ALL MANUFACTURERS

Analog output module

16 analog outputs, output signal 0/4 ... 20 mA, 
channel-by-channel configuration
Load: max. 700 Ohm
Monitoring of loads
Channel-by-channel isolation of outputs
Module is capable of redundant operation
Digital communication with field devices according to 
HART protocol (Version 5.0 / 5.1)
Monitoring of modules

Binary input module

32 binary inputs divided into two groups each with 16 inputs
Process current circuits in accordance 
with EN 50020 with type of protection EEx ib IIC
Combined installation possible with 
"Non-Ex-modules" in one module sub-rack
Signal recording with 1 ms time resolution
Monitoring of module
Central galvanic separation of system inputs
Group-set filter time
Module is capable of redundancy

Binary input module

32 binary inputs divided into two groups each with 16 inputs
Process current circuits in accordance 
with EN 50020 with type of protection EEx ib IIC
Combined installation possible with 
"Non-Ex-modules" in one module sub-rack
Signal recording with 1 ms time resolution
Monitoring of module
Central galvanic separation of system inputs
Group-set filter time
Module is capable of redundancy

Coupling Unit

Data Rate: Up to 12 Mbps
Isolation:1500 V AC
Power Supply: 24 V DC (±10%)
Power Consumption: Typically 5–10 W
Fieldbus Port: 9-pin D-sub or M12 for PROFIBUS
Operating Temperature: 
-25°C to +70°C (-13°F to +158°F)
Humidity: 5–95% noncondensing

Digital Output IOTA Redundant

Extensive internal diagnostics to ensure dataintegrity
Optional redundancy
Electronic Overcurrent protection
Configurable Safe-state (FAILOPT)
Latched, pulsed or pulse-width modulated output 

Digital Input IOTA Redundant

Extensive internal diagnostics for data integrity
NO Open wire detection
Optional redundancy
Internal or external field power selection
Supplies Non-incendive field power
Direct / Reverse Input Indication
Galvanic isolation

Analog Output IOTA Redundant

Extensive self-diagnostics
Optional redundancy
Supplies non-incendive field power
Open-wire Bad PV Detection
Non-incendive Power

4 Channel Relay Output Module

Channel-to-Channel: 1500 VAC
Field-to-System: Reinforced isolation :2500 VAC
Per Channel: 1–2 W 
Total: ≤ 8 W 
Operating Temperature: -40°C to +70°C (industrial-grade)
Storage Temperature: -50°C to +85°C
Humidity: 0–95% (non-condensing)

Control panel

Type: LCD or TFT color touchscreen
Operating Voltage: 24 VDC (±10%) or 110–230 VAC
Power Consumption: 10–20 W 
Operating Temperature: -10°C to +55°C 
Storage Temperature: -40°C to +70°C
Humidity: 5–95% (non-condensing)

FIRING PULSE TRANSFORMER BOARD

Model: SDCS-PIN-H41
Part Number: 3ADT320600R1501
Pulse Voltage: 5–24 V DC
Isolated Pulse Voltage: Typically 10–30 V
Output Current: 1–2 A
Primary-to-Secondary Isolation: ≥2500 V AC
Insulation Resistance: >100 MΩ