm x 10 cm x 3.8 cm
Weight: 0.25 kg
Voltage Rating: Suitable for 380-550 VAC applications
Compatibility: ABB ACS800 Series inverters
Operating Voltage: 24V DC
Power Consumption: 5W to 15W
Operating Temperature:0°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
24 VDC Input Power
Supply Voltage: 24V DC (±25%)
Power Consumption: 5W
Input Voltage: 24V DC (15–30V range).
Response Time: ≤1 ms
Rated Load: 0.5A/channel, 24V DC
Resolution: 16-bit (±0.1% accuracy)
Accuracy: ±0.2% of full scale
encoder unit or 3 independant up/counter
2 threshold detections
counter preset
Max. frequency 50kHz
7 transistor outputs 24 V d.c. 300mA
4 binary inputs 24 V d.c.
Integral 5V, 15V, 24V power supply for encoder
24 VDC power supply
120 VAC power supply
230 VAC power supply
Voltage Range: 100–240 VAC
Frequency: 50/60 Hz
Voltage: 24 VDC
Current Rating: 10–20 A
Power Rating: 240–480 W
Temperature: -25°C to +70°C (-13°F to +158°F).
Humidity: 5–95% non-condensing.
Processing Capacity
Manages up to 15,000 I/O points
with a cycle time of ≤5 ms
1 GB RAM, 2 GB flash storage
Power Supply: 24 VDC
Operating Temperature: -40°C to +85°C (-40°F to +185°F)
Current: 0–20 mA, 4–20 mA
Voltage: 0–10 V, ±10 V
Resistance: RTD, thermocouple
Power Supply: 24 V DC (±10%)
Power Consumption:2–5 W
Operating Temperature: -25°C to +70°C (-13°F to +158°F).
Humidity: 5–95% noncondensing.
Certifications: CE, UL, ATEX/IECEx
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing.
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing.
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
I/O BOARD MODULE
DCP II
FOR HARMONY DCU SYSTEM
Input Voltage: Typically 24V DC
Output Voltage: 5V, 12V, or 24V DC
Current Rating:2A, 5A,
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C.
Humidity: 5% to 95% non-condensing
Sample intervals from 10 seconds to 60 min
Graphical browser-based log viewer
Sends logs by E-mail or FTP
Data is saved in Microsoft
Excel compatible CSV files.
SDCSDSL4
COMMUNICATION BOARD
DCS-LINK DRIVE-TO-DRIVE
DEDICATED TO THE DCS800
BASED ON CAN BUS.
THIS COMMUNICATION ADAPTER IS USED IN
12-PULSE OPERATION
AND COMMUNICATION /
CONTROL OFEXTERNAL FIELD SUPPLIES
DCF803-0035
THIS BOARD IS STANDARD IN AL
Series: SDCS
Operating Voltage: Typically 24V DC
Power Consumption: 5-10 W
Current Consumption: 200-400 mA
Operating Temperature Range: -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
Enclosure: Plastic
Mounting: Onto a standard mounting rail
Settings: Via drive interface (control panel)
Current Consumption: 70 mA at 24 V d.c
All materials are UL/CSA approved
Complies with EMC Standards EN 50081-2 and EN 50082-2
Power Supply :24 V DC
Module Type : NETA-01 V1.x
Mounting: On to a standard mounting rail
Settings : Through drive parameters and/or DIP switches
Current consumption: 80 mA at 24 V DC ±10%
3 digital inputs
3 + 1 digital outputs
DDCS communication link
+24 VDC (500 mA) to supply auxiliary equipment
isolated firing pulses
voltage measurements
Uc (DC busbar voltage)
Uac (supplyvoltage), synchronisation
heatsink temperature measurement
current measurement
earth fault current measurement
7-segment display
Input Signal Types: Voltage (0-10V, ±10V)
Accuracy: ±0.1% of full scale
Output Resolution: 12-bit or 16-bit
Output Load Resistance: 500Ω max
Voltage Supply Range: 24V DC nominal
Power Consumption: < 10 W
Operating Temperature:-20°C to +60°C
Storage Temperature:-40°C to +85°C
Differential push-pull HTL encoders
Single-ended push-pull HTL encoders
Open collector HTL encoders
Open emitter HTL encoders
+15 V DC ± 20% 200mA (max.)
+24 V DC ± 20% 200mA (max.)
Power Supply Voltage: 24 VDC ± 10%
Power Consumption: Typically less than 2 W
Resolver Excitation Voltage: 4-8 V RMS
Resolver Frequency Range: 2 kHz to 15 kHz
Input Channels: 1 Resolver input
Resolution: 12-bit to 16-bit resolution depending on configuration
Accuracy: ±0.05 degrees
Output voltages:
+5.5 V DC -5%, -8%, 180 mA
+24 V DC ±15%, 150 mA
Maximum cable length:
30 m with a 5 V encoder
(0.5 mm2 cable for power supply)
CH A, CH B, CH Z, CH U, CH V, CH W: RS-422/485,
Device used for controlling andprogramming
Can be attached directly to
the module ordoor of the cabinet
The keys are flat, labeled push-buttons
LCD display: 4x20 characters
Input Voltage: 24V DC
Current Consumption: 100-500mA
Power Rating: Usually around 5-10W
Operating Temperature: -20°C to +60°C
Storage Temperature: -40°C to +85°C
Humidity: 5% to 95% non-condensing
Operating Voltage: Typically 24V DC or 48V DC
Current Consumption: 5-10 A
Communication Interface: Ethernet/IP, Modbus
Operating Temperature Range: -20°C to 60°C (-4°F to 140°F)
Storage Temperature Range: -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
Input Voltage: 24 V DC (typical)
Operating Voltage Range: 18 - 32 V DC
Power Consumption: Typically 2.5 W
Isolation Voltage: 500 V AC
Input Type: Digital (24 V DC)
Digital: 3 kΩ
Digital: 0.5 A per channel
PHARPS32000000
DISCONTINUED BY MANUFACTURER
POWER SUPPLY MODULE
90-264 VAC INPUT
47-63 HZ
11.5 AMP
1150 VA
5/15/24 VDC OUTPUT
Tariff Code: 8504409530
Country of Origin: United States
Input: ±10 V DC, 4–20 mA
Power Supply:24 V DC
Power Consumption: ≤ 15 W
Isolation:1500 V AC
Operating Temperature:
-25°C to +70°C (-13°F to +158°F)
Humidity:
5–95% non-condensing
Channels:16 Digital Inputs
Voltage Levels:
Input：24 V DC (10–30 V DC range)
Output (Transistor): 24 V DC, ≤0.5 A per channel
Field-to-Logic Isolation: 1.5–2 kV
Operating Temperature: -25°C to +60°C (ambient)
Humidity: ≤95%, non-condensing
Power mounting unit
Mounting:Standard 483-mm (19-in.) cabinet
Storage and transport temperature
–40° to 85°C (–40° to 185°F)
Primary power:120/240 VAC, 24/48 VDC
Regulated DC voltages:+5 VDC, +15 VDC
Vibration:13.2 to 100 Hz
