ABB

Speed Module

Power Supply:24V DC (±10%)
Tachometer input: 0-10V DC or 4-20mA
Pulse input: Up to 100kHz frequency
Analog output: ±10V DC or 4-20mA
Relay outputs: 2x SPDT (5A @ 250V AC)
Speed Range: 0-10,000 RPM (configurable)
Resolution: 0.1% of full scale or better
Digital outputs: 24V DC, 0.5A

Analog output module

Voltage: 0-10V DC, ±10V DC
Current: 4-20mA, 0-20mA 
Load Capacity:Voltage: ≥1kΩ
Isolation:1500V AC channel-to-channel
Backplane Power: 5V DC @ 500mA (typical)
Field Power: 24V DC (±10%) for outputs
Power Consumption: 6W (typical)

High Voltage Inverter Board

Voltage Rating: 1200V–1700V
Input Voltage (DC Link): 300–1000V DC
Output Voltage (AC): 3-phase, 0–480V AC
Current Rating: Up to 500A 
Switching Frequency: 2–20 kHz

Redundant Processor Unit

Input Voltage: 24V DC (±10%)
Power Consumption: 20W (typical)
Processor: Dual-core 1.2 GHz PowerPC
RAM: 1GB DDR3
Ethernet: 2x 10/100/1000 Mbps (RJ45)
Execution Speed: 0.1ms Boolean, 1ms PID loop

Digital output module

16 channels for 24 V d.c.
Redundant or single configuration
Output status indicators
Advanced on-board diagnostics
Degraded mode for normally energized channels 

Control Module

I/O Capacity:16 digital inputs (24V DC)
Processing Speed: 1ms scan time (typical)
Memory: 64KB SRAM 
Power Supply:24V DC (±10%)
Consumption: 5W (typical)
Isolation:1500V AC (channel-to-channel)

Circuit Board

Input Voltage: 24V DC (±10%)
Power Consumption: 5W–10W (typical)
Isolation: 500V AC (channel-to-bus)
Processor: DSP or FPGA-based 
Flash: 8MB–16MB
Digital I/O: 8–16 channels
DeviceNet or Profibus
RS-232/RS-485

Overvoltage and undervoltage relay

Rated voltage:250 V ac/dc.
Carry continuously 5 A
Make and carry for 0.5 s 30 A
Make and carry for 3 s 15 A
Terminals 65-66, 68-69

AIN-120 Analog Input Block

AIN-120 Analog Input Block
Input Channels: 16 single-ended/8
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Supply Voltage: 24V DC (±10%)
Power Consumption: 3.5W (typical)
Inrush Current: <2A for 20ms
Sampling Rate: 10ms/channel (max)

Power drive board

Input Voltage: 3-phase, 380-480V AC
Output Current: Up to 30A
Switching Frequency: 2-16 kHz

Circuit Board

Operating Voltage: 24V DC (±10%)
Power Consumption: 15W typical
Signal Isolation: 2500V AC 
Switching Frequency: Up to 20kHz 
Gate Drive Outputs:±15V gate drive voltage

AOT 150 Analog Output Module

Output Channels: 16 single-ended
Voltage: 0-10V, ±10V
Current: 4-20mA, 0-20mA
Supply Voltage: 24V DC (±10%)
Power Consumption: 6W (typical), 8W (max)
Inrush Current: <2A for 20ms

Symphony Plus Bridge Controller Module

SPBRC410
Controller with Modbus TCP Interface
BRIDGE CONTROLLER
HARMONY RACK / SYMPHONY PLUS
W/ MODBUS TCP INTERFACE
INFI90 / BRC410 / SPBRC41000000

Digital Output Module

HARMONY BLOCK DIGITAL OUTPUT MODULE
3 AMP
24VDC
240VAC
16 OUTPUTS
FUSING/ON BOARD ELECTROMECHANICAL RELAYS
SPDT

AIN-220 Analog Input Module

Series: Harmony/800xA System
Model No.: P-HB-AIN-2200C100
Type: High-Density Analog Input Module
Voltage: ±10V, 0-10V, 1-5V
Current: 0-20mA, 4-20mA
Resolution: 16-bit (0.0015% of span)
Common Mode Rejection: >120dB @ 50/60Hz
Normal Mode Rejection: >60dB @ 50/60Hz

Power Board

Input Voltage:24V DC (±10%) or 115/230V AC
Output Voltages:+5V, ±15V, +24V DC
Power Capacity:100W (max)
Inrush Current:15A (for 20ms at 230V AC)
Efficiency:>90% (at full load)
Fiber-Optic Signal Isolation :2500V AC

Drive Board +IGBT Module

Voltage Rating:1700V
Current Rating:450A (continuous)
Max Junction Temp.:150°C
Switching Frequency:Up to 5kHz
Gate Drive Voltage:+15V/-5V
Isolation Voltage:2500V RMS
Power Consumption:25W (typical)
Protection Response:<2μs (short-circuit)

Pulse Transformation Board

Power Supply:24 V DC 
Differential: ±12 V.
Power consumption: < 5 W
Single-ended: 0–24 V
Output Voltage:
TTL: 0–5 V.
HTL: 0–24 V

Drive power board

Input Voltage:3-phase 380-480V AC (±10%)
Output Voltages:+24V DC (control)
Power Capacity:500W (continuous)
Switching Frequency:20kHz (PWM)
Efficiency:>92% (at full load)

Control board

Input Voltage:24V DC (±10%)
Power Consumption;25W (typical)
Isolation :1500V AC (field to logic)
Vector control
Torque/speed regulation
PID controllers
Communication;Ports 2x Ethernet, 1x RS-485

Interface Board

Input Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Isolation Voltage:1500V AC (channel-to-channel)
Communication Speed:Up to 1Mbps
Signal Channels:16 digital I/O

Interface Board

Input Voltage:24V DC (±10%)
Power Consumption:12W (max)
Isolation Voltage:2500V AC (channel-to-bus)
Input Current :5mA @ 24V DC
Voltage Range:0-30V DC

PCB Board

Input Voltage:24V DC (±10%)
Power Consumption:15W (typical), 20W (max)
Isolation:1500V AC 
Processor:32-bit RISC 
Clock Speed:800MHz
Memory:512MB DDR3 RAM, 1GB Flash
Real-Time Clock:Battery-backed (CR2032)
Communication Interfaces:2x Ethernet, 1x RS-485

AIR FLOW SENSOR

AIR FLOW SENSOR
0.04 AMP
24 V

IGBT Inverter Module

Voltage Rating:1200V
Current Rating:300A (continuous)
Max Junction Temp.:150°C
Switching Frequency:Up to 20kHz
Gate Drive Voltage:+15V/-5V
Isolation Voltage:2500V RMS
Protection Features:DESAT, UVLO, OT
Response Time:<2μs (short-circuit)

Cooling Fan

Voltage Rating:24V DC (±10%)
Current Draw :0.8A (max)
Power Consumption:19.2W
Startup Voltage:≤18V DC
Airflow:340 CFM (5.7 m³/min)
Static Pressure:120 Pa
Speed:3200 RPM (±10%)
Noise Level:55 dB(A) at 1m

Input/Output Unit

Power Supply:24V DC (±10%)
Power Consumption:8W (typical)
Response Time:<1ms (input), <0.5ms (output)
Surge Protection:30V DC
Channels:16x digital
Voltage Range:24V DC (±10%)
Current Rating:5mA (min)
Isolation :1500V AC 

PCB CARD

Input Voltage:24V DC (±10%) 
Power Consumption:15W (typical)
Processor:32-bit RISC @ 800MHz
Memory:512MB RAM, 2GB Flash
Real-Time Clock:Battery-backed (10-year life)
I/O Capacity:Supports up to 512 I/O points

BRANCHING UNIT

Rated Voltage:690V AC
Current Rating:44A continuous
Short-Circuit Capacity:50kA (1s)
Power Connections:4-in/8-out configuration
Isolation Voltage:3000V AC

Circuit Board

Operating Voltage:24V DC (±10%)
Power Consumption:2W (typical)
Signal Range:0–24V DC, 4–20mA
Resolution:12–16-bit 
Short-Circuit Protection:Self-resetting fuse

Compact and powerfulautomatic voltage regulators

Excitation current  5 A cont., 10 A 
ceiling@ 70° C ambient temp.
Digital:4 outputs, 8 inputs
Analog:2 outputs
Mechanicals:IP20 
Certifications:CE, DNV/GL, Traction 

Control panel

ACS580 CONTROL PANEL
Assistant control panel
Protection Class:IP54 (Front Panel)
MTBF:>150,000 hours
Display Type:LCD (Backlit)
Resolution:128 x 64 Pixels
Languages:Multi-language support
Keypad:Membrane/Sealed (Dustproof)

Power Supply Module

POWER SUPPLY
DC/DC CONVERTER
INPUT: 8 AMP
42 VDC
OUTPUT: 5 - 24 VDC

Voltage Drive Circuit Board

POWER MASTER BOARD
VOLTAGE DRIVE CROWBAR CIRCUIT BOARD
Input Voltage:24V DC (±10%)
Output Voltage:0-10V (Programmable)
Current Rating:2A (Max Continuous)
Frequency Range:0-400Hz
Isolation Voltage:1500V AC

Automatic Voltage Regulators

Maximized operating time
Ensures safe machine operation
Guarantees the quality of delivered energy
Seamless integration with the power plant control systems

AC500 Communication module

Function:PROFIBUS master
Communication Protocol:PROFIBUSMaster
Communication Interface:Serial
Number of Hardware Interfaces:RS-485 1
Data Transmission Rate:12000 kbit/s
Degree of Protection:IP20

Rechargeable lithium-ion battery

Rechargeable lithium-ion battery 
3.7V, 2,4Ah 
Non-restricted
Common recommendations for storage of Li-ion batteries
are at -20° to 25° C and to charge the batteries once
per year to 40% (or 3.75V/cell) of their capacity and
never let them discharge to below 2.0V

88TK05 Station- Bus Coupler Module

Supply Voltage:24V DC (±15%)
Power Consumption:1.8W (typical)
Interface:9-pin D-Sub 
Bus Termination:Integrated
Bus Protocol:PROFIBUS DP (EN 50170)
Transmission Rate:9.6Kbps to 12Mbps 
Address Range:0-125 
Max Number of Slaves:125
Electrical Isolation:500V AC

Inverter Circuit Board

Model Number:AGPS21C (64668064)
Type:SACS800 Inverter Circuit Board
Input Voltage Range:85-264V AC (47-63Hz)
Output Voltage:24V DC (±1%)
Output Current:5A (continuous)
Power Rating:120W
Efficiency:>88%
Inrush Current:<30A (at 230V AC)

Inverter Memory Card

Memory Type:Flash EEPROM
Storage Capacity:2MB
Write Cycles:100,000 cycles
Interface:Proprietary ABB connector
Operating Voltage:3.3V DC (supplied by drive)
Power Consumption:<50mA
ESD Protection:±8kV contact discharge

Asymmetric Thyristor IGCT

Asymmetric Integrated GateCommutated Thyristor
VDRM = 4500 V , ITGQM = 4000 A
Mounting force 40kN
High snubberless turn-off rating
Optimized for medium frequency
High electromagnetic immunity
Simple control interface with status feedback
AC or DC supply voltage
Option for series connection

Reverse Conducting Thyristor IGCT

Reverse Conducting Integrated Gate-Commutated Thyristor
VDRM = 4500 V ,ITGQM = 3600 A ,ITSM = 20·10³ A
VT0 = 1.24 V , rT = 0.51 mΩ ,VDC = 2800 V
Mounting force 41kN
High snubberless turn-off rating
Optimized for medium frequency
High electromagnetic immunity
Simple control interface with status feedback
AC or DC supply voltage
Option for series connection

Printed Circuit Board

Layer Count:4-layer PCB
Material:FR-4 (Flame Retardant)
Copper Weight:1 oz/ft² (35μm)
Operating Voltage:24V DC (±10%)
Power Consumption:15W (max)
Input Channels:8 analog (16-bit resolution)
Output Channels:6 digital (2A max)
Isolation Voltage:2500V AC

CHOPPER CONTROL BOARD

Model Number:NBRC-61C (61357246F)
Type:Chopper Control Board
Operating Voltage:24V DC (±10%)
Power Consumption:8W (typical)
Signal Levels:0-10V analog, 24V digital
Isolation Voltage:1500V AC (input-to-output)
PWM Frequency:2kHz (adjustable)
Current Regulation:±1% of setpoint
Response Time:<5ms (90% step change)
Resolution:12-bit (analog signals)

EXTENSION I/O BOARD

contains more channels 
16 binary inputs
8 binary outputs
8 analog inputs
4 analog outputs
Time out setting by software
Watchdog function

Central Processing Unit

processor module
128 kBmemory
8 DI, 6 DO-T,24 V DC
onboard Ethernet
with pluggable I/O terminalblocks

Control Unit

Processor:Dual-core 1.2GHz
Memory:2GB DDR3 RAM
Storage:8GB Flash
Execution Speed:10ms cycle time (typical)
Operating Voltage:24V DC (±10%)
Power Consumption:15W (typical)
Isolation Voltage:1500V AC (field to system)

Optical fiber board

Fiber Type:Multi-mode (62.5/125μm)
Wavelength:850nm/1300nm
Data Rate:1Gbps (1000BASE-SX)
Connector Type:Duplex LC
Transmission Distance:Up to 550m (MMF)
Operating Voltage:5V DC (±5%)
Power Consumption:3.5W (typical)
Interface:PCI Express

IGBT Module

Rated Voltage (V_CEO): 600 V
Collector Current (I_C): 60 A (continuous)
Peak Collector Current (I_Cpeak): 120 A (pulsed)
Gate-Emitter Threshold Voltage (V_GE(th)): 4.0 V (typical)
Input/Output Signal Voltage: 15 V / 15 V
Max Power Dissipation (P_diss): 200 W (maximum)

Inverter IGBT trigger board

Input Voltage:+24V DC
Turn-On Voltage: +15V ±0.5V
Turn-Off Voltage: -8V to -15V 
Switching Frequency:Up to 10–20 kHz
Optical Isolation: ≤2500 V RMS
Operating Temperature: 0°C to +70°C
Storage Temperature: -40°C to +85°C