ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
ABB are a market leading producer of power & automation technologies that enhance performance and reduce environmental impact for industries worldwide.
Amikon Limited stock and supply ABB motors, drives, programmable logic controllers (PLCs), power electronics and Robot spare parts and Discontinued card parts, motion and obsolete including variable speed drives, DC drives, PLCs and general automation spares.
Voltage: ±10V DC
Current: 4-20mA
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Sampling Rate: 4kHz per channel
Voltage Range: 24-250V DC
Isolation: 2.5kV RMS
Relay Contacts: 5A @ 250V AC
Input Voltage: 24V DC (±10%)
Power Consumption: 6W typical
Isolation: 2.5kV AC
Range: ±10V or 4-20mA
Resolution: 16-bit
Accuracy: ±0.1% of full scale
Digital I/O:24V DC
Processor: 32-bit ARM Cortex-M4
Number of Inputs:16
Input Voltage:24-250V DC
Input Current :2-10mA per channel
Isolation:2.5kV RMS
Number of Outputs:8
Contact Rating:5A @ 250V AC / 30V DC
DC Output Voltage:24V DC (±1%)
Output Current:40A (continuous)
Power Rating:960W (max)
Efficiency:>90% (at full load)
Input Voltage:3-phase 200-480V AC (±10%)
Frequency:50/60Hz (±5%)
Input Current :10A (max @ 400V AC)
Inrush Current:30A (peak, for 10ms)
Input Voltage: 24 VDC (±10%)
Analog Inputs: 0–10 VDC or 4–20 mA
Operating Temperature: -25°C to +55°C (-13°F to +131°F).
Humidity: Up to 95% non-condensing.
Vibration Resistance: 5–150 Hz
Power Supply: Typically 24 V DC
Input Voltage Range: typically 0-10V DC
Operating Temperature Range:
Typically -20°C to 70°C (-4°F to 158°F)
Storage Temperature Range:
Typically -40°C to 85°C (-40°F to 185°F)
Humidity: 5% to 95%, non-condensing
Frequency (f):47.5 ... 63 Hz
Frame Size:R3
Input Voltage (Uin):380 … 480 V
Mounting Type:Wall-mounted_NO UNIT$
Output Current, Normal Use (In):45 A
Output Current, Heavy-Duty Use (IHD):38 A
Output Power, Normal Use (Pn):22 kW
Output Power, Heavy-Duty Use (PHD):18.5 kW
Setting Range:28 ... 40 A
Rated Operational Current:40 A
Rated Insulation Voltage:690 V
Electrical Durability:25000 cycle
Ampere Rating UL/CSA:40 A
Rated Operational Power AC-3 (Pe) :hree Phase 18.5 kW
Maximum Operating Voltage UL/CSA Main Circuit:600 V AC
Voltage: 24V DC
Consumption: 3.5W typical
Isolation: 1.5kV AC
PROFIBUS DP (up to 12Mbps)
Modbus RTU (RS485)
Node Capacity: Up to 124 devices
IEC 60870-5-101/104
Power Supply:24V DC (±10%)
Power Consumption:5W (typical)
Isolation:1.5kV AC
Data Transfer Rate:Up to 12Mbps
Fieldbus Protocols:PROFIBUS DP
DRIVE-CLiQ:For direct drive connection
Processor: 32-bit dual-core ARM Cortex
Clock Speed: 800MHz
Memory: 512MB Flash
Power Supply:24V DC (±15%)
Power Consumption:8W (typical)
Isolation Voltage:2.5kV AC
I/O Capacity:16 DI/8 DO
Digital Inputs:24V DC
Analog Inputs:0-10V/4-20mA
Input Isolation:2.5kV AC
Backplane Bus:Proprietary high-speed bus
Protocol Support:Modbus RTU, PROFIBUS DP
Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Processor:32-bit ARM Cortex-M7 @ 400MHz
Memory:64MB Flash, 32MB RAM
Cycle Time:≤100μs
Digital I/O:24V DC
Analog Inputs:0-10V/4-20mA
Output Type:Analogue Relay
Supply Voltage:100 → 240 V ac
Number of Outputs:3
Control Type:ON/OFF
Communication Module Available:Yes
Display Type:LCD, Multi Line, TFT
IP Rating:IP66
Range:ControlMaster CM30
Additional Functionality:ON/OFF
Series:CM30
Panel Depth:121mm
Display Colour:Green, Red, Yellow
Voltage: 3-phase 200-480V AC (±10%)
Frequency: 50/60Hz (±5%)
Power Range: 2.3kW to 7.5kW
Output Current: 6A to 18A RMS
Control Method: Field-Oriented Control
Control Bandwidth: 1.5kHz
Speed Range: 0-6000 RPM
Positioning Accuracy: ±1 encoder count
Collector-Emitter Voltage (Vces): 1700V
Gate-Emitter Voltage (Vges): ±20V
Turn-on Time (ton): 0.5μs (typical)
Turn-off Time (toff): 1.2μs (typical)
Switching Frequency: Up to 20kHz
Power Dissipation: 1800W (max)
DC Link Voltage: 1000-1200V DC
Typical Applications:400-690V AC drives
Processor:32-bit ARM
Base Memory:512MB DDR4 RAM
Expanded Memory:2GB Flash
Execution Speed:0.05ms/1k instructions
I/O Scan Time:≤1ms (for 1000 I/O points)
Task Capacity:32 concurrent tasks
Digital I/O:Up to 2048 points
Analog I/O:Up to 512 channels
Input Voltage:24V DC (±15%) or 100-240V AC
Power Consumption:15W (typical)
PROFIBUS DP:9-pin D-sub, 12Mbps max
Modbus RTU:RS485 (terminal block)
Power Supply:24V DC (±10%), sourced from drive
Power Consumption:3W (typical)
Isolation :1.5kV AC (fieldbus to drive)
Signal Levels:RS485: ±15V differential
Operating Voltage:24V DC (±10%)
Power Consumption:2.5W (typical)
Number of Channels:4
Output Type:0-20mA
Resolution:16-bit
Load Impedance:≤600Ω
Isolation:1.5kV AC
Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:4kV AC
Gate Drive Output:±15V (IGBT control)
Switching Frequency:Up to 2kHz
Supported IGBTs:1700V/3300V modules
Desat Protection:<2μs response time
Short-Circuit Protection:≤10μs trip time
Power Supply:24V DC
Power Consumption:5W max
Isolation:1.5kV AC
Screen Type:TFT LCD with LED backlight
Resolution:320 × 240 pixels (QVGA)
Color Depth:65k colors
Power Supply:24V DC (±10%)
Surge Protection 4kV
Input Channels:24V DC
Isolation:1.5kV channel-to-channel
Output Channels:4-20mA
Update Rate:10ms per channel
Backplane Interface:800xA CI867 bus
Protocol Support:Modbus RTU/TCP
Rated Current (Ie):0.1-15A (adjustable)
Supply Voltage:24V DC/AC (±15%)
Power Consumption:≤3W
Contact Rating:5A @ 250V AC (Aux. contacts)
Isolation Voltage:2500V AC
Control Inputs:24V DC
Operating Voltage:24V DC ±10%
Power Consumption:8W max
Digital Inputs:6x (24V DC, opto-isolated)
Analog Inputs:2x (0-10V/4-20mA)
Relay Outputs:2x (5A @ 250V AC)
Isolation Voltage:1500V AC
Processor: ARM Cortex-M4 168MHz
Memory: 256KB Flash
Supply Voltage:24V DC (±10%)
Power Consumption:≤5W
Digital Inputs:8x (24V DC, opto-isolated)
Analog Inputs:4x (0-10V / 4-20mA, 12-bit resolution)
Relay Outputs:2x (5A @ 250V AC, Form C)
Isolation Voltage:2500V AC
Processor: 32-bit ARM Cortex-M4
Input Voltage:3-phase 380-500V AC ±10%
Output Voltage:0-400V DC (armature)
Current Rating:2000A continuous
Field Supply:0-300V DC, 20A
Control Voltage:24V DC ±10%
Speed Regulation: ±0.1% of base speed
Torque Control: ±1% of rated torque
Response Time: <20ms for 90% speed change
Resolution: 16-bit
Standard: PROFIBUS DP-V1 (12Mbps)
Optional: DeviceNet, Modbus RTU
Field Voltage Output:50-300V DC
Field Current Rating:Up to 20A
Control Voltage:24V DC (±10%)
Isolation Voltage:2500V AC
Response Time:<10ms
Analog Inputs: 2x (0-10V/4-20mA) for field ref
Digital Inputs: 3x (24V DC) for enable/disable
Relay Outputs: 2x (5A @ 250V AC)
Analog Signal: 0-10V
Dual Output Voltage – +24V DC
Remote On/Off – 24V DC control input
Input Voltage:3-phase 380-500V AC (45-65Hz)
Output 1 (+24V DC):10A (240W)
Output 2 (+15V DC):5A (75W)
Efficiency:≥92% (at full load)
Ripple Noise:<1% of rated output
Repetitive Blocking Voltage (VDRM):8000V
Average On-State Current (ITAV):1600A @ 85°C
Surge Current (ITSM):40kA (8.3ms half-sine)
Gate Trigger Current (IGT):200mA (max)
High Surge Current – Up to 40kA
Critical dV/dt:1000V/μs
